2001 NISSAN ALMERA TINO service

SMT939D
BACK-UP LAMP SWITCH AND PNP SWITCHNLMT0036S03—RS5F50A—NLMT0036S0301+Check continuity.
Gear position Continuity
Reverse 1 - 3
Neutral 2 - 4
Except reverse and neutral No
ON-VEHICLE SERVICE
Position Switch Check (Cont’d)
MT-17

General SpecificationsNLMT0076TRANSAXLENLMT0076S01
Applied modelQG18DE
Model code number8E009 8E069
Transaxle modelRS5F70A
Number of speeds5
Synchromesh typeWarner
Shift pattern
Gear ratio 1st3.333
2nd1.955
3rd1.286
4th0.926
5th0.733
Reverse 3.214
Number of teeth Input gear 1st 15
2nd 22
3rd 28
4th 41
5th 45
Rev. 14
Main gear 1st 50
2nd 43
3rd 36
4th 38
5th 33
Rev. 45
Reverse idler gear 37
Oil capacity!(Imp pt)3.0 (5-1/4)
Oil level (Reference data) mm (in) 56.5 - 61.0 (2.224 - 2.402)
Remarks1st & 2nd double baulk ring type synchronizer
Reverse sub-gear
FINAL GEARNLMT0076S02
EngineQG18DE
Transaxle modelRS5F70A
Final gear ratio4.437
Number of teethFinal gear/Pinion 71/16
Side gear/Pinion mate gear 14/10
SERVICE DATA AND SPECIFICATIONS (SDS)RS5F70A
General Specifications
MT-88

Gear End PlayNLMT0077Unit: mm (in)
Gear End play
1st main gear
0.18 - 0.31 (0.0071 - 0.0122) 2nd main gear
5th main gear
Reverse main gear
3rd input gear
4th input gear0.17 - 0.44 (0.0067 - 0.0173)
Clearance Coupling SleeveNLMT00941ST, 2ND, 3RD, 4TH, 5TH & REVERSE COUPLING SLEEVENLMT0094S01
Coupling sleeve Length“L”
1st & 2nd0 - 0.68 mm (0 - 0.0268 in)
3rd & 4th0 - 0.95 mm (0 - 0.0374 in)
5th & Reverse 0 - 0.89 mm (0 - 0.0350 in)
Clearance Between Baulk Ring and GearNLMT00783RD, 4TH, 5TH, REVERSE BAULK RINGNLMT0078S01Unit: mm (in)
Standard Wear limit
3rd
0.90 - 1.45 (0.0354 - 0.0571)
0.7 (0.028) 4th
5th
Reverse 0.9 - 1.35 (0.0354 - 0.0531)
1ST AND 2ND DOUBLE BAULK RINGNLMT0078S02Unit: mm (in)
SMT906D
Dimension Standard Wear limit
A 0.6 - 0.8 (0.024 - 0.031)
0.2 (0.008)
B 0.6 - 1.1 (0.024 - 0.043)
SERVICE DATA AND SPECIFICATIONS (SDS)RS5F70A
Gear End Play
MT-89

Available Snap RingsNLMT0079SNAP RINGNLMT0079S01
End play0.05 - 0.25 mm (0.0020 - 0.0098 in)
Thickness mm (in) Part number*
1.45 (0.0571) 32204-6J000
1.55 (0.0610) 32204-6J001
1.65 (0.0650) 32204-6J002
1.75 (0.0689) 32204-6J003
1.85 (0.0728) 32204-6J004
*: Always check with the parts department for the latest information.
Available C-ringsNLMT00804TH INPUT GEAR C-RINGNLMT0080S01
End play0 - 0.06 mm (0 - 0.0024 in)
Thickness mm (in) Part number*
3.00 (0.1181) 32205-6J000
3.03 (0.1193) 32205-6J001
3.06 (0.1205) 32205-6J002
3.09 (0.1217) 32205-6J003
3.12 (0.1228) 32205-6J004
*: Always check with the parts department for the latest information.
5TH INPUT GEAR REAR C-RINGNLMT0080S02
End play0 - 0.06 mm (0 - 0.0024 in)
Thickness mm (in) Part number*
2.59 (0.1020) 32205-6J005
2.62 (0.1031) 32205-6J006
2.65 (0.1043) 32205-6J007
2.68 (0.1055) 32205-6J008
2.71 (0.1067) 32205-6J009
2.74 (0.1079) 32205-6J010
*: Always check with the parts department for the latest information.
SERVICE DATA AND SPECIFICATIONS (SDS)RS5F70A
Available Snap Rings
MT-90

MAINSHAFT C-RINGNLMT0080S03
End play0 - 0.06 mm (0 - 0.0024 in)
Thickness mm (in) Part number*
3.48 (0.1370) 32348-6J000
3.51 (0.1382) 32348-6J001
3.54 (0.1394) 32348-6J002
3.57 (0.1406) 32348-6J003
3.60 (0.1417) 32348-6J004
3.63 (0.1429) 32348-6J005
3.66 (0.1441) 32348-6J006
3.69 (0.1453) 32348-6J007
3.72 (0.1465) 32348-6J008
3.75 (0.1476) 32348-6J009
3.78 (0.1488) 32348-6J010
3.81 (0.1500) 32348-6J011
3.84 (0.1512) 32348-6J012
3.87 (0.1524) 32348-6J013
3.90 (0.1535) 32348-6J014
3.93 (0.1547) 32348-6J015
3.96 (0.1559) 32348-6J016
*: Always check with the parts department for the latest information.
SERVICE DATA AND SPECIFICATIONS (SDS)RS5F70A
Available C-rings (Cont’d)
MT-91

Available Adjusting ShimsNLMT0081INPUT SHAFT REAR BEARING ADJUSTING SHIMNLMT0081S01
End play0 - 0.06 mm (0 - 0.0024 in)
Thickness mm (in) Part number*
0.74 (0.0291) 32225-6J003
0.78 (0.0307) 32225-6J004
0.82 (0.0323) 32225-6J005
0.86 (0.0339) 32225-6J006
0.90 (0.0354) 32225-6J007
0.94 (0.0370) 32225-6J008
0.98 (0.0386) 32225-6J009
1.02 (0.0402) 32225-6J010
1.06 (0.0417) 32225-6J011
1.10 (0.0433) 32225-6J012
1.14 (0.0449) 32225-6J013
1.18 (0.0465) 32225-6J014
1.22 (0.0480) 32225-6J015
1.26 (0.0496) 32225-6J016
1.30 (0.0512) 32225-6J017
1.34 (0.0528) 32225-6J018
1.38 (0.0543) 32225-6J019
1.42 (0.0559) 32225-6J020
1.46 (0.0575) 32225-6J021
1.50 (0.0591) 32225-6J022
1.54 (0.0606) 32225-6J023
1.58 (0.0622) 32225-6J024
1.62 (0.0638) 32225-6J060
1.66 (0.0654) 32225-6J061
*: Always check with the parts department for the latest information.
SERVICE DATA AND SPECIFICATIONS (SDS)RS5F70A
Available Adjusting Shims
MT-92

MAINSHAFT ADJUSTING SHIMNLMT0081S02
SMT907D
Standard length“L”151.35 - 151.45 mm (5.9586 - 5.9626 in)
Thickness mm (in) Part number*
0.48 (0.0189) 32238-6J000
0.56 (0.0220) 32238-6J001
0.64 (0.0252) 32238-6J002
0.72 (0.0283) 32238-6J003
0.80 (0.0315) 32238-6J004
0.88 (0.0346) 32238-6J005
*: Always check with the parts department for the latest information.
MAINSHAFT REAR BEARING ADJUSTING SHIMNLMT0081S03
End play0 - 0.06 mm (0 - 0.0024 in)
Thickness mm (in) Part number*
2.99 (0.1177) 32238-6J010
3.03 (0.1193) 32238-6J011
3.07 (0.1209) 32238-6J012
3.11 (0.1224) 32238-6J013
3.15 (0.1240) 32238-6J014
3.19 (0.1256) 32238-6J015
3.23 (0.1272) 32238-6J016
3.27 (0.1287) 32238-6J017
3.31 (0.1303) 32238-6J018
3.35 (0.1319) 32238-6J019
3.39 (0.1335) 32238-6J020
3.43 (0.1350) 32238-6J021
3.47 (0.1366) 32238-6J022
3.51 (0.1382) 32238-6J023
*: Always check with the parts department for the latest information.
SERVICE DATA AND SPECIFICATIONS (SDS)RS5F70A
Available Adjusting Shims (Cont’d)
MT-93

Available Thrust WasherNLMT0082MAINSHAFT THRUST WASHERNLMT0082S01
SMT843D
Standard length“M”244.20 - 244.30 mm (9.6142 - 9.6181 in)
Thickness mm (in) Part number*
6.04 (0.2378) 32246-6J000
6.12 (0.2409) 32246-6J001
6.20 (0.2441) 32246-6J002
6.28 (0.2472) 32246-6J003
6.36 (0.2504) 32246-6J004
*: Always check with the parts department for the latest information.
Available WashersNLMT0083DIFFERENTIAL SIDE GEAR THRUST WASHERNLMT0083S01
Clearance between side gear and differential case 0.1 - 0.2 mm (0.004 - 0.008 in)
Thickness mm (in) Part number*
0.75 - 0.80 (0.0295 - 0.0315) 38424-D2111
0.80 - 0.85 (0.0315 - 0.0335) 38424-D2112
0.85 - 0.90 (0.0335 - 0.0354) 38424-D2113
0.90 - 0.95 (0.0354 - 0.0374) 38424-D2114
0.95 - 1.00 (0.0374 - 0.0394) 38424-D2115
*: Always check with the parts department for the latest information.
SERVICE DATA AND SPECIFICATIONS (SDS)RS5F70A
Available Thrust Washer
MT-94