Page 1039 of 4500
1.REMOVE FRONT WHEEL
2.DRAIN BRAKE FLUID
a. Draw out fluid with syringe.
3.REMOVE FRONT DISC BRAKE W/HOLE PIN
a. Remove the clip.
b. Remove the front disc brake anti-rattle w/hole pin while pushing on the anti-rattle spring.
4.REMOVE FRONT DISC BRAKE ANTI-RATTLE SPRING
Fig. 71: Removing Front Disc Brake Anti
-Rattle W/Hole Pin While Pushing On Anti-Rattle Spring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5.REMOVE DISC BRAKE PAD KIT FRONT (PAD ONLY)
a. Remove the 2 pads and the 2 anti-squeal shims from each pad.
Page 1053 of 4500
a. Connect the flexible hose with the union bolt and a new gasket.
Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)
HINT:
Install the flexible hose lock securely in the lock hole in the disc brake cylinder assy.
Fig. 85: Connecting Flexible Hose With Union Bolt And Gasket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
23.INSTALL DISC BRAKE PAD KIT FRONT (PAD ONLY)
a. Right wheel:
Connect the pad wear indicator to the inner pads, and install a new clip.
HINT:
Page 1054 of 4500
Install the clip lock securely in the grooves of the pad.
Fig. 86: Connecting Pad Wear Indicator To Inner Pads
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Apply disc brake grease to the anti squeal shims and install them to each pad.
c. Install the pad wear indicator to the inner pad.
Page 1058 of 4500
Overhaul the RH side by using the same procedures as for the LH side.
1.REMOVE REAR WHEEL
2.DRAIN BRAKE FLUID
a. Draw out fluid with syringe.
3.REMOVE REAR DISC BRAKE W/HOLE PIN
a. Remove the clip.
b. Remove the rear disc brake w/hole pin while pushing on the rear disc brake anti-rattle spring.
4.REMOVE REAR DISC BRAKE ANTI-RATTLE SPRING
5.REMOVE DISC BRAKE PAD KIT REAR (PAD ONLY)
a. Remove the 2 pads and the 2 anti-squeal shims from each pad.
Page 1073 of 4500
a. Connect the flexible hose with the union bolt and a new gasket.
Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)
HINT:
Install the flexible hose lock securely in the lock hole in the caliper.
Fig. 105: Connecting Flexible Hose With Union Bolt And Gasket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
26.INSTALL DISC BRAKE PAD KIT REAR (PAD ONLY)
a. Right wheel:
Connect the pad wear indicator to the inner pads, and install a new clip.
HINT:
Page 1074 of 4500
Install the clip lock securely in the grooves of the pad.
Fig. 106: Connecting Pad Wear Indicator To Inner Pads
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Apply disc brake grease to the anti squeal shims and install them to each pad.
c. Install the pad wear indicator to the inner pad.
