2003 LEXUS LS430 Rear suspension

<0029004c004a0011000300190014001d000300350048005000520059004c0051004a00030027004c0049004900480055004800510057004c0044004f0003003600580053005300520055005700030033005500520057004800460057005200550003003100
5200110003001500030031005800570056[
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5.REMOVE REAR SUSPENSION MEMBER BRACE LH
a. Remove the 2 bolts, and suspension member brace.

Fig. 62: Removing Rear Suspension Member Brace Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
6.SEPARATE PARKING BRAKE CABLE ASSY NO. 3
a. Remove the 2 bolts, and separate the parking brake cable No. 3 from body.

Fig. 69: Disconnecting Upper Control Arm Assy From Axle Carrier
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
14.SEPARATE REAR SUSPENSION ARM ASSY NO. 2 LH
a. Remove the nut.
b. Using SST, disconnect the suspension arm No. 2 from the axle carrier.
SST 09628-00011

Fig. 70: Disconnecting Suspension Arm No. 2 From Axle Carrier
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
15.DISCONNECT REAR DRIVE SHAFT ASSY LH
a. Using a plastic hammer, separate the drive shaft from the axle hub.
b. Remove the nut, and separate the upper control arm assy.
16.REMOVE REAR DRIVE SHAFT ASSY LH
a. Using SST, remove the rear drive shaft assy LH.
SST 09520-01010, 09520-24010 (09520-32040)

<0029004c004a00110003001a0017001d0003002c0047004800510057004c0049005c004c0051004a00030036004b00520046004e0003002400450056005200550045004800550003002400560056005c000300350048004400550003002f002b0003003100
580057[
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
21.INSTALL REAR SUSPENSION ARM ASSY NO. 2 LH
a. Install the rear suspension arm assy No.2 LH with the new nut.
Torque: 70 N.m (714 kgf.cm, 52 ft.lbf)

Fig. 75: Identifying Rear Suspension Arm Assy No. 2 LH Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
22.INSTALL TOE CONTROL LINK SUB-ASSY LH
a. Install the toe control link assy LH with the new nut.
Torque: 50 N.m (510 kgf.cm, 37 ft.lbf)

Fig. 81: Identifying Parking Brake Cable Assy No. 3 Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
29.INSTALL REAR SUSPENSION MEMBER BRACE LH
a. Install the rear suspension member brace to the body with the 2 bolts.
Torque: 50 N.m (510 kgf.cm, 37 ft.lbf)

Fig. 84: Installing Rear Stabilizer Link Assy LH Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
32.INSTALL HEIGHT CONTROL SENSOR LINK SUB-ASSY REAR
a. Align the matchmarks and connect the height control sensor link to the rear suspension arm assy
No.2 LH.
b. Install and torque the 6 bolts, washers and nuts.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)