2004 DACIA SOLENZA power

CHARACTERISTICS
Engine – Clutch - Gearbox .................................. 01-1
Ve hicle identification .......................................... 01-2
LIFTING MEANS
M obile jack – Adjustable supports ..................... 02-1
Elevator positioned under vehic le body .............. 02-2
TOWING
All types .............................................................. 03-1
LUBRICANTS – INGREDIENTS
C ondition ............................................................ 04-1
DRAINING – FILLING
Engine.................................................................. 05-1
Gearbox .............................................................. 05-2
P ower steering ..................................................... 05-3
VALUES AND ADJUSTMENTS
Dimensions .......................................................... 07-1
Weights (kg) ........................................................ 07-2
C apacity - Quality ................................................ 07-3
Accessories belts tension ..................................... 07-4
Wheels, Tires ....................................................... 07-5
Br akes.................................................................. 07-6
Dimensions under carriage body ......................... 07-7
Checking values of the front axle angles .............. 07-8
Checking values of the rear axle angle s .............. 07-9
ENGINE ASSEMBLY
Ingredie nts............................................................ 10-1
Oil consumption ................................................. 10-2
Oil pressur e ......................................................... 10-3
Power tr ain group................................................. 10-4
Sepa ration - Gearbox .......................................... 10-9
Se para tion – Unfitting ......................................... 10-10
Tightening moments ........................................... 10-11
S pecial tools ......................................................... 10-12
C haracteristics ..................................................... 10-13
Dismounting – Remounting ................................. 10-20
Lower casing ...................................................... 10-39
Oil pump .............................................................. 10-41
Mul ti-purpose support ......................................... 10-42
DISTR IBUTIO N SYSTEM
Dis t rib ution belt ........................................................ 11-1
Cy l inder head gasket ............................................... 11-3 FUEL MIX TURE
Characteri stics .......................................................... 1 2 -1
Bo d y valve ................................................................. 1 2 -4
In let man ifo ld ........................................................... 1 2 -5
Exh aust man i fold ...................................................... 1 2 -6
Air fi l ter .................................................................... 1 2 -7 FUEL SUPPLY
Su p ply interruptio n .................................................. 1 3 -1
Fu el ramp .................................................................. 1 3 -2
Pu mp capaci ty ........................................................... 1 3 -3
Su p ply pressure ......................................................... 1 3 -4 ANTI-POLLUTIO N
Pet rol vapors re-as p irat ion ...................................... 1 4 -1
Oil vapors re-as p irat ion ............................................ 1 4 -4 ALTERNATOR – STARTER
Alternat or ................................................................. 1 6 -1
Starter ........................................................................ 1 6 -6 IGNIT ION AND INJECTION
Ig nition system ......................................................... 1 7 -1
Sp ark pl ags ............................................................... 1 7 -3
In ject ion system ....................................................... 1 7 -4
Characteri stics .......................................................... 1 7 -10
In ject ion / ai r co nditioning strat egy ......................... 1 7 -11
Id ling reg ime co rrection ........................................... 1 7 -12
Id ling reg ime ad aptive co rrection ............................ 1 7 -13
Enri ching ad justment ............................................... 1 7 -14
Enri ching ad aptive co rrection .................................. 1 7 -16
“On Board Diagnostic” system ch aracterist ics ....... 1 7 -18
“On Board Diag nostic” li ghting conditions ............. 1 7 -19
“On Board Diag nostic” di agnostic conditions ......... 1 7 -20
Diag nostic of co mbustion mis fires det ection ............ 1 7 -21
Cat alyst diag nostic .................................................... 1 7 -22
Oxy gen sensor diag nostic ......................................... 1 7 -23
Diag nostic – Gen eral ................................................. 1 7 -25
Diag nostic – Fai l ures interp retat ion ......................... 1 7 -26
Diag nostic – Hel p ...................................................... 1 7 -60
Diag nostic – Confo rmity ch ecking ............................ 1 7 -61
Diag nostic – Stat es interpret ation ............................ 1 7 -69
Diag nostic – Paramet ers interp retat ion .................. 1 7 -75
Fai l ure locat ing al gorithm ........................................ 1 7 -83 COOLING - EXHAUST - TANK
Characteri stics .......................................................... 1 9 -1
Fi l ling - Purging ........................................................ 1 9 -2
Checking ................................................................... 1 9 -3
Co o ling system diagram ........................................... 1 9 -4
Rad i ato r ..................................................................... 1 9 -5
Co o ling engine fan fo r vehicles
wit h out ai r co nditioning ............................................ 1 9 -7
Diag nostic – fai lures in terp retat ion at vehicles
wit hout ai r co nditioning ............................................. 1 9 -8
Co o ling engine fan fo r vehicles
General poinds vehicle0
01
02
03
04
05
07
Engine and péripheriques1
10
11
12
13
14
16
17
19
vnx.su

wit h ai r co nditioning ..................................... .............. 1 9 -9
Diag nostic – fai l ures interp retat ion
at vehicles wit h ai r co nditioning ............................... 1 9 -10
Wat er pump ............................................................... 1 9 -11
Exhau st Assemb ly...................................................... 1 9 -13
Fu el tan k .................................................................... 1 9 -15
Fu el pump ................................................................. 1 9 -22
Fu el filter ................................................................... 1 9 -24
Eng ine susp ension ..................................................... 1 9 -25
CLUTCH
Identifi cation ............................................................. 2 0 -1
Diag nostic .................................................................. 2 0 -2
Cl u tch di sk – Mechan ism ......................................... 2 0 -5
Pres s ure bearing – Clutch rel eas ing fo rk ................ 2 0 -7
Engine flywheel ................................................. 20-8 MECHANICAL GEARBOX
Se ctional view .................................................... 21-1
Identification ...................................................... 21-2
Tightening moments in daNm .......................... 21-3
Parti curarities .................................................... 21-4
Ratios ...... ............................................................ 21-5
Ingredie nts .......................................................... 21-6
C apacity, lubricants .......................................... 21-7
Parts t hat are replaced afte r
each dismonting ................................................. 21-8
Necessary special tools ...................................... 21-9
Gearbox dismounting ........................................ 21-10
R eplacement of the planetary se aling
gasket (on the vehicle) ....................................... 21-30
R eplacement of the 5-th gear synchroniser
and pinion (on the vehicle) .................................. 21-32
TRANSMISSION
Fr ont transversa l transmission ........................ 29-1
Bell ows - Bearing asse mbly to
the gearbox (left) ............................................... 29-4
Bell ows to wheel (left) ....................................... 29-7
Be llows to gearbox (right) ................................. 29-12
Bell ows to wheel (right) .................................... 29-15
GENERAL
General principle sc hedule
of the brake circuit ............................................ 30-1
Tightening moments (in daNm) ....................... 30-2
Com position and dimensions
of the ma in braking system elements ............... 30-6
Br aking system diagnostic ................................ 30-7
Br ake connections and ducts ............................ 30-12
Br ake fluid ......................................................... 30-13
Br aking system purging .................................... 30-14
The influe nce of angles ...................................... 30-16
Angles checking princ iple ................................. 30-17
Fr ont axles checking and adjustment ............. 30-18 FR
ONT AXLES ELEMEN TS
C haracteristics ..................................................... 31-1
Sus pension arm ................................................. 31-2
Elastic bushings of the suspension arm ........... 31-5
Sus pension ball joint .......................................... 31-6
Br ake lining (pads) ............................................ 31-7
Checking the brake pads wear ......................... 31-9
Br ake caliper ...................................................... 31-10
Br ake disk ........................................................... 31-12
St eering knuckle ................................................. 31-13
St eering knuckle bearing (35 x 65 x 35) ......... 31-15
Fr ont suspension ................................................ 31-16
Shock absor ber, Spring ...................................... 31-17
Sp ring – shock absorber assembly ................... 31-18
Anti roll bar ........................................................ 31-20
Power tr ain support .......................................... 31-21
REAR AXLES ELEMENTS
C haracteristics ................................................... 33-1
Re ar axle ............................................................. 33-2
Re ar suspension ................................................. 33-4
Shock absor ber ................................................... 33-5
Spring ...... ........................................................... 33-6
Br ake drum ........................................................ 33-7
Br ake cylinder .................................................... 33-8
Br ake shoes ......................................................... 33-10
Be aring ................................................................ 33-13
WHEELS AND TIRES
C haracteristics ................................................... 35-1
Wheels balancing ............................................... 35-4
STEERING ASSEMBLY
St eering connecting rods .................................. 36-1
Manual steering box .......................................... 36-3
St eering box pushe r ........................................... 36-4
Noise absorbant bushing .................................. 36-5
Bell ows ................................................................ 36-6
General .............................................................. 36-7
Power steering box ............................................ 36-8
P ower steering box pusher ............................... 36-11
Power steering pump ......................................... 36-12
Ste ering column ................................................. 36-14
THE MECHANICAL ELEMEN TS CONTROLS
Br ake pump........................................................ 37-1
S ervobrake ......................................................... 37-3
Air filter – se rvobrake reta iner valve .............. 37-6
Handbrake - adjustment ................................... 37-7
Handbrake control lever ................................... 37-8
Handbrake secondary cables ............................ 37-10
Br ake flexible hoses ........................................... 37-11
Br ake pressure controller .................................. 37-13
Gears control ..................................................... 37-15
Cl utch and brake pedals ................................... 37-17
Clutch cable ........................................................ 37-18
Pe dals support ................................................... 37-20
Acceleration control .......................................... 37-21
20
21
29
30
31
33
35
36
37
Transmission2
Chasis3
vnx.su

01 - 3
01
CHARACTERISTICS Ve hicle identification
VIN IDENTIFICATION NUMBER
5 A 7 1 5 3 * * * * * * *
POSITION CHARACTERS EXPLANATION
1 - 3 – manufacturer world identification,
UU1 – AUTOMOBILE DACIA SA. ROMANIA,
4 – vehicle destination,
R – vehicle for persons transportation,
5 – power train unit location,
5 – transversal front engine and front drive,
6 –carriage body type,
A – Hatchback (two volumes sedan) – restyled I,
7 – payload location,
7 – 5 places: 2 front places + 3 rear fix bench places,
8 – gearbox t ype,
1 – ge arbox with 5 + 1 steps,
9 – engine code and vehicle driving post location,
5 – spark ignition engine (cylinder capacity 1400 cm
3),
E7J 262 EURO 2, left hand drive,
6 – spark ignition engine (cylinder capacity 1400 cm
3),
E7J 262 EURO 3, left hand drive,
10 – year model code - 3 - 2003,
11 - 17 – carriage body manufacturing number.
Positionn 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Code
U U 1 R
VIN IDENTIFICATION NUMBER
UNITL THE DATE OF 26.06.2003
vnx.su

02 - 2
LIFTI NG MEANS
FRONT
02
Elevator positioned under vehicle body
SAFE T Y S IGN
Sit uat ions to be consi dered:
1. SI TUATI ON OF V EHI CL E COMPONE N T S DI SM OU NTI NG
When there are not av ailable four columns elevators, two columns elevators ma y be used, in
t his case, lifting s lides shall be placed under the floor closing plate, at the su pport ing points level
of the vehicle jack
2. PA RTICULARLY SITU ATI ON OF POWER-TR AIN DISMOU NTING – R E-
MOU NTI NG
In this s p ecific case, the vehicle carriag e bo dy shall be consolidated with the two columns
elevator arms us ing special s lides.
REAR
Thes e must be oblig atory p laced at the rig h t of the su pporting points of the vehicle jac k and
mus t be locked in t he holes/windows made in the floor closing plate.
vnx.su

05 - 3
DRAINING – FILLING
05Power steering
AT T E N T I ON !
For filling and addi tion, only oi l DACIA of class DEXTRON II D is t o be used.
Circuit capacity: 1 liter.
CIRCUIT FILLING
Fill the reservoir with oil.
In order to fill the circuit with oi l, easy rotate t he steeri ng wheel in bot h directions so that
steering rack is performing a complete stroke.
Check the oil level in the reservoir and addition if the case.
Start t he e ngine, easy rot ate the steeri ng wheel in both dire ctions so that steering rack is
performing a complete stroke. Restore the oil level in the reservoir till MAXI level.
LEVEL CHECKING
Each 10,000 km, check the oil level in the reservoir, that must be between the MINI-MAXI
marks.
vnx.su

VA LUES AND ADJUSTMENTS
07
07 - 2
Optional e quipment weight disposal on shafts axles

Fr ont axle Rear axle
Air conditioning 230
Power steering 170
We i g h ts (kg)
Ve rsion
V ehicle type
Unloaded vehicle weight
Maximum authorized weight
on axle
Maximum technical
admissible weight of the
loaded vehicle
M aximum technical admissible towing
weight (trailer without braking system)
Maximum technical admissible towing
W eight (trailer with braking system)
Maximum admissible weight of the
assembly
Maximum load on towing hook
T owing hook weight 1,4
R5A715
1035592
443
1075 632
443 730
800
1450 718
732
450
800
2250 2260
40
20 R5A716
1045602
443
1085 642
443
1460 728
732
Minim
Front
Rear
Maxim
Front
Rear
Front
Rear
Total
Front
Rear
vnx.su

VA LUES AND ADJUSTMENTS
07
07 - 4
Accessories belts tension
Belts tensioning values are:
- alternator belt 253 – 273 Hz
- compressor belt 150 – 155 Hz
- power steering pumps belt 151 – 161 Hz
- compressor belt / DA pump 222 ± 8 Hz
A ccessories belt tensioning method.
Belt tensioning is to be performed with cold engine.
Mount the new belt.
Tighten the belt till obtaining the prescribed mounting tensioning.
Block the tensioner.
Perform three engine crankshaft rotations. P lace t he reading head of the MOT 1505 device i n the m easurement area and check if the
belt tensioning is within the mounting prescribed values; restore is necessary.
REMARK :
Once a belt is dismounted, is not to be remounted, but replaced.
A – crankshaft C – Compressor T – Tensioner pulley.
B – alternator D – Power steeri ng pump – Tensioning checking point.
B
A
A D
TA C
T
T
vnx.su

VA LUES AND ADJUSTMENTS
07
07 - 7
Dimensions under c arriage body
DIMENSIONS UNDER CARRIAGE BODY CONDITIONING
ADJUSTMENT OPERATIONS OF THE STEERING ANGLES
H1, H4 - to be measured in front wheel axle, consequently rear wheel axle.
H2 - to be measured between the lower side of t he power train support.
H5 – to be measured between the elastic joint axle of the rear a xle arm and the ground.
vnx.su