H16644
H16643
H05546
± BODYREAR DOOR
BO±19
3572 Author: Date:
2005 SEQUOIA (RM1146U)
6. REMOVE INSIDE HANDLE
(a) Slide the inside handle backward to remove it.
(b) Disconnect the 2 cables from inside handle as shown in
the illustration.
7. REMOVE SERVICE HOLE COVER
(a) Using a clip remover, remove the clamp and grommets.
(b) Remove the service hole cover.
NOTICE:
Do not tear the cover.
HINT:
At the time of reassembly, please refer to the following item.
Bring out the 2 control cables and wire harness through the ser-
vice hole cover.
8. REMOVE DIVISION BAR
HINT:
Insert a shop rag inside the door panel to prevent scratching the
glass.
(a) Open the door glass until the bolts appear in the service
hole.
(b) Remove the 2 door glass set nuts.
(c) Remove the door glass from the glass bracket and lower
the door glass into the door panel.
NOTICE:
Do not damage the door glass.
HINT:
Position the door glass toward the front as much as possible.
(d) Remove the door glass run.
(e) Remove the 2 bolts and screw.
(f) Pull the division bar forward.
