2001 TOYOTA SEQUOIA ac pump

SS08X±05
± SERVICE SPECIFICATIONSSTEERING
SS±45
187 Author: Date:
2005 SEQUOIA (RM1146U)
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
TILT STEERING COLUMN
Steering wheel pad set screw (Torx screw)8.89078 in.´lbf
Steering wheel set nut5051037
Control valve shaft x No. 2 intermediate shaft assembly3536026
No. 2 intermediate shaft assembly x Sliding yoke3536026
No. 2 universal joint assembly x Sliding yoke3536026
No. 2 universal joint assembly x Main shaft assembly3536026
Steering column assembly set nut2626019
Column hole cover No. 2 set bolt8.08271 in.´lbf
Shift lever set bolt1818013
Shift lever housing x Column tube assembly121209
Turn signal bracket x Steering column housing7.57565 in.´lbf
Tilt lever lock shaft9.09078 in.´lbf
PS VANE PUMP
Union bolt x Pressure feed tube46.547534
PS vane pump assembly set stud bolt2222016
PS vane pump assembly set bolt and nut4445033
Suction port union set bolt131309
Pressure port union8385061
Front housing x Rear housing2424017
PS GEAR
Turn pressure tube union nut13 (15)135 (150)10 (11)
Tie rod end lock nut5556041
Rack x Rack end76 (103)770 (1,050)56 (76)
Rack guide spring cap lock nut44 (59)450 (600)32 (43)
Rack housing cap5960043
Self±locking nut2525018
Control valve housing set bolt1818513
PS gear assembly set bolt1651,700123
PS gear assembly set bolt and nut1301,35096
Bracket x Body Bolt and nut1651,700123
Bracket x Body Stud bolt2020015
Pressure feed and return tubes x Control valve housing22 (25)227 (250)16 (18)
No. 2 intermediate shaft assembly x No. 2 universal joint assembly3536026
Control valve shaft x No. 2 intermediate shaft assembly3536026
Tie rod end x Lower arm9193067
( ): For use without SST

DID7O±02
± DIAGNOSTICSENGINE
DI±3
197 Author: Date:
2005 SEQUOIA (RM1146U)
TOYOTA PART AND SYSTEM NAME LIST
This reference list indicates the part names used in this manual along with their definitions.
TOYOTA/LEXUS nameDefinition
Toyota HCAC system, Hydro±carbon Adsorptive Catalyst
(HCAC) system, HC adsorptive three±way catalystHC adsorptive three±way catalytic converter
Variable Valve Timing sensor, VVT sensorCamshaft position sensor
Variable valve timing system, VVT systemCamshaft timing control system
Camshaft timing oil control valve, Oil control valve, OCV,
VVT, VSVCamshaft timing oil control valve
Variable timing and lift, VVTLCamshaft timing and lift control
Crankshaft position sensor ºAºCrankshaft position sensor
Engine speed sensorCrankshaft position sensor
THAIntake air temperature
Knock control moduleEngine knock control module
Knock sensorEngine knock sensor
Mass or volume air flow circuitMass air flow sensor circuit
Vacuum sensorManifold air pressure sensor
Internal control module, Control module, Engine control
ECU, PCMPower train control module
FC idleDeceleration fuel cut
Idle air control valveIdle speed control
VSV for CCV, Canister close valve VSV for canister controlEvaporative emissions canister vent valve
VSV for EVAP, Vacuum switching valve assembly No. 1,
EVAP VSV, Purge VSVEvaporative emissions canister purge valve
VSV for pressure switching valve, Bypass VSVEvaporative emission pressure switching valve
Vapor pressure sensor, EVAP pressure sensor, Evaporative
emission control system pressure sensorFuel tank pressure sensor
Charcoal canisterEvaporative emissions canister
ORVR systemOn±board refueling vapor recovery system
Intake manifold runner controlIntake manifold tuning system
Intake manifold runner valve, IMRV, IACV (runner valve)Intake manifold tuning valve
Intake control VSVIntake manifold tuning solenoid valve
AFSAir fuel ratio sensor
O2 sensorHeater oxygen sensor
Oxygen sensor pumping current circuitOxygen sensor output signal
Oxygen sensor reference ground circuitOxygen sensor signal ground
Accel position sensorAccelerator pedal position sensor
Throttle actuator control motor, Actuator control motor, Elec-
tronic throttle motor, Throttle control motorElectronic throttle actuator
Electronic throttle control system, Throttle actuator control
systemElectronic throttle control system
Throttle/pedal position sensor, Throttle/pedal position switch,
Throttle position sensor/switchThrottle position sensor
Turbo press sensorTurbocharger pressure sensor
Turbo VSVTurbocharger pressure control solenoid valve
P/S pressure switchPower±steering pressure switch
VSV for ACMActive control engine mount

DI±4
± DIAGNOSTICSENGINE
198 Author: Date:
2005 SEQUOIA (RM1146U) Speed sensor, Vehicle speed sensor ºAº, Speed sensor for
skid control ECU
Vehicle speed sensor
ATF temperature sensor, Trans. fluid temp. sensor, ATF
temperature sensor ºAºTransmission fluid temperature sensor
Electronic controlled automatic transmission, ECTElectronically controlled automatic
Intermediate shaft speed sensor ºAºCounter gear speed sensor
Output speed sensorOutput shaft speed sensor
Input speed sensor, Input turbine speed sensor ºAº, Speed
sensor (NT), Turbine speed sensorInput turbine speed sensor
PNP switch, NSWPark/neutral position switch
Pressure control solenoidTransmission pressure control solenoid
Shift solenoidTransmission shift solenoid valve
Transmission control switch, Shift lock control unitShift lock control module
Engine immobiliser system, Immobiliser systemVehicle anti±theft system
Air switching valve (ASV)Secondary air injection control valve
AI systemSecondary air injection system
Air pumpSecondary air injection pump
Air switching valve No.2 (ASV No.2)Secondary air injection bypass valve Bank 1, 2
VSV for air injection controlSecondary air injection vacuum switching valve
Air injection driverSecondary air injection driver

DID7P±01
B17433
Heated Oxygen Sensor
(Bank 2 Sensor 2) Fuel Pump
Resister
Knock Sensor 2
A/F Sensor
(Bank 1 Sensor 1) A/F Sensor
(Bank 2 Sensor 1)EVAP VSV
Combination Meter
Ignition Coil with Igniter
ECM Knock Sensor 1
Injector Throttle Body
(Throttle Position Sensor,
Throttle Control Motor)Mass Air Flow
Meter
Camshaft
Position Sensor
Crankshaft Position
SensorHeated Oxygen Sensor
(Bank 2 Sensor 2)
Park/Neutral Position
Switch DLC3
Air Injection Driver
(AID)
Accelerator Pedal Assembly
(Accelerator Pedal Position
Sensor)
Fuel Pump
VVT Sensor (Bank 2)
VVT Sensor (Bank 1) OCV (Bank 2)
OCV (Bank 1) Air Pump
Air Switching Valve No.2
(ASV No.2) (Bank 1)
Air Switching Valve
(ASV) Air Switching Valve No.2
(ASV No.2) (Bank 2)
VSV for Air Injection
Contorl (Bank 1)
VSV for Air Injection
Contorl (Bank 2)ACIS VSVCharcoal Canister Assembly
± DIAGNOSTICSENGINE
DI±5
199 Author: Date:
2005 SEQUOIA (RM1146U)
LOCATION

B17430
HA1A
A1A+
A1A±
HA2A
A2A+
A2A±
HT1B
OXIB
HT2B
OX2B
E2
PRG
ACIS
AIV1
AIV2
THA
E2G
VG
E2
THW
PPMP
VPMP
MPMP#10
#20
#30
#40
#50
#60
#70
#80
IGT1
IGT2
IGT3
IGT4
IGT5
IGT6
IGT7
IGT8
IGF1
IGF2 To A/F Relay
A/F Sensor
(Bank 1 Sensor 1)
A/F Sensor
(Bank 2 Sensor 1)
HO2 Sensor
(Bank 1 Sensor 2)
HO2 Sensor
(Bank 2 Sensor 2) To EFI Relay
To EFI No.2
Fuse
VSV (EVAP)
VSV (ACIS)
VSV (AI Control)
VSV (AI Control)
Mass Air Flow
Meter
ETC Sensor
Pump Modul
Pressure
Sensor
Control
Valve To VC
TerminalTo Battery
IGN2
Fuel Injector #1
Fuel Injector #2
Fuel Injector #3
Fuel Injector #4
Fuel Injector #5
Fuel Injector #6
Fuel Injector #7
Fuel Injector #8
Ignition Coil and
Igniter No.1
Ignition Coil and
Igniter No.2
Ignition Coil and
Igniter No.3
Ignition Coil and
Igniter No.4
Ignition Coil and
Igniter No.5
Ignition Coil and
Igniter No.6
Ignition Coil and
Igniter No.7
Ignition Coil and
Igniter No.8
± DIAGNOSTICSENGINE
DI±7
201 Author: Date:
2005 SEQUOIA (RM1146U)

B17431
AIDI
AIRP
AIRV
AIP
GE01
M+
M±
VTA1
VC
VTA2
FC
FPRACCR
ST1±
STP
E01
E02
E04
E05
E1
E03
ME01
EC
EOM
TC
CANL
CANH
IMI
IMODLC3
CG
TC
CANL
CANH ASVAI Driver To EFI Relay
To Battery
To Battery
To Battery To E2
TerminalTo E2
TerminalTo IG SW
Air Pump
Pressure
Sensor
Throttle Body
C/OPN Relay
Fuel Pump Relay
Fuel Pump Resister
Fuel PumpTransponder Key
Computre Stop Light SW
To IGN1 Fuse
To EFI
RelayACC Cut Relay
To Battery DI±8
± DIAGNOSTICSENGINE
202 Author: Date:
2005 SEQUOIA (RM1146U)

DI3HJ±10
± DIAGNOSTICSENGINE
DI±33
227 Author: Date:
2005 SEQUOIA (RM1146U)
PROBLEM SYMPTOMS TABLE
SymptomSuspect AreaSee page
Engine does not crank (Does not start)
22.Starter
23.Starter relay
24.Park/neutral position switchST±15
ST±17
DI±576
No initial combustion (Does not start)
1. ECM power source circuit
2. Fuel pump control circuit
3. Engine control module (ECM)DI±493
DI±509
IN±35
No complete combustion (Does not start)1. Fuel pump control circuitDI±509
Engine cranks normally but difficult to start
1. Starter signal circuit
2. Fuel pump control circuit
3. CompressionDI±298
DI±509
EM±3
Difficult to start with cold engine1. Starter signal circuit
2. Fuel pump control circuitDI±298
DI±509
Difficult to start with hot engine1. Starter signal circuit
2. Fuel pump control circuitDI±298
DI±509
High engine idle speed (Poor idling)1. A/C switch circuit
2. ECM power source circuit±
DI±493
Low engine idle speed (Poor idling)1. A/C switch circuit
2. Fuel pump control circuit±
DI±509
Rough idling (Poor idling)1. Compression
2. Fuel pump control circuitEM±3
DI±509
Hunting (Poor idling)1. ECM power source circuit
2. Fuel pump control circuitDI±493
DI±509
Hesitation/Poor acceleration (Poor driveability)1. Fuel pump control circuit
2. A/T faultyDI±509
±
Surging (Poor driveability)1. Fuel pump control circuitDI±509
Engine stalls soon after starting1. Fuel pump control circuitDI±509
Engine stalls during A/C operation1. A/C switch circuit
2. Engine control module (ECM)±
IN±35
Unable to refuel/Difficult to refuel1. ORVR system±

A2364720 msec./DIV 20 V/DIV
Ground
DI±36
± DIAGNOSTICSENGINE
230 Author: Date:
2005 SEQUOIA (RM1146U) OX2B (E7±33) ± E2 (E8±28)
R ± G±WIdlingPulse generation
(See waveform 10)
STP (E4 15) E1 (E6 1)GY BRBrake pedal is depressed7.5 to 14 VSTP (E4±15) ± E1 (E6±1)G±Y ± BRBrake pedal is releasedBelow 1.5 V
ST1 (E4 16) E1 (E6 1)LB BRBrake pedal is depressedBelow 1.5 VST1± (E4±16) ± E1 (E6±1)L±B ± BRBrake pedal is released7.5 to 14 V
STA (E6±11) ± E1 (E6±1)B±R ± BRShift lever position P or N, Ignition switch START6.0 V or more
STSW (E6±12) ± E1 (E6±1)B ± BRShift lever position P or N, ignition switch START6.0 V or more
STAR/NSW (E7 8) E1 (E6 1)BBRIG switch ON, Other shift position in P, N9 to 14 VSTAR/NSW (E7±8) ± E1 (E6±1)B ± BRIG switch ON, Shift position in P, N0 to 3.0 V
W (E5 30) E1 (E6 1)VW BRIdling9 to 14 VW (E5±30) ± E1 (E6±1)V±W ± BRIG switch ONBelow 3.0 V
TACH (E5±1) ± E1 (E6±1)Y±G ± BRIdlingPulse generation
(See waveform 11)
ACIS (E8±33) ± E1 (E6±1)B±L ± BRIG switch ON9 to 14 V
VPMP (E4±5) ± E1 (E6±1)P±L ± BRIgnition switch ON9 V to 14 V
MPMP (E4±6) ± E1 (E6±1)V±G ± BR
Vacuum pump OFF

Vacuum pump ON0 V to 3 V
9 V to 14 V
PPMP (E4±22) ± E1 (E6±1)R±G ± BRIgnition switch ON3 V to 3.6 V
AIV1 (E8±27) ± E1 (E6±1)L±B ± BRIgnition switch ON9 to 14 V
AIV2 (E8±26) ± E1 (E6±1)P±L ± BRIgnition switch ON9 to 14 V
AIRV (E4±4) ± E1 (E6±1)R±W ± BRIgnition switch ON9 to 14 V
AIRP (E4±25) ± E1 (E6±1)G±W ± BRIgnition switch ON9 to 14 V
AIP (E8±32) ± E1 (E6±1)B±Y ± BRIgnition switch ON3 V to 3.6 V
*1: The ECM terminal voltage is constant regardless of the output voltage from the sensor.
WAVEFORM 1
Fuel injector
ECM Terminal NamesBetween #10 (to 40) and E01
Tester Ranges20 V/DIV, 20 msec./DIV
ConditionsIdling
HINT:
The wavelength becomes shorter as the engine rpm increases.