2005 LEXUS ES300 torque spec

C89125
O-Ring 
N´m (kgf´cm, ft´lbf): Specified torque
 Non-reusable partThrust Needle
Roller Bearing Thrust Bearing
Underdrive Race No. 2Underdrive Planetary
Gear AssyUnderdrive Clutch Assy
Snap RingFlangePlate
Disc
Underdrive 1-Way
Clutch Assy
Thrust Bearing Race
Needle Roller Bearing
Snap Ring
Underdrive Brake Return
Spring Sub-assyUnderdrive Clutch
Drum Oil Seal RingNeedle Roller
Bearing Underdrive Brake Piston

Parking Lock Pawl
Parking Lock Pawl Shaft
Torsion
Spring
Parking Lock Pawl Pin
Pawl Shaft Clamp
9.8 (100, 87 in.Vlbf)
Front Differential Assy
Clutch Apply Tube
Brake Apply Tube
Transaxle Apply
Tube Clamp
Governor Apply Gasket No. 1 
U151F:
5.4 (55, 48 in.Vlbf)
40-8- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)
32 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

D03643
 O-ringOil Pump Body
Oil Pump Drive GearOil Pump Driven GearStator Shaft Assy
x11
Clutch Drum
Oil Seal Ring
N´m (kgf´cm, ft´lbf): Specified torque
 Non-reusable part
9.8 (100, 87 in.Vlbf)
 Front Oil Pump Oil Seal
Apply petroleum jelly
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)40-9
33 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

D03683 Non-reusable partCylindrical
Roller Bearing
Inner Race
Differential
Drive PinionParking Lock Gear
Radial Ball Bearing FRUnderdrive Planetary
Ring Gear
Snap Ring
Counter Driven GearUnderdrive Planetary Gear
Radial Ball Bearing RR 
280 (2,855, 207)
N´m (kgf´cm, ft´lbf): Specified torqueLock Nut


- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)40-13
37 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

C89117N´m (kgf´cm, ft´lbf): Specified torqueShift Solenoid Valve SL2 Shift Solenoid Valve S4
Shift Solenoid Valve SR
Shift Solenoid Valve SL3 Line Pressure
Control Solenoid Assy
Shift Solenoid Valve SL1Shift Solenoid Valve DSL
10.8 (110, 8)
6.6 (67, 58 in.Vlbf)
6.6 (67, 58 in.Vlbf)10.8 (110, 8)
10.8 (110, 8)
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)40-15
39 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

D03761
 Oil SealTransaxle Housing
PinDifferential Pinion Thrust Washer
Differential Side Gear Differential Pinion Shaft
Differential Side Gear
Thrust Washer
Differential Pinion
Differential Ring Gear
Differential Case
 Tapered Roller Bearing FR
Bearing Outer Race
 Oil Seal
Shim
Bearing Outer Race
N´m (kgf´cm, ft´lbf) : Specified torque
 Non-reusable part
Tapered Roller Bearing RR
95.1 (970, 70)x14 U151E: 40-16
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)
40 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

D03707
 Oil Seal
Bearing Race
Differential RH Case
Center Differential
Side Gear Thrust
Washer No.1
Conical Spring
Center Differential
Side Gear
Center Differential
Pinion Spider
Center Differential
Pinion Thrust Washer
Center Differential Pinion
x16
Differential
Intermediate
Case63 (642, 46)
x15
Front Differential
Side Gear Thrust
Washer
Front Differential
Side Gear
Front Differential
Case No.2Pin
Front Differential
Pinion Shaft
Front Differential
Pinion Thrust Washer
Pinion Shaft
Spacer Snap
Ring
Front Differential
Pinion Shaft
 Oil Seal
Front Differential
Side Gear Thrust
Washer
Center Differential
Side Gear Thrust
Washer No.2
Differential Ring Gear
Front Differential
Side GearConical
Spring
N´m (kgf´cm, ft´lbf) : Specified torque
 Non-reusable part
Differential
LH Case
Tapered Roller Bearing
Bearing RacePlate Washer
Front Differential
Pinion Front Differential
Pinion Shaft Holder
U151F:
95.1 (970, 70)
Tapered Roller
Bearing
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)40-17
41 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

D03918
SST
D08074
Lock Washer
C89123
C
BA
Input Sun Gear
D
40-50
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSAXLE ASSY (U151E/U151F)
74 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)
(e) Using SST and a torque wrench, measure the turning
torque of the bearing while rotating SST at 60 rpm. When
the measured value is not within the specified value,
gradually tighten the nut until it reaches the specified val-
ue.
SST 09387-00080
Turning torque at 60 rpm:
New Bearing
0.51 - 1.02 NVm (5.1 - 10.0 kgfVcm, 4.4 - 8.7 in.Vlbf)
Used Bearing
0.26 - 0.51 NVm (2.7 - 5.2 kgfVcm, 2.3 - 4.5 in.Vlbf)
HINT:
Use a torque wrench with a fulcrum length of 160 mm (6.3 in.).
(f) Tighten the nut gradually until the specified rotation
torque of tapered roller bearing is measured.
Torque: 350 NVm (3,569 kgfVcm, 258 ftVlbf) (a limit)
(g) Using a chisel and hammer, stake the front lock washer.
98. INSTALL INPUT SUN GEAR
(a) Coat the 2 thrust bearings with ATF.
(b) Install the 2 thrust bearings, the bearing race and the front
planetary sun gear to the front planetary gear assy.
NOTICE:

Install the bearing race on the side of the front plane-
tary carrier. Be careful about the orientation of the
race.

Installing thrust bearing and front sun gears, be care-
ful about the orientation of the parts.

Install the bearing race on the side of the front sun
gear. Be careful about the orientation of the race.

Install the thrust bearing and the race after holding
the parts on the rear planetary carrier by applying
grease. Be sure the assembling order.

D26766
SST
D26389
Rear Clutch
Oil Seal
Ring Outer
D26388
D26454
FIPG
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSAXLE ASSY (U151E/U151F)
40-57
81 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)
113. INSTALL NEEDLE ROLLER BEARING
(a) Using SST and a press, install the needle roller bearing
to the transaxle rear cover.
SST 09950-60010 (09951-00230, 09952-06010)
Press fit depth: 20.55 - 21.25 mm (0.8091 - 0.8366 in.)
NOTICE:

Face the inscribed mark side of the bearing race up.

Repeat the press fit until the specified value is ob-
tained.
(b) Coat a needle roller bearing with ATF.
114. INSTALL REAR CLUTCH OIL SEAL RING OUTER
(a) Coat the 3 new rear clutch oil seal rings with ATF, install
them to the transaxle rear cover.
NOTICE:
The snap ring should be fixed certainly in the groove of the
drum.
115. INSTALL TRANSAXLE CASE NO.1 PLUG
(a) Install the 4 new O-ring to the 4 transaxle case No. 1
plugs.
(b) Install the 4 transaxle case No. 1 plugs to the transaxle
rear cover.
Torque: 7.4 NVm (75 kgfVcm, 65 in.Vlbf)
116. INSTALL TRANSAXLE REAR COVER SUB-ASSY
(a) Remove any packing material and be careful not to get oil
on the contacting surfaces of the transaxle rear cover or
the transaxle case.
(b) Apply FIPG to the cover.
FIPG:
Part No. 08826-00090, THREE BOND 1281 or equiva-
lent.
NOTICE:
Concerning about the amount of the FIPG application, the
amount should be controlled to from even sealing film on
entire flange surface and have slight protrusion of the FIPG
all around of the connecting area. The FIPG shall be ap-
plied continuously on the flange. (Reference value of the
section diameter: f1.2)