2005 NISSAN 350Z display

2. Select the
Route Info key.
3. Select theComplete Route key.The complete suggested route to the destination
will be displayed.You can display the list of guide points to the
destination during route calculation.
1. Press the ROUTE button.
2. Select the
Route Info key.
INV1705
INV1706
INV1704
DISPLAYINGTURN LIST
How do I adjust the display?
11-11


04.7.6/Z33-N


3. Select the
Turn List key. A list of destinations, waypoints and guide points
will be displayed. Guidance will be made at each
guide point for which direction to turn.
The distance between the guide points and the
travel time will also be displayed.
It may take time to prepare the turn list. In such
cases, the
Turn List key will be highlighted and
you cannot select it until calculation is com-
pleted.
INFO:

In the turn list, turning points more than 60
miles (100 km) away from the current vehicle
location will not be displayed.
When calculated routes include a freeway,
information about freeway entrances and ex-
its will also be displayed.
INV1708
INV1709
11-12
How do I adjust the display?


04.7.6/Z33-N


You can simulate driving the entire suggested
route to the destination on the screen.
1. Press the ROUTE button.
Keys will be displayed on the screen.
2. Select the
Route Info key. 3. Select the
Route Simulation key.
INV1704
INV1711
REQUESTINGTHE SIMULATION
DRIVE TO THE DESTINATION
How do I adjust the display?
11-13


04.7.6/Z33-N


The screen will display a simulated drive with
voice guidance on the suggested route to the
destination.
4. When the CANCEL or DEST button is
pressed, or the vehicle starts to run, the route
simulation will be canceled.INFO:
Route simulation is not available for dark green
roads on your route. Therefore, if the start point
is on a dark green road, the vehicle icon will jump
from the start point to the suggested road when
starting the route simulation.
Also, if the destination is on a dark green road,
the vehicle icon will jump from the end point of
the suggested route to the destination in the
route simulation.
CANCEL SIMULATION1. Press the ROUTE button during simulation.
Select the
Route Info key.
INV1712
INV1713
11-14
How do I adjust the display?


04.7.6/Z33-N


2. The [ROUTE INFO.] screen will be displayed.
Select the
Cancel Simulation key.
INFO:
When the CANCEL or DEST button is
pressed, or the vehicle starts to run, the route
simulation will be canceled.
INFO:
If you select the
Pause key, simulation is
paused. If you select the key again, the simula-
tion will restart.You can have the system track the road you have
taken, and display it with indication marks ().
1. Press the SETTING button.
2. Select the
Navigation key on the [SET-
TINGS] screen.
INV1714
INV1466
DISPLAYINGTHE TRACK
How do I adjust the display?
11-15


04.7.6/Z33-N


3. Select the
Tracking On/Off key. 4. Select the
On key. 5. Press the MAP button.
The location of the vehicle will be displayed.
INFO:

You can select the
On key to display the
indication marks (), and the
Off key to
stop displaying them.

The indication marks () may be spaced
differently, according to the scale of the map.

If you reset the current vehicle location, the
indication marks () will be cleared.
INV1716
INV1717
INV1718
11-16
How do I adjust the display?


04.7.6/Z33-N


The following GPS information will be displayed
on the screen: latitude, longitude, altitude, signal
reception, and satellite locations.
1. Press the SETTING button.
2. Select the
Navigation key on the [SET-
TINGS] screen.3. Select the
GPS Information key.
GPS information will be displayed.
INV1466
INV1720
GPS INFORMATION DISPLAY
How do I adjust the display?
11-17


04.7.6/Z33-N


INFO:

The satellite with a strong enough signal will
be indicated in green.

The display will read, [3-dimensional posi-
tioning], [2-dimensional positioning], or [po-
sitioning not possible], depending on the
signal strength. (Elevation will not be dis-
played in 2-dimensional positioning.)

When the MAP button is pressed, the
[CURRENT LOCATION] screen will appear.
When the PREVIOUS button is pressed,
the [NAVIGATION SETTINGS] screen will
appear.If the vehicle icon does not indicate the correct
location or the direction does not match the
actual road, you can adjust them on the map
screen.
1. Press the SETTING button.
2. Select the
Navigation key on the
[SETTINGS] screen.
INV1721
INV1466
UPDATINGTHE CURRENT
VEHICLE LOCATION AND THE
DIRECTION
11-18
How do I adjust the display?


04.7.6/Z33-N