2004 DACIA SOLENZA fog light bulb

BATTERY - FRONT HEADLIGHTS
80
80 - 6
Bulbs
FOG PROJEC TOR B ULB RE PLACEMENT
DISMOUNTING
Suspend the vehicle on an elevator.
Disconnect the fog projector connector
Rotate the bulb holder ( F) an d extract it from its place.
REMOU NT I NG
Perform the dismounting operations in the reverse order, correctly positioning the bulb holder in
its place. Perform fog projector adjustment
NOTE :
Because the fog projector is equipped with a halogen bulb, do not touch the bulb glass
ba lloon directly by hand.
HEADLAMP BULB REPLACEMENT
DISMOUNTIN G
Disconnect the connector (2 ).
Remove the rubber protector ( 7). Mark its mounting position.
Release the atta chment clamp (8) and remove th e h e adlamp bulb
REMOU NT I NG
Perform the dismounting operations in the reverse order. Position correctly the rubber protector
( 7) observing the mounting position before dismounting. Perform headlamp adjustment.
NOTE :
Because the headlamp is equipped with a halogen bulb, do not touch the bulb glass balloon
d irectly by hand.
72 3 4
8
5
10
10
vnx.su

BATTERY - FRONT HEADLIGHTS
80
80 - 8
HEADLAMP-FRONT LAMP ASSEMBLY SEALING
(getting fogged, it has condensation water or water penetration)
The condensation water is not affecting the lighting quality.
No No
No
No
No Ye s
Ye s
Ye s Ye s
Bulbs
Check the front part of the assembly: direct
a water jet towards the headlamp glass.
Is the water penetrating inside the headlamp?
Is wa ter penetrating inside the parking-turning
lamp?
Visually check the headlamp rear part; rubber
protecto r of the headlamp bulb is correctly
mounted?
The he adlamp adju stment corrector is well
mounted?
The headla mp bulb is correctly mounted?
The aera tion holes are clogged?
The hea dl amp is steamed out or it has
condensa tion water inside?
Visually check the rear part of the parking-
turning lamp; t he parking bulb holder is
correc tly mounted?
Th e turning bulb holder is correctly mounted?
Replace the headlamp.
Replace the parking-turning lamp.
Mount corr ectly the rubber protector of the
h eadlamp bu lb. If this is not good, replace it.
Mount corr ectly the headlamp adjustment
co rrector and its rubber protector. If protector
is not good, replace it.
Mount correc tly the headlamp bulb.
If possible, eliminate the clogging cause. If
no t possible, replace the headlamp.
Explain th e client that this fact is a natural
one, no t a damage and there is no headlamp
corro sion risk. The condensation water will
disappear when the headlamp will be lighted;
the disappearing time of the condensation
wat er is subject to the environmental
humidity .
Mount co rrectly the parking bulb holder. If
its gasket is not good, replace it.
Mount co rrectly the turning bulb holder. If
its gasket is not good, replace it.
REMARK : If the client is i nsisting, proceed to headlamp drying:
- blow with dry air, if possible;
- naturally dry the headlamp by turning on the headlamps for couple of minutes
till condensation water elimination or headlamp defoggi ng. No
No
No
No Ye s
Ye s
Ye s
Ye s
vnx.su

81
INSIDE AND REAR LIGHTING
81 - 1
REAR LAMPS
RE AR LAMP REPLACEMENT
DISMOUNTIN G
Disconnect the battery (-) plug.
Disconnect the rear lamp connector .
Inside trunk, dismount the screw with triangle head ( A).
Extract the rear lamp towards outside.
R EMOU NT I NG
Perform the dismounting operations in the reverse order, positioning correctly the rear lamp in
its seat. Check the bulbs connections and operation.
Rear right lamp Rear left lamp
Rear right lamp connector Rear left lamp connector
Pin Denomination Pin Denomination
1+ Right stop lamp 1 Fog parking lamp supply
2+ Right parking lamp 2 Left turning lamp supply
3Free 3 Free
4 Mass 4 Mass
5 Right turning lamp supply 5 + Left stop lamp
6 Revere driving lamp supply 6 + Left parking lamp
Inside and rear lighting
A
6
1 B
B
B
B 6
1
vnx.su

INSIDE AND REAR LIGHTING
81
81 - 2
R
EPLACEMENT OF REAR TURNING,
P ARK ING, FOG, REVERSE DRIVING,
STOP BULB
DISMOUNTIN G
Disconnect the battery (-) terminal.
Disconnect the rear lamp connector
Dismount the screw with triangle head
Extract the rear lamp towards outside
Di smount the two attachment screws (B) of
the bulbs support on the lamp glass.
Dismount the worn bulb.
REMOU NT I NG
Perform the dismounting opera tions i n the
reverse order, checking the condition of the
s ealing ga sket between the lamp glass and the
bulbs support: if this one is not good, replace it.
Check the bulbs operation and connections.
REPLACEMENT OF LICENSE PLATE LAMP BULB
DISMOUNTIN G
Disconnect the battery (-) terminal.
Disconnect the license plate lamp connector.
Extract the license plate lamp holder.
Remove the worn bulb and replace it.
R EMOU NT I NG
Perform the dismounting opera tions i n the
reverse order. Check the bulb operation.
REPLACEMENT OF ADDITIONAL
STOP LAMP BULB
DISMOUNTIN G
Disconnect the battery (-) terminal.
Dismount the TORX 20 attachment screw
of the additional stop lamp. Mark the mounting
position of the lamp mass wire connector.
Inside and rear lighting
Disconnec t t he addit ional st op l amp
connector. Detach t he two side clips and extra ct the
reflector-glass assembly from the lamp body.
Detach carefully from clips the lamp glass,
by means of a straight screwdriver. Replace the worn bulb.
REMOU NT I NG
Perform the dismounting operations in the
reverse order. Check the bulb connections and
operation.
REPLACEMENT OF LICENSE PLATE LAMP
DISMOUNTIN G
Disconnect the battery (-) terminal.
Disco nnect the license plate lamp
connector. Detach from clips the license plate lamp.
REMOUNTING
Pe rform t he di smounting opera tions i n t he
reverse order. Check the bulb operation.
R EPLACEMENT OF ADDITIONAL
STOP LAMP
DISMOUNTIN G
Disconnect the battery (-) terminal.
Dismount the attachment screw TORX 20
of the additional stop lamp. Mark the mounting
position of the lamp mass wire connector.
Disconnec t t he addit ional st op l amp
connector.
R EMOU NT I NG
Perform the dismounting operations in the
reverse order. Check the bulb connections and operation.
vnx.su

81
INSIDE AND REAR LIGHTING
81 - 5
Bulbs
BULBS
Headlamps High/low beam lights Bulb H4, 12V-60/55W Parking lights Bulb W5W, 12 V-5W
Front turning lamp Bulb PY21W, 12V-21W (colored)
F og projectors Halogen bulb H11, 12V-55W
Rear Parking, stop lights Bulb AB1, 12V-21/5W
lamps Turning lights Bulb PY21W, 12V-21W Rear fog lamp and reverse driving Bulb P21W 12V/21W
Rear side signalin g lamps Bulb WY5W 12V-5W
Ceiling lamp Bulb C5W, 12V-5W
License plate lamp Bulb W 5W, 12V-5W
Additional STOP lamp Bulb C21W, 12V/21W Sv8,5
Instrument panel Bulb12V, 2W (brown holder)
Bulb 12V, 1,2W (black holder)
Climate control panel Bulb 12V, 1,2 W
(black holder
vnx.su