D30481
D30061
G24210
D11561
41±16
±
MANUAL TRANSMISSION/TRANSAXLE MANUAL TRANSAXLE ASSY (1ZZ±FE/3ZZ±FE)
AVENSIS REPAIR MANUAL (RM1018E)
20. DISCONNECT CONNECTOR
(a) Disconnect the back±up lamp switch connector.
21. SEPARATE CLUTCH RELEASE CYLINDER ASSY
(a) Remove the 5 bolts, separate the release cylinder assy with clutch piping from the transaxle.
22. SEPARATE CHARCOAL CANISTER ASSY 23. SEPARATE TRANSMISSION CONTROL CABLE ASSY
(a) Remove the 2 clips, disconnect the 2 cables from thetransaxle.
(b) Remove the 2 clips, disconnect the 2 cables from the con-
trol cable bracket.
24. REMOVE STARTER ASSY
(a) Remove the nut and disconnect the starter wire.
(b) Disconnect the connector.
(c) Remove the 2 bolts and starter assy.
25.REMOVE FRONT DRIVE SHAFT ASSY LH(See page 30±6) SST 09520±01010, 09520±24010 (09520±32040)
26.REMOVE FRONT DRIVE SHAFT ASSY RH (See page 30±6) SST 09520±01010, 09520±24010 (09520±32040)
C80374
C67658
C67659
C81783
SST
C81783
SST
41±16
± MANUAL TRANSMISSION/TRANSAXLEMANUAL TRANSAXLE ASSY (C250)
C250 M/T REPAIR MANUAL (RM1020E)
42. REMOVE OIL RECEIVER PIPE NO.2 (MTM)
(a) Remove the bolt and oil receiver pipe No.2 from the
manual transmission case.
NOTICE:
Be careful not to damage the oil receiver pipe No.2.
43. REMOVE BEARING LOCK PLATE
(a) Remove the bolt and bearing lock plate from the front
transaxle case.
44. REMOVE TRANSMISSION MAGNET
(a) Remove the transmission magnet from the front transaxle
case.
45. REMOVE INPUT SHAFT FRONT BEARING
(a) Using SST, remove the input shaft front bearing from the
front transaxle case.
SST 09612±65014 (09612±01050, 09612±01060)
46. REMOVE FRONT TRANSAXLE CASE OIL SEAL
(a) Using SST, remove the front transaxle case oil seal from
the front transaxle case.
SST 09612±65014 (09612±01040, 09612±01050)