86
86 - 7
AUTO RA DIO
CD P LAYER
CD (compact disc) playing.
Insert the CD, with the recorded face downward, in the door located on the device front part.
The CD lecture is beginning with track number 1.
If the CD has been previously inserted, then you switch on listening to a radio station, in case
you wish to listen again to the CD, push key SRC and select CD. The CD playing will continue
from its last stop.
After listening the last CD track, the playing is continuing beginning with track no.1.
Observations:
- The CD playing may be interrupted by the receipted information if radio has been previously
programmed to operate” Emergency messages reception”.
- If you after inserting the CD, you hear an acoustic signal (bip), check if the CD is not dirty
or damaged.
Track selection
In order t o select the de sired t rack, push consequently > or < till you reach the searched
track. The CD lecture will continue from the selected track.
Fast forwards/back wards
Push key > or < and maintain it pushed, performing in this way, the forwards and consequently
backwards of the track listen in that moment.
CD tracks random playing
In order to activate this function, push ke y ( 1). After finishing random playing of all CD
tracks, the lecture will c ontinue until its stop controlling. If key > is pushed, passing to the next
track, random selected, will be performed. If key < is pushed, playing again of the existent track
will be performed. In order to return to the normal track playing ( successive playing), key (1) i s
to be pushed and to be maintained for few seconds.
CD eject.
After CD playing, if CD ejection is desired, push key (2) EJECT, placed on the left side of
the device front panel.
OBSERVATIONS:
This CD player is reading only CD audio parts. If on CD there are also non-audio parts, they
can not be red and on the display the track number followed by the message NO AUDIO will be
displayed.
If a CD without a ny audio t rack, i s inserted in CD player, this one will be refused and the
message NO AUDIO will be displayed on the screen.
This CD player is operating only with 12-cm diameter CD.
CD Player
vnx.su
87
ELECTRICAL ASSISANCE EQUIPEMENT
87 - 3
REPLACEMENT OF COCKPIT INTERMEDIARY RELAY
DISMOUNTING
Disconnect the battery (-) terminal.
Dismount the relays assembly and UCE decoder.
Remove the relay: flash (6), timer (7 ), signaling (8) or speed limit warning ( 9) from their
connectors. Mark the identification of the relays mounting position.
REMOU NT I NG
Reconnect the relays observing the mounting position prior to dismountin g.
Remount the assembly relays and UCE decoder.
Reconnect the battery (-) terminal.
Pe rform functional tests, noticing the correct operation of all consumers supplied by means of the
cockpit relays asse mbly and UCE decoder.
OBSERVATION :
A fter battery reconnecting, re- program the clock, and for vehicles equipped with
p rogrammable radio tape player, re-introduce the radio code.
Relays and UCE decoder assembly from cockpit
vnx.su
89
ELECTRIC DIAGRAMS
89 - 3
MA = motorization in agreement with the EURO 96 (EURO II) de-pollution norm
MB = motorization according to the EURO 2000 (EURO III) de-pollution norm
PROJAB = fog projectors
RAD01 = Fr ont loud speaker radio-cassette player
RAD02 = Rear loud speaker radio-cassette player
RAD03 = Fr ont and rear loud speaker ra dio-CD player
TLAIF1 = Countries group definition (SASO norms)
2. The electric connectors ( 5), couplings (13) and wires (18) are symbolised by the following
colours:
BA = white JA = yellow SA = pink- salmon
BE = blue MA = brown VE = green
BJ = beige NO = black VI = violet
CY = white-crystal OR = orange
GR = grey RG = red
General
vnx.su
89
ELECTRIC DIAGRAMS
89 - 3
MA = motorization observing the de-pollution norm EURO 96 (EURO II)
MB = motorization observing the de-pollution norm EURO 2000 (EURO III)
PROJAB = fog projectors
RAD01 = Fr ont speaker radio-cassette player
RAD02 = Rear and front speaker ra dio-cassette pl ayer
RAD03 = Fr ont and rear speaker radio-CD player
2. The electric connectors ( 5), couplings (13) and wires (18) are symbolised by the
following colours:
BA = white JA = yellow SA = pink- salmon
BE = blue MA = brown VE = green
BJ = beige NO = black VI = violet
CY = white-crystal OR = orange
GR = grey RG = red
General
Cooling motor fan
vnx.su
