3-2
NOTE:
GENERAL MAINTENANCE AND LUBRICATION CHART
CHK
ADJ
NOTE:
INITIALODOMETER READINGS
No.ITEMROUTINE600 mi
(1000 km)
or
1 month4000 mi
(7000 km)
or
6 months8000 mi
(13000 km)
or
12 months12000 mi
(19000 km)
or
18 months16000 mi
(25000 km)
or
24 months20000 mi
(31000 km)
or
30 months
9*Swingarm pivot
bearings
(See page 4-71)Check bearing assemblies for looseness.Moderately repack with lithium-soap-based
grease.Repack.
10Drive chain
(See page 3-49, 50)Check chain slack/alignment and condition.Adjust and lubricate chain with a special O-
ring chain lubricant thoroughly.Every 600 mi (800 km) and after washing the motorcycle or riding in the rain
11*Steering bearings
(See page 3-51)Check bearing assembly for looseness.Moderately repack with lithium-soap-based
grease every 16000 mi (25000 km) or 24
months.Repack.
12*Steering damper
(See page 4-60)Check operation and for oil leakage.
13*Chassis fasteners
(See page 2-23)Check all chassis fitting and fasteners.Correct if necessary.
14Brake and clutch
lever pivot shafts
(See page 3-61)Apply lithium-soap-based grease (all-purpose
grease) lightly.
15Sidestand pivot(See page 3-61)
Check operation.
Apply lithium-soap-based grease (all-pur-
pose grease) lightly.
16*Sidestand switch
(See page 3-61, 8-4)Check operation and replace if necessary.
17*Front fork
(See page 3-53)Check operation and for oil leakage.Replace if necessary.
18*Shock absorber
assembly
(See page 3-56, 4-67)Check operation and for oil leakage.Replace if necessary.
19*Rear suspension
link pivots
(See page 4-71)Check operation.Correct if necessary.
20Engine oil
(See page 3-26, 28)Change (warm engine before draining.)
21*Engine oil filter cartridge
(See page 3-28)Replace.
22*Cooling system
Check hoses for cracks or damage.Replace if necessary.
22*Cooling system(See page 3-37, 38, 39)Change with ethylene glycol antifreeze cool-
ant every 24 months.Change.
23*EXUP system
(See page 3-36)Check operation, cable free play and pulley
position.Every 12000 mi (19000 km)
24*Control cables
(See page 3-61)Apply Yamaha chain and cable lube or en-
gine oil SAE 10W-30 thoroughly.
25*Throttle grip housing
and cable
(See page 3-22)Check operation and free play.Adjust the throttle cable free play if necessary.Lubricate the throttle grip housing and cable.
* Since these items require special tools, data and technical skills, have a Yamaha dealer perform the service.
From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi
(13000 km) or 12 months.
Air filter
This model’s air filter is equipped with a disposable oil-coated paper element, which must not be
cleaned with compressed air to avoid damaging it.
The air filter element needs to be replaced more frequently when riding in unusually wet or dusty areas.
Hydraulic brake service
After disassembling the brake master cylinders and calipers, always change the fluid. Regularly
check the brake fluid levels and fill the reservoirs as required.
Every two years replace the internal components of the brake master cylinders and calipers, and
change the brake fluid.
Replace the brake hoses every four years and if cracked or damaged.
ProCarManuals.com
