2003 CHEVROLET SILVERADO ECU

[x] Cancel search: ECU

Page 67 of 556

CHEVROLET SILVERADO 2003 1.G Owners Manual If your child restraint does not have the LATCH system,
you will be using the lap-shoulder belt to secure the
child restraint in this position. Be sure to follow the
instructions that came with the ch

Page 68 of 556

CHEVROLET SILVERADO 2003 1.G Owners Manual 5. Pull the rest of the shoulder belt all the way out of
the retractor to set the lock.6. To tighten the belt, feed the shoulder belt back into
the retractor while you push down on the child
restraint

Page 72 of 556

CHEVROLET SILVERADO 2003 1.G Owners Manual {CAUTION:
Anyone who is up against, or very close to,
any air bag when it in¯ates can be seriously
injured or killed. Air bags plus lap-shoulder
belts offer the best protection for adults, but
not fo

Page 81 of 556

CHEVROLET SILVERADO 2003 1.G Owners Manual To turn off the right front passengers air bag, insert
your ignition key into the switch, push in, and move the
switch to the off position.
The AIR BAG OFF light will come on to let you know
that the

Page 83 of 556

CHEVROLET SILVERADO 2003 1.G Owners Manual Accident statistics show that children are safer if they
are restrained in the rear rather than the front seat.
General Motors, therefore, recommends that child
restraints be secured in a rear seat, i

Page 84 of 556

CHEVROLET SILVERADO 2003 1.G Owners Manual ·the right front passenger seat is occupied by a
smaller person, such as a child who has outgrown
child restraints
·the air bag off switch is in the off position
·or if there is a critical problem

Page 89 of 556

CHEVROLET SILVERADO 2003 1.G Owners Manual Keys...............................................................2-3
Remote Keyless Entry System.........................2-4
Remote Keyless Entry System Operation...........2-5
Doors and Locks......

Page 95 of 556

CHEVROLET SILVERADO 2003 1.G Owners Manual Resynchronization
Resynchronization may be necessary due to the
security method used by this system. The transmitter
does not send the same signal twice to the receiver. The
receiver will not respond