2003 NISSAN TEANA accelerator

AT-56
TROUBLE DIAGNOSIS

Shift ShockToo sharp a
shock in change
from D
2 to D3 .ON vehicle1. Accelerator pedal position sensor
EC-272
*1, EC-652*2
2. Line pressure testAT- 4 6
3. Control valve assemblyAT-225
OFF vehicle4. High clutchAT-3015. Brake bandAT-329
Too sharp a
shock in change
from D
3 to D4 .ON vehicle1. Accelerator pedal position sensor
EC-272
*1, EC-652*2
2. Line pressure testAT- 4 6
3. Control valve assemblyAT-225
OFF vehicle4. Brake bandAT-3295. Overrun clutchAT-307
6. Forward one-way clutchAT-319
Gear change
shock felt during
deceleration by
releasing acceler-
ator pedal.ON vehicle1. Accelerator pedal position sensor
EC-272*1, EC-652*2
2. Line pressure testAT- 4 6
3. Overrun clutch solenoid valveAT-100
4. Control valve assemblyAT-225
Large shock
changing from 1
2
to 1
1 in “1” posi-
tion.ON vehicle 1. Control valve assemblyAT-225OFF vehicle 2. Low & reverse brakeAT-315
Improper Shift
TimingToo high a gear
change point from
D
1 to D2 , from
D
2 to D3 , from
D
3 to D4 .ON vehicle1. Accelerator pedal position sensor
EC-272
*1, EC-652*2
2. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
3. Shift solenoid valve AAT- 9 0
4. Shift solenoid valve BAT- 9 5
Gear change
directly from D
1
to D
3 occurs.ON vehicle1. A/T fluid levelAT- 1 4
2. Accumulator servo releaseAT-225
OFF vehicle 3. Brake bandAT-329
Too high a
change point from
D
4 to D3 , from
D
3 to D 2 , from
D
2 to D1 .ON vehicle1. Accelerator pedal position sensor
EC-272
*1, EC-652*2
2. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
Kickdown does
not operate when
depressing pedal
in D
4 within kick-
down vehicle
speed.ON vehicle1. Accelerator pedal position sensor
EC-272
*1, EC-652*2
2. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
3. Shift solenoid valve AAT- 9 0
4. Shift solenoid valve BAT- 9 5
Kickdown oper-
ates or engine
overruns when
depressing pedal
in D
4 beyond
kickdown vehicle
speed limit.ON vehicle1. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0
, AT- 8 6
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Shift solenoid valve AAT- 9 0
4. Shift solenoid valve BAT- 9 5
Gear change
from 2
2 to 23 in
“2” position.ON vehicle1. PNP switchAT-161
2. A/T positionAT-215
Items Symptom Condition Diagnostic item Reference page

TROUBLE DIAGNOSIS
AT-57
D
E
F
G
H
I
J
K
L
MA
B
AT

Improper Shift
TimingGear change
from 11 to 12 in
“1” position.ON vehicle1. PNP switchAT- 1 6 12. A/T positionAT- 2 1 5
No Down ShiftFailure to change
gear from D
4 to
D
3 .ON vehicle1. A/T fluid levelAT- 1 4
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Overrun clutch solenoid valveAT- 1 0 0
4. Shift solenoid valve A AT- 9 0
5. Line pressure solenoid valveAT- 1 2 6
6. Control valve assemblyAT- 2 2 5
OFF vehicle7. Brake bandAT- 3 2 98. Overrun clutchAT- 3 0 7
Failure to change
gear from D
3 to
D
2 or from D4 to
D
2 .ON vehicle1. A/T fluid levelAT- 1 4
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Shift solenoid valve AAT- 9 0
4. Shift solenoid valve BAT- 9 5
5. Control valve assemblyAT- 2 2 5
OFF vehicle6. High clutchAT- 3 0 17. Brake bandAT- 3 2 9
Failure to change
gear from D
2 to
D
1 or from D3 to
D
1 .ON vehicle1. A/T fluid levelAT- 1 4
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Shift solenoid valve AAT- 9 0
4. Shift solenoid valve BAT- 9 5
5. Control valve assemblyAT- 2 2 5
OFF vehicle6. Low one-way clutchAT- 2 5 57. High clutchAT- 3 0 1
8. Brake bandAT- 3 2 9
Failure to change
from 3
3 to 22
when changing
lever into “2” posi-
tion.
AT-198ON vehicle1. Accelerator pedal position sensor
EC-272
*1, EC-652*2
2. Shift solenoid valve BAT- 9 5
3. Control valve assembly AT- 2 2 5
4. A/T positionAT- 2 1 5
OFF vehicle 5. Brake bandAT- 3 2 9
Does not change
from 1
2 to 11 in
“1” position.ON vehicle1. PNP switchAT- 1 6 1
2. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
3. Shift solenoid valve AAT- 9 0
4. Control valve assemblyAT- 2 2 5
5. Overrun clutch solenoid valveAT- 1 0 0
OFF vehicle6. Overrun clutchAT- 3 0 77. Low & reverse brakeAT- 3 1 5
Items Symptom Condition Diagnostic item Reference page

AT-58
TROUBLE DIAGNOSIS

No Up ShiftFailure to change
gear from D
1 to
D
2 .ON vehicle1. A/T positionAT-215
2. Shift solenoid valve AAT- 9 0
3. Control valve assemblyAT-225
4. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
5. Accelerator pedal position sensor
EC-272*1, EC-652*2
OFF vehicle 6. Brake bandAT-329
Failure to change
gear from D
2 to
D
3 .ON vehicle1. A/T positionAT-215
2. Shift solenoid valve BAT- 9 5
3. Control valve assemblyAT-225
4. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
5. Accelerator pedal position sensor
EC-272*1, EC-652*2
OFF vehicle6. High clutchAT-3017. Brake bandAT-329
Failure to change
gear from D
3 to
D
4 .ON vehicle 1. PNP switchAT-161
2. 3rd position switchAT-161
3. A/T positionAT-215
4. Shift solenoid valve AAT- 9 0
5. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
6. A/T fluid temperature sensorAT- 11 0
OFF vehicle 7. Brake band AT-329
A/T does not shift
to D
4 when driv-
ing with changing
lever into “D”
position.ON vehicle1. Accelerator pedal position sensor
EC-272
*1, EC-652*2
2. PNP switchAT-161
3. 3rd position switchAT-161
4. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
5. Shift solenoid valve AAT- 9 0
6. Overrun clutch solenoid valveAT-100
7. Control valve assemblyAT-225
8. A/T fluid temperature sensorAT- 11 0
9. Line pressure solenoid valveAT-126
OFF vehicle10. Brake bandAT-32911. Overrun clutchAT-307
Items Symptom Condition Diagnostic item Reference page

TROUBLE DIAGNOSIS
AT-59
D
E
F
G
H
I
J
K
L
MA
B
AT

Slips/Will Not
EngageVehicle will not
run in “R” position
(but runs in “D”,
“3”, “2” and “1”
positions). Clutch
slips.
Very poor accel-
eration.ON vehicle1. A/T positionAT- 2 1 5
2. Stall testAT- 4 3
3. Line pressure testAT- 4 6
4. Line pressure solenoid valveAT- 1 2 6
5. Control valve assemblyAT- 2 2 5
OFF vehicle6. Reverse clutchAT- 2 9 6
7. High clutchAT- 3 0 1
8. Forward clutchAT- 3 0 7
9. Overrun clutchAT- 3 0 7
10. Low & reverse brakeAT- 3 1 5
Vehicle will not
run in “D”, “3” and
“2” positions (but
runs in “1” and
“R” positions).ON vehicle 1. A/T positionAT- 2 1 5
OFF vehicle 2. Low one-way clutchAT- 2 5 5
Vehicle will not
run in “D”, “3”, “2”
and “1” positions
(but runs in “R”
position). Clutch
slips.
Very poor accel-
eration.ON vehicle1. A/T fluid levelAT- 1 4
2. Stall testAT- 4 3
3. Line pressure testAT- 4 6
4. Line pressure solenoid valveAT- 1 2 6
5. Control valve assemblyAT- 2 2 5
6. N-D accumulatorAT- 2 2 5
OFF vehicle7. Reverse clutchAT- 2 9 6
8. High clutchAT- 3 0 1
9. Forward clutchAT- 3 0 7
10. Forward one-way clutchAT- 3 1 9
11. Low one-way clutchAT- 2 5 5
Clutches or
brakes slip some-
what in starting.ON vehicle1. A/T fluid levelAT- 1 4
2. A/T positionAT- 2 1 5
3. Accelerator pedal position sensor
EC-272*1, EC-652*2
4. Line pressure testAT- 4 6
5. Line pressure solenoid valveAT- 1 2 6
6. Control valve assemblyAT- 2 2 5
7. N-D accumulatorAT- 2 2 5
OFF vehicle8. Forward clutchAT- 3 0 7
9. Reverse clutchAT- 2 9 6
10. Low & reverse brakeAT- 3 1 5
11. Oil pumpAT- 2 7 5
12. Torque converterAT- 2 5 5
Items Symptom Condition Diagnostic item Reference page

AT-60
TROUBLE DIAGNOSIS

Slips/Will Not
EngageNo creep at all.
AT- 1 7 9
, AT-181
ON vehicle1. A/T fluid levelAT- 1 42. Line pressure testAT- 4 6
3. Control valve assemblyAT-225
OFF vehicle4. Forward clutchAT-3075. Oil pumpAT-275
6. Torque converterAT-255
Almost no shock
or clutches slip-
ping in change
from D
1 to D2 .ON vehicle1. A/T fluid levelAT- 1 4
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Line pressure testAT- 4 6
4. Accumulator servo releaseAT-225
5. Control valve assemblyAT-225
OFF vehicle 6. Brake bandAT-329
Almost no shock
or slipping in
change from D
2
to D
3 .ON vehicle1. A/T fluid levelAT- 1 4
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Line pressure testAT- 4 6
4. Control valve assemblyAT-225
OFF vehicle5. High clutchAT-3016. Forward clutchAT-307
Almost no shock
or slipping in
change from D
3
to D
4 .ON vehicle1. A/T fluid levelAT- 1 4
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Line pressure testAT- 4 6
4. Control valve assemblyAT-225
OFF vehicle 5. Brake bandAT-329
Races extremely
fast or slips in
changing from D
4
to D
3 when
depressing pedal.ON vehicle1. A/T fluid levelAT- 1 4
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Line pressure testAT- 4 6
4. Line pressure solenoid valveAT-126
5. Shift solenoid valve AAT- 9 0
6. Control valve assemblyAT-225
OFF vehicle7. Brake bandAT-3298. Forward clutchAT-307
Races extremely
fast or slips in
changing from D
4
to D
2 when
depressing pedal.ON vehicle1. A/T fluid levelAT- 1 4
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Line pressure testAT- 4 6
4. Line pressure solenoid valveAT-126
5. Shift solenoid valve AAT- 9 0
6. Shift solenoid valve BAT- 9 5
7. Control valve assemblyAT-225
OFF vehicle8. Brake bandAT-3299. Forward clutchAT-307
Items Symptom Condition Diagnostic item Reference page

TROUBLE DIAGNOSIS
AT-61
D
E
F
G
H
I
J
K
L
MA
B
AT

Slips/Will Not
EngageRaces extremely
fast or slips in
changing from D
3
to D
2 when
depressing pedal. ON vehicle1. A/T fluid levelAT- 1 4
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Line pressure testAT- 4 6
4. Line pressure solenoid valveAT- 1 2 6
5. Shift solenoid valve BAT- 9 5
6. Control valve assemblyAT- 2 2 5
OFF vehicle7. Brake bandAT- 3 2 98. High clutchAT- 3 0 1
Races extremely
fast or slips in
changing from D
4
or D
3 to D 1
when depressing
pedal.ON vehicle1. A/T fluid levelAT- 1 4
2. Accelerator pedal position sensor
EC-272*1, EC-652*2
3. Line pressure testAT- 4 6
4. Line pressure solenoid valveAT- 1 2 6
5. Shift solenoid valve AAT- 9 0
6. Shift solenoid valve BAT- 9 5
7. Control valve assemblyAT- 2 2 5
OFF vehicle8. Forward clutchAT- 3 0 79. Forward one-way clutchAT- 3 1 9
10. Low one-way clutchAT- 2 5 5
Vehicle will not
run in any posi-
tion.ON vehicle1. A/T fluid levelAT- 1 4
2. A/T positionAT- 2 1 5
3. Line pressure testAT- 4 6
4. Line pressure solenoid valveAT- 1 2 6
OFF vehicle5. Oil pumpAT- 2 7 5
6. High clutchAT- 3 0 1
7. Brake bandAT- 3 2 9
8. Low & reverse brakeAT- 3 1 5
9. Torque converterAT- 2 5 5
10. Parking componentsAT- 2 4 6
OthersEngine cannot be
started in “P” and
“N” positions.
AT-175
ON vehicle1. Ignition switch and starterPG-3
, SC-14 .
2. A/T positionAT- 2 1 5
3. PNP switchAT- 1 6 1
Engine starts in
positions other
than “P” and “N”.ON vehicle1. A/T positionAT- 2 1 5
2. PNP switchAT- 1 6 1
Transaxle noise
in “P” and “N”
positions.ON vehicle1. A/T fluid levelAT- 1 4
2. Line pressure testAT- 4 6
3. Accelerator pedal position sensor
EC-272*1, EC-652*2
4. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
OFF vehicle5. Oil pumpAT- 2 7 56. Torque converterAT- 2 5 5
Items Symptom Condition Diagnostic item Reference page

TROUBLE DIAGNOSIS
AT-63
D
E
F
G
H
I
J
K
L
MA
B
AT

OthersMaximum speed
not attained.
Acceleration
poor.ON vehicle1. A/T fluid levelAT- 1 4
2. PNP switchAT- 1 6 1
3. 3rd position switchAT- 1 6 1
4. Accelerator pedal position sensor
EC-272*1, EC-652*2
5. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
6. Shift solenoid valve AAT- 9 0
7. Shift solenoid valve BAT- 9 5
8. Control valve assemblyAT- 2 2 5
OFF vehicle9. Reverse clutchAT- 2 9 6
10. High clutchAT- 3 0 1
11. Brake bandAT- 3 2 9
12. Low & reverse brakeAT- 3 1 5
13. Oil pumpAT- 2 7 5
14. Torque converterAT- 2 5 5
Transaxle noise
in “D”, “3”, “2”, “1”
and “R” positions.ON vehicle 1. A/T fluid levelAT- 1 4
OFF vehicle 2. Torque converterAT- 2 5 5
Engine brake
does not operate
in “1” position.ON vehicle1. PNP switchAT- 1 6 1
2. A/T positionAT- 2 1 5
3. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTRAT- 8 0, AT- 8 6
4. Control valve assemblyAT- 2 2 5
5. Overrun clutch solenoid valveAT- 1 0 0
OFF vehicle6. Overrun clutchAT- 3 0 77. Low & reverse brakeAT- 3 1 5
Transaxle over-
heats.ON vehicle1. A/T fluid levelAT- 1 4
2. Engine idle speed
EC-45*1, EC-387*2
3. Accelerator pedal position sensor
EC-272*1, EC-652*2
4. Line pressure testAT- 4 6
5. Line pressure solenoid valveAT- 1 2 6
6. Control valve assemblyAT- 2 2 5
OFF vehicle7. Oil pumpAT- 2 7 5
8. Reverse clutchAT- 2 9 6
9. High clutchAT- 3 0 1
10. Brake bandAT- 3 2 9
11. Forward clutchAT- 3 0 7
12. Overrun clutchAT- 3 0 7
13. Low & reverse brakeAT- 3 1 5
14. Torque converterAT- 2 5 5
Items Symptom Condition Diagnostic item Reference page

AT-64
TROUBLE DIAGNOSIS

*1: QR engine
*2: VQ engine
TCM Terminals and Reference ValueBCS0010C
TCM CONNECTOR TERMINAL LAYOUT
TCM INSPECTION TABLE
Data are reference value and are measured between each terminal and ground.
OthersATF shoots out
during operation.
White smoke
emitted from
exhaust pipe dur-
ing operation.ON vehicle 1. A/T fluid levelAT- 1 4
OFF vehicle2. Reverse clutchAT-296
3. High clutchAT-301
4. Brake bandAT-329
5. Forward clutchAT-307
6. Overrun clutchAT-307
7. Low & reverse brakeAT-315
Offensive smell at
fluid charging
pipe.ON vehicle 1. A/T fluid levelAT- 1 4
OFF vehicle2. Torque converterAT-255
3. Oil pumpAT-275
4. Reverse clutchAT-296
5. High clutchAT-301
6. Brake bandAT-329
7. Forward clutchAT-307
8. Overrun clutchAT-307
9. Low & reverse brakeAT-315
Items Symptom Condition Diagnostic item Reference page
SCIA0495E
Terminal Wire color Item ConditionJudgement stan-
dard (Approx.)
1 G/RLine pressure sole-
noid valveWhen releasing accelerator pedal
after warming up engine.1.5 - 3.0 V
When depressing accelerator pedal
fully after warming up engine.0V
2W/BLine pressure sole-
noid valve (with drop-
ping resistor)When releasing accelerator pedal
after warming up engine.4 - 14 V
When depressing accelerator pedal
fully after warming up engine.0V
3 G/BTorque converter
clutch solenoid valveWhen A/T performs lock-up. 8 - 15 V
When A/T does not perform lock-up. 0 V
5 L CAN-H — —
6P CAN-L — —