SC-26
STARTING SYSTEM
ASSEMBLY
Apply high-temperature grease to lubricate the bearing, gears and frictional surface when assembling the
starter.
Carefully observe the following instructions.
Pinion Protrusion Length Adjustment
CLEARANCE (VQ23DE AND VQ35DE MODELS)
With pinion driven out by magnetic switch, push pinion back to
remove slack and measure clearance “L” between the front
edge of the pinion and the pinion stopper.
Not in the specified value... Adjust by adjusting plate.
MOVEMENT (QR20DE MODELS)
Compare movement “L” in height of pinion when it is pushed out
with magnetic switch energized and when it is pulled out by
hand until it touches stopper.
Not in the specified value... Adjust by adjusting plate.Clearance “L” : Refer to SDS. SC-38, "
Starter" .
SKIB0229E
SEL633BA
Movement “L” : Refer to SDS. SC-38, "Starter" .
SKIB0230E
SEL633BA
