WINDOWS
54
54 - 1
WINDSCREEN AND HATCHBACK GLASS REPLACEMENT
The replacement of t hese glasses is performed in case they a re broken, when they are not
according to the required overall dimensions or when they have manufacturing defects (image
distortions, cracks, etc).
PREPARING FOR MOUNTINGPosition the gasket (2) around the glass (1)
and place the assembly on a protection plate.
Place in the gasket channel all around the
gasket frame; a cotton cord ( 4 ) of 3 – 4
mm diameter, l eaving at its fre e ends (3)
about 20 cm of cord, and between the ends,
the distance shall not be more than 10 cm.
MOUNTING OF THE WINDSCREEN
M ount on the carriage body, the windscreen – cord - glass gasket assembly, so that the cord
ends are placed towards the inside of carriage body.
From the inside of the vehicle, successively draw each end of the cord, the drawing direction
being parallel with the glass surface, towards the surface inner part, perpendicular on the frame,
beginning with the lower part, in this way the gasket edge is lifted and then lowered on the frame.
At the outside, the gasket is seated by slightly and successively pressing it on glass, so that the
tightening is uniform on the whole windscreen contour and frame. DISMOUNTING OF A BROKEN
GLASS
If the glass or part of i t did not fa ll, t he
dismounting and the cleaning of the window
gaskets by the pieces of the broken glass
will be easier to be made by sticking a sheet
of paper on each surface.
WINDSCREEN AND HATCHBACK GLASS
vnx.su
