2001 TOYOTA SEQUOIA child lock

05_SEQUOIA_U (L/O 0408)
132
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
2. Turn up the covers for the lower an-
chorages. Confirm the position of
the lower anchorages below the but-
ton on the cover.
3. Type AÐLatch the hooks of lower
straps onto the anchorages and
tighten the lower straps.
Type BÐLatch the buckles onto the
anchorages.
For owners in CanadaÐThe symbol on
a child restraint system indicates the pres-
ence of a lower connector system.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see ªÐUsing
a top strap (for separate type second
seats)º on page 123 in this section.)
For installation details, refer to the instruc-
tion manual equipped with each product.CAUTION

When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.

Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.

After securing the child restraint
system, never slide or recline the
seat.

Do not install a child restraint sys-
tem on the second seat if it inter-
feres with the lock mechanism of
the front seats. Otherwise, the child
or front seat occupant(s) may be
killed or seriously injured in case
of sudden braking or a collision.
Lower anchorages for the child restraint
systems complying with the FMVSS225
or CMVSS210.2 specifications are
installed in the right side position of
the third seats.
The anchorages are installed in the clear-
ance between the seat cushion and seat-
back for right side position of the third
seats.
Child restraint systems complying with the
FMVSS213 or CMVSS213 specification
can be fixed to these anchorages. In this
case, it is not necessary to fix the child
restraint system with a seat belt on the
vehicle.
ÐInstallation with child
restraint lower anchorages
(for third seats)

05_SEQUOIA_U (L/O 0408)
133
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
Most upright
position
CHILD RESTRAINT SYSTEM
INSTALLATION
1. Fold down the seatback and back to
the most upright position until it
locks into place.
Make sure the seatback is locked secure-
ly.
Canada only Covers
Ty p e ACanada only Cover
Ty p e B

05_SEQUOIA_U (L/O 0408)
134
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
2. Turn up the cover for lower anchor-
ages of the right side position. Con-
firm the position of the lower an-
chorages below the button on the
cover.
3. Type AÐLatch the hooks of lower
straps onto the anchorages and
tighten the lower straps.
Type BÐLatch the buckles onto the
anchorages.
For owners in CanadaÐThe symbol on
a child restraint system indicates the pres-
ence of a lower connector system.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see ªÐUsing
a top strap (for third seats)º on page 125
in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.CAUTION

When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.

Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.

When using lower anchorages for a
child restraint system on the third
seats, ensure that the seat is
moved to the rear±most position,
with the seatback close to the child
restraint system.

After securing the child restraint
system, never slide or recline the
seat.

Do not install a child restraint sys-
tem on the third seat if it interferes
with the lock mechanism of the sec-
ond seats. Otherwise, the child or
front seat occupant(s) may be killed
or seriously injured in case of sud-
den braking or a collision.

05_SEQUOIA_U (L/O 0408)
247
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
REPLACING CONTROLLER BATTERY
For replacement, use a CR2025 lithium
battery or equivalent.
CAUTION
Special care should be taken that
small children do not swallow the re-
moved battery or components.
NOTICE

When replacing the battery, be care-
ful not to lose the components.

Replace only with the same or
equivalent type of battery recom-
mended by a Toyota dealer.

Dispose of used batteries according
to local regulations.
Replace the battery by using the following
procedures:
1. Pull the case out while pushing the
lock release button to the side.2. Remove the discharged battery.
3. Put in a new battery with the positive
(+) side up.
Put it in the case securely.
NOTICE

Be sure that the positive side of
the controller battery is facing cor-
rectly.

Do not replace the battery with wet
hands. Water may cause rust.

Do not touch or move any compo-
nents inside of the controller, or it
may interfere with proper operation.