2004 MITSUBISHI ENDEAVOR Amplifier spec

Fig. 46: Identifying Connector C
-303 C
-311

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Q: Are the wiring harness between remote controlled radio switch
connector C-311 (terminals 1 and 2) and clock spring connector C-303
(terminals 4 and 5) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. The remote controlled radio switch (LH)
should work normally.
INSPECTION PROCEDURE 5: No Sound. < Vehicles with Audio Amplifier >.
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor

TROUBLESHOOTING HINTS
Damaged wiring harness or connector Malfunction of the audio amplifier
DIAGNOSIS Required Special Tool:
MB991223: Harness set
STEP 1. Measure the voltage at audio amplifier connector C-11 in order to
check the battery circuit of power supply system to the audio amplifier.
1. Disconnect audio amplifier connector C-11, and measure at the wiring
harness side.

2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
.
Q: Do the speakers sound normally?
YES: The procedure is complete.
NO: Repair or replace the audio amplifier.
INSPECTION PROCEDURE 6: No Sound from One Speaker. < Vehicles with Six Speakers >.
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor

Fig. 135: Identifying Connector C
-112

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Q: Is the wiring harness between woofer connector D-08 (terminals 1 and
2) and audio amplifier connector C-11 (terminals 8 and 18) in good
condition?
YES: Replace the audio amplifier. The woofer should sound.
NO: Repair the wiring harness. The woofer should sound.
INSPECTION PROCEDURE 8: Noise is Present while Moving (AM). DIAGNOSIS
STEP 1. Ask the driver about the noise.
1. Find out the following information from the owner.
2. Place where the noise occurs.

2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor