2004 YAMAHA YZF-R1S Service Manual

2-29
ENGINE OIL LUBRICATION CHARTSPEC
ENGINE OIL LUBRICATION CHART
ProCarManuals.com

2-30
LUBRICATION DIAGRAMSSPEC
1Intake camshaft
2Exhaust camshaft
3Oil filter cartridge
4Oil level switch
EAS00034
LUBRICATION DIAGRAMS
ProCarManuals.com

2-31
1Intake camshaft
2Exhaust camshaft
3Crankshaft
4Oil cooler
5Oil pipe
6Oil strainer
7Oil pump
8Relief valve
LUBRICATION DIAGRAMSSPEC
ProCarManuals.com

2-32
1Oil cooler
2Oil filter cartridge
3Oil level switch
4Oil strainer
5Oil pump
6Oil pipe
LUBRICATION DIAGRAMSSPEC
ProCarManuals.com

2-33
1Main axle
2Oil delivery pipe
3Drive axle
LUBRICATION DIAGRAMSSPEC
ProCarManuals.com

2-34
1Cylinder head
2Crankshaft
LUBRICATION DIAGRAMSSPEC
ProCarManuals.com

2-35
CABLE ROUTINGSPEC
G Clamp the head light lead by
wrapping and insert it to the in-
take air grill hole. (only at the
right side.)
H Do not connect the wire to the
coupler with the plug for options.
I To the turn signal light
J To the wire harness
K Cut the tip of the clamp.A Insert to the rib of the head light.
(Either location of the right and
left relays is acceptable.)
B The lead should not stretch too
much.
C Make sure to insert the coupler
and boot to the stay 1 hole.
D The speedometer lead should
not be strained.
E To the stay 1 hole
F Connect after passing over the
upper side of the duct.1Ground lead
2Meter lead
3Stay 1
4Auxiliary light lead (right)
5Headlight lead
6Auxiliary light lead (left)
7Console panel 1
8Duct 1
9Console panel 2
10Duct 2
11Headlight lead (right)
12Headlight lead (left)
EAS00035
CABLE ROUTING
ProCarManuals.com

2-36
CABLE ROUTINGSPEC
L Clamp the head light lead to the
stay 1 at the positioning white
tape section. There should be no
slack when clamping. Point the
tip of the clamp (excessive part)
to the front side of the vehicle.
Fasten the head light lead with a
clamp.
M Feed a lead wire through the U
shape cutout of the console pan-
el.
ProCarManuals.com