2004 YAMAHA YZF-R1S Service Manual

6-1
Order Job / Part Q’ty Remarks
1
2
3
4
5Removing the radiator
Rider seat
Fuel tank
Air filter case
Side cowlings
Bottom cowling
Coolant
Fuse box stay
Coolant reservoir hose
Radiator
Radiator fan motor
Radiator inlet hose1
1
1
2
1Remove the parts in the order listed.
Refer to “AIR FILTER CASE” in chapter 3.
Drain.
Refer to “CHANGING THE COOLANT” in
chapter 3.
Disconnect.
Refer to “COWLINGS” in chapter 3.
Refer to “SEATS” in chapter 3.
10 Nm (1.0 m
kg, 7.2 ft
lb)
10 Nm (1.0 m
kg, 7.2 ft
lb)
5 Nm (0.5 m
kg, 3.6 ft
lb)
10 Nm (1.0 m
kg, 7.2 ft
lb)
RADIATORCOOL
EAS00454
COOLING SYSTEM
RADIATOR
ProCarManuals.com

6-2
6
RADIATORCOOL
Order Job / Part Q’ty Remarks
6
7
8
9
10
11Radiator inlet pipe
Oil cooler outlet hose
Water pump breather hose
Radiator outlet hose
Water pump inlet pipe
O-ring1
1
1
1
1
1
For installation, reverse the removal
procedure.
10 Nm (1.0 m
kg, 7.2 ft
lb)
10 Nm (1.0 m
kg, 7.2 ft
lb)
5 Nm (0.5 m
kg, 3.6 ft
lb)
10 Nm (1.0 m
kg, 7.2 ft
lb)
ProCarManuals.com

6-3
RADIATORCOOL
NOTE:
EAS00455
CHECKING THE RADIATOR
1. Check:

radiator fins
Obstruction
Clean.
Apply compressed air to the rear of the radia-
tor.
Damage
Repair or replace.
Straighten any flattened fins with a thin, flat-
head screwdriver.
2. Check:

radiator hoses

radiator pipes
Cracks / damage
Replace.
3. Measure:

radiator cap opening pressure
Below the specified pressure
Replace the
radiator cap.
Radiator cap opening pressure
108
137 kPa
(1.08
1.37 kg / cm
2,
1.0
1.3 bar, 15.6
19.9 psi)
a. Install the radiator cap tester
1 and radiator
cap tester adapter
2 to the radiator cap 3.
Radiator cap tester
90890-01325, YU-24460-01
Radiator cap tester adapter
90890-01352, YU-33984
b. Apply the specified pressure for ten seconds
and make sure there is no drop in pressure.
4. Check:

radiator fan
Damage
Replace.
Malfunction
Check and repair.
Refer to “COOLING SYSTEM” in chapter 8.
ProCarManuals.com

6-4
RADIATORCOOL
EAS00456
INSTALLING THE RADIATOR
1. Fill:

cooling system
(with the specified amount of the recom-
mended coolant)
Refer to “CHANGING THE COOLANT” in
chapter 3.
2. Check:

cooling system
Leaks
Repair or replace any faulty part.
3. Measure:

radiator cap opening pressure
Below the specified pressure
Replace the
radiator cap.
Refer to “CHECKING THE RADIATOR”.
ProCarManuals.com

6-5
Order Job / Part Q’ty Remarks
1
2
3
4
5
6
7
8
9Removing the oil cooler
Engine oil
Oil cooler inlet hose
Bolt
Washer
Oil cooler
O-ring
Water pump outlet pipe
O-ring
Water jacket joint inlet hose
O-ring1
1
1
1
1
1
1
1
1Remove the parts in the order listed.
Drain.
Refer to “CHANGING THE ENGINE OIL”
in chapter 3.
10 Nm (1.0 m
kg, 7.2 ft
lb)
10 Nm (1.0 m
kg, 7.2 ft
lb)
63 Nm (6.3 m
kg, 46 ft
lb)
OIL COOLERCOOL
EAS00457
OIL COOLER
ProCarManuals.com

6-6
OIL COOLERCOOL
Order Job / Part Q’ty Remarks
10
11
12Water jacket joint
Stay
O-ring1
1
1
For installation, reverse the removal
procedure.
10 Nm (1.0 m
kg, 7.2 ft
lb)
10 Nm (1.0 m
kg, 7.2 ft
lb)
63 Nm (6.3 m
kg, 46 ft
lb)
ProCarManuals.com

6-7
OIL COOLERCOOL
63 Nm (6.3 m
kg, 46 ft
lb)
NOTE:
EAS00458
CHECKING THE OIL COOLER
1. Check:

oil cooler
Cracks / damage
Replace.
2. Check:

oil cooler inlet hose

oil cooler outlet hose
Cracks / damage / wear
Replace.
EAS00459
INSTALLING THE OIL COOLER
1. Clean:

mating surfaces of the oil cooler and the
crankcase
(with a cloth dampened with lacquer thinner)
2. Install:

O-ring
New

oil cooler
1

washer 2 New

bolt
3

Before installing the oil cooler, lubricate the oil
cooler bolt and O-ring with a thin coat of engine
oil.

Make sure that the O-ring is positioned proper-
ly.

Align the projection
a on the oil cooler with the
slot
b in the crankcase.
3. Fill:

cooling system
(with the specified amount of the recom-
mended coolant)
Refer to “CHANGING THE COOLANT” in
chapter 3.

crankcase
(with the specified amount of the recom-
mended engine oil)
Refer to “CHANGING THE ENGINE OIL” in
chapter 3.
4. Check:

cooling system
Leaks
Repair or replace any faulty part.
5. Measure:

radiator cap opening pressure
Below the specified pressure
Replace the
radiator cap.
Refer to “CHECKING THE RADIATOR”.
ProCarManuals.com

6-8
Order Job / Part Q’ty Remarks
1
2
3
4
5Removing the thermostat assembly
Rider seat
Fuel tank
Air filter case
Coolant
Thermostat assembly outlet hose
Thermostat assembly breather hose
Thermostat assembly
Thermostat assembly inlet hose
Band1
1
1
1
2Remove the parts in the order listed.
Refer to “SEATS” in chapter 3.
Refer to “FUEL TANK” in chapter 3.
Refer to “AIR FILTER CASE” in chapter 3.
Drain.
Refer to “CHANGING THE COOLANT” in
chapter3.
For installation, reverse the removal
procedure.
THERMOSTATCOOL
EAS00460
THERMOSTAT
ProCarManuals.com