2002 HONDA PASSPORT Owners Manual

230Care and Maintenance
Cleaning Glass Surfaces
Glass surfaces should be cleaned
on a regular basis. Use of glass
cleaner will remove normal
tobacco smoke and dust films
sometimes caused by ingredients
used in vinyls and interior
plastics.
Never use abrasive cleaners to
clean the glass. They may cause
scratches or damage the defogger
wires in the rear window.Tinted Glass
Tinted, heat-reflecting glass has a
metal coating on the interior side.
Always clean this metal coating
with plain water or a neutral
detergent, not harsh chemicals.
Wipe with a clean, soft cloth or a
paper towel.

231Technical Data
Vehicle Identification232
. . . . . .
Vehicle Loading233 . . . . . . . . . .
Specifications 235 . . . . . . . . . . .
Technical Data

232Technical Data
Vehicle Identification
Number (
VIN)
This is the legal identification of the
vehicle. It appears on a plate attached
to the left top of the instrument panel
and can be easily seen through the
windshield from outside the vehicle.
Engine type – W; 6VD1 3.2L
4S6DM58WI24400032
The VIN also appears on the
vehicle’s Certification Label on
the driver’s door lock pillar.
Engine Identification
You can identify your engine from
the
VIN. The eighth character of
the
VIN is the engine code that
gives the engine model (refer to
the illustration).
Some information in this section
may refer to the engine model.
The engine number is stamped on
the left side of the cylinder block
near the starter.
Service Parts Identification
The Vehicle Information Plate
(Service Parts
ID Plate) is
provided on all vehicle models.
It is located on the center dash
wall inside the engine
compartment. The plate lists the
VIN (Vehicle Identification
Number), paint information and
all production options and special
Vehicle Identification

233Technical Data
equipment on the vehicle when it
was shipped from the factory. Be
sure to provide this information to
your authorized Honda dealer
when it is necessary to order
parts.
Vehicle Loading Information
The components of your vehicle
are designed to provide
satisfactory service only if the
vehicle is not loaded in excess of
either the Gross Vehicle Weight
Rating (
GVWR) or the maximum
front and rear Gross Axle Weight
Ratings (
GAWRs). These ratings
are listed on the Vehicle
Certification Label located on the
left door lock pillar.
Your Honda dealer can advise you
of the proper loading conditions
for your vehicle. The use of
selected heavier suspension
components for added durability
purposes does not increase any of
the weight ratings printed on the
Vehicle Certification Label.
Maximum Front and Rear
Axle Weight
The weight of the cargo load must
be properly distributed over both
the front and rear axles. The
Certification Label shows the
maximum weight that the front
axle (front
GAWR) can carry. It
also shows the maximum weight
that the rear axle (rear
GAWR) can
carry. The
GVWR represents the
maximum permissible loaded
weight of the vehicle and takes
into account the engine,
transmission, frame, springs,
brake, axle, and tire capabilities.
Actual loads on the front and rear
axles can only be determined by
weighing the vehicle. This can be
done at highway weight stations
or other such commercial weigh
stations. Consult your Honda
dealer for assistance. The cargo
Vehicle Loading

234Technical Data
load should be distributed on both
sides as equally as possible.
Effect on Warranty
Your Limited Warranty on your
new Honda vehicle does not apply
to any part of your vehicle that
has been subject to misuse. Any
part which fails because of
overloading is considered misuse.
Vehicle Certification Label
The Certification Label shows
the
GVWR and the front and rear
GAWRs for your vehicle.
Gross Vehicle Weight (
GVW) is
the weight of the originally
equipped vehicle and all items
added to it after it has left the
factory. This includes the driver
and all occupants, and the load the
vehicle is carrying. The
GVW
must not exceed the GVWR. Also,
the front and rear gross axle
weight must not exceed the front
and rear
GAWRs.

Technical Data235
These specifications are given here for information only. Before using them, see the cautions and other instructions
throughout this manual. For further information, see the Service Manual covering the cha\
ssis or body parts in question.
Your Honda dealer may also be able to help.
Engine
Engine modelV632LItemV6-3.2L
Engine typeWater cooled 4-stroke, 75
V
Piston displacement193.1 cu.in. (3,165 cc)
Number of cylinders6
Compression ratio9.1:1
Spark plugsPK16PR11
Spark plug gap0.04 in. (1.05 mm)
Oil filterFull-flow cartridge type
Oil capacity (Original factory fill or rebuilt engine)6.3 U.S. quarts (6.0 liters)
*Oil capacity (Service change)
with filter change
without filter change
5.0 U.S. quarts (4.7 liters)
4.2 U.S. quarts (4.0 liters)
Idle speed750 rpm
Valve clearance (Cold)Intake
Exhaust0.011
0.002 in. (0.28
0.05 mm)
0.012
0.002 in. (0.30
0.05 mm)
* Oil capacities shown are approximate refill capacities.
* After refill, recheck oil level.
Specifications

236Technical Data
Cooling System
Radiator typeTube and corrugated fins pressure type
Capacity11.2 U.S. quarts (10.6 liters) for MT
11.1 U.S. quarts (10.5 liters) for AT
ThermostatWax pellet type 170
F (76.5
C)
Air Conditioning
Refrigerant typeR-134a
Charge quantity22.9 oz (650g)
Lubricant typePAG oil
Clutch
TransmissionMUA
Clutch size10.24 in. (260 mm)
TypeDry single plate disc with diaphragm spring
Clutch control
operationHydraulic
Clutch pedal
free play0.2 in. – 0.6 in.
(5 mm – 15 mm)

Technical Data237
Manual Transmission and Transfer Case
2WD 4WD
Gear ratio Transmission
Rev.
1st
2nd
3rd
4th
5th
Transfer case High
Low
3.873
3.767
2.248
1.404
1.000
0.809
–
–3.873
3.767
2.248
1.404
1.000
0.809
1.000
2.051
Oil capacityTransmission
3.1 U.S. quarts
(2.95 liters)3.1 U.S. quarts
(2.95 liters)
Transfer case–1.5 U.S. quarts
(1.45 liters)
Automatic Transmission and Transfer Case
2WD 4WD
Gear ratio Transmission
Rev.
1st
2nd
3rd
Overdrive
Transfer case High
Low
2.000
2.856
1.618
1.000
0.723
–
–2.000
2.856
1.618
1.000
0.723
1.000
2.051
Gear control
operationFloor control
Fluid CapacityTransmission
Transfer case
9.1 U.S. quarts (8.6 liters)
–9.1 U.S. quarts(8.6 liters)
1.5 U.S. quarts (1.45 liters)
Fuel Tank Capacity
19.5 U.S. gallons (75 liters)