2005 NISSAN NAVARA headrest

FRONT SEAT
SE-27
C
D
E
F
G
H
J
K
L
MA
B
SE
6. Remove the headrest holder.
Squeeze and pull up headrest holder tabs to remove from
seatback frame.
NOTE:
Before installing the headrest holder, check its orientation (front/
rear and right/left).
7. Disconnect the seatback heater harness. Remove the seatback trim and pad assembly. Remove the hog
ring to separate the seatback trim from the pad and the heater unit.
Assembly
Assemble in the reverse order of disassembly.
SEATBACK (FRAT FOLD SEAT)
Disassembly
WARNING:
Removal of front side air bag module should only be done to allow deployment of front side air bag
module prior to disposal of seatback assembly.
NOTE:
Only complete seatback assemblies can be replaced.
1. Pull the seatback knob(1) and remove the seatback knob
cover(2).
2. Remove the seatback board from the back of the seatback.
PIIB4084J
MIIB0748E
MIIB0745E

SE-28
FRONT SEAT
3. Remove the retainer(1) from the seatback frame(2).
4. Remove the hog ring(A) and separate the seatback trim lower
side.
5. Remove the mounting nut of side air bag module.
6. Remove the headrest holder.
Squeeze and pull up headrest holder tabs to remove from
seatback frame.
NOTE:
Before installing the headrest holder, check its orientation (front/
rear and right/left).
7. Disconnect the seatback heater harness. Remove the seatback trim and pad assembly. Remove the hog
ring to separate the seatback trim from the pad and the heater unit.
8. Remove fixing clip(2) from the seatback frame(1) and remove
cablewirefromthereleaselatchlever(3),andthenremove
screw and remove the seatback knob.
Assembly
Assemble in the reverse order of disassembly.
MIIB0746E
MIIB0747E
PIIB4084J
MIIB0749E

REAR SEAT
SE-33
C
D
E
F
G
H
J
K
L
MA
B
SE
1. Headrest 2. Seatback pad and frame 3. Seatback trim
4. Seat leg cover 5. Seat cushion pad and frame assem-
bly6. Seat cushion trim
7. Bushing 8. Spacer 9. Seat cushion pad and frame
10. Inboard jump seat pivot riser 11. Outboard headrest guide 12. Headrest bracket
13. Headrest holder (locked) 14. Headrest holder (free)

SE-34
REAR SEAT
Bench Seat LH (Double Cab)
LIIA1958E
1. Headrest 2. Headrest holder (free) 3. Seatback pad
4. Seatback trim 5. Reclining device inner cover 6. Seat cushion bumper rubber

REAR SEAT
SE-35
C
D
E
F
G
H
J
K
L
MA
B
SE
7. Inboard pivot riser 8. Seat cushion trim 9. Seat cushion pad
10. Seat cushion pan 11. Reclining device lever knob 12. Reclining device outer cover
13. Outboard pivot riser 14. Seat cushion hinge assembly 15. Seatback frame
16. Seat lock assembly 17. Seat lock release strap 18. Headrest holder (locked)
19. Seat outer leg cover 20. Seat cushion frame assembly 21. Seat striker

SE-36
REAR SEAT
Bench Seat RH (Double Cab)
LIIA1959E
1. Headrest 2. Seat lock assembly 3. Seat lock release strap
4. Seat striker 5. Push nut 6. Armrest pad

REAR SEAT
SE-37
C
D
E
F
G
H
J
K
L
MA
B
SE
7. Armrest trim 8. Seatback pad 9. Seatback trim
10. Seatback armrest board 11. Seat cushion trim 12. Seat cushion pad
13. Seat cushion pan 14. Inboard pivot riser 15. Seat cushion bumper rubber
16. Reclining device inner cover 17. Seat cushion hinge assembly 18. Reclining device lever knob
19. Outboard pivot riser 20. Reclining device outer cover 21. Headrest holder (free)
22. Headrest holder (locked) 23. Seatback frame 24. Seat outer leg cover
25. Seat cushion frame assembly