2004 DACIA SUPERNOVA remove seats

36
STEERING ASSEMBLY
36 - 5
NOISE ABSORBER BEARING
DISMOUNTING
Loosen the screws of the wheel;
Lift the front part of the vehicle
Dismount the wheel on the opposite side of the steering column;
Dismou nt :
-casing protection bellows;
-the steering auxiliary connected rod.
Rotate the steering wheel until the rack is withdrawn.
Remove, by means of a screwdriver the noise absorber bearing.
REMOUNTING
Carefully clean t he rack and the noise absorber bearing seat and grease with special grease
containing MoS2.
In the same way as at the dismounting, place back the noise absorber bearing paying attention
to fix the three pins (A) in their seats.
Rotate the steering wheel in the opposite direction until the rack stands out the bearing.
Remount on the rack: - the steering auxiliary connecting rod (mount a new safety washer);
- protection bellows.
Check and adjust the parallelism, if necessary.
vnx.su

SAFETY ELEMENTS
59REAR SAFETY BELTS
DISMOUNTING
F old the seats (5) and (6) and remove them from supports.
Dismount the protecto rs (1) of the attachment rear safety belt screws (2) on the rear side panels.
Dismount the attachment screws (3 ) on the lining lateral frame.
Dismount the attachment screws (4) of the rear belts lock on central floor
REMOUNTING
Perform the dismounting operations in the reverse order.
The safety belts attachment screws are to be tighten at a moment of 2.7 daNm.
1
2
43
56
59 - 2
vnx.su

75
FRONT SEATS FRAMES AND R UNNERS
75-1
CO
NTROL/ADJUSTMENT
The front seats, equipping DACIA NOVA vehicles, have two possibilities of adjustment:
- front or rear longitudinal movement ,which can be performed by lever’s operation (1);
- seat back overturning up to the horizontal position, by rotating the round button (2).
DISMOUNTING
For dismounting, the seat will be placed in the middle position by lever’s (1) lifting and per-
form the following operation s:
Remove the lateral cross bar protector (3) by dismounting the metal screws (4 ) .
Dismount screws (5), which are fixing the seat on the central and lateral cross bar.
Release the front seat.
REMOUNTING
Perform in the reverse order the dismounting operations.
41
2
3
FRONT SEATS
vnx.su

75
FRONT SEATS FRAMES AND R UNNERS
FRONT SEAT ARMATURE
DISMOUNTING
Dismount the front seat off the vehicle.
Dismount slides guides from the seat.
Remove the upholstery.
Detach the quilt from the seat armature.
Release t he front seat armature.
REMOUNTING
Perform in the reverse order the dismounting
operations.
1
75-3
vnx.su

76
REAR SEATS FRAMES AND RU NNERS
76-1
The rear bench is composed of two separated swinging seats, unequal and two separated,
unequal, swinging back rests.
DISMOUNTING
Di smount the seats, by swinging and by removing them from the welded supports on the
carriage body.
For the back rests dismounting perform the following operations: - lift the unlocking buttons (1), and swing out the back rests a head.
- dismount the four screws for the attachment of hinges on the wheels’ passage.
- remove the back rests from the central hinge
REMOUNTING
Perform in the reverse order the dismounting operations.
REAR BENCH
vnx.su

76
REAR SEATS FRAMES AND RU NNERS
76-2
DISMOUNTING
Dismount the bench seats and remove the upholstery from the seats quilts
(3 ) and (4).
Di smount the bench’s backs rests and remove t he upholstery from the back rests quilts (1)
and (2).
Release the reinforced quilts of the bench.
REMOUNTING
Perform in the reverse order the dismounting operations.
BENCH SEATS
vnx.su

77
FRONT SEAT TRIM
77-1
Detach the rods
(3) from the attachment clips (4) of the seats upholstery (7) on the quilt (14).
Detach the rods (6) from the attachment clips (5) of the seats upholstery with front seat
reinforcement. Remove the front seat upholstery from the seat quilt.
REMOUNTING
Perform in the reverse order the dismounting operations.
S
EATS UPHOLSTERY DISMOUNTING
1
2 10 11
8
5
6
4 12 13
7
3
14
9
vnx.su

78
REAR SEAT TRIM
78-1
Remove by swinging
the seats (1 ) and (4).
D etach the attachment rods (16) and (11) of the seats upholstery (14 ) and (13) on the quilts
(8) and (7). Detach the a ttachment rods (15) and (12) of the seats on t he corresponding qui lts a nd re-
move the upholsters ( 14) and (13) from the seat quilts.
Remove the front seat upholstery from the seat quilt.
REMOUNTING
Perform in the reverse order the dismounting operations.
BACK REST UPHOSTERY DISMOUNTING
Dismount the backrest seats (2) and (3) from the central and lateral attachment screws.
Detach the rods (19) and (20) of the attachment back rests (2) and (3) of backrest upholstery
(8) and (9), the quilts (5), consequently (6).
D etach the rods ( 17) and (10) of the back rests upholstery on the corresponding quilts and
remove the upholstery (8) and (9) from the back rests quilts.
REMOUNTING
Perform in the reverse order the dismounting operations.
S
EAT UPHOLSTERY DISMOUNTING
1
2 10 11
8
5
6
4 12 13
7
3
14
9
vnx.su