2001 LAND ROVER FREELANDER ECU

SEATS
76-5-8 REPAIRS
9.Remove cover and pad from frame.
10.Remove and discard 13 hog rings and remove
cover from pad.
Refit
1.Position cushion cover to pad and secure with
hog rings.
2.Fit cover to pad.
3.Position and secure cushion cover and pad to
frame.
4.Fit cushion to squab and tighten Torx bolts to
28 Nm (21 lbf.ft).
5.Position back board and secure to frame.
6.Fit end covers and tighten screws.
7.Position rear seat console and secure with
screws.
8.Position console cover and secure with screws.
9.Fit rear seat.

+ SEATS, REPAIRS, Cushion & squab
- rear seat - bench type - 3 door.
Finisher - seat base - front - each
$% 78.55.01
Remove
1.Remove front seat cushion side finisher.

+ SEATS, REPAIRS, Finisher -
cushion side - front seat.
2.Release cover to access Torx screw under
front seat and remove Torx screw.
3.Remove 2 Torx screws securing finisher to seat
runner.
4.Remove finisher.
Refit
1.Position finisher to seat runner.
2.Fit and tighten Torx screws.
3.Fit and tighten Torx screw under front seat and
close cover.
4.Fit front seat cushion side finisher.

+ SEATS, REPAIRS, Finisher -
cushion side - front seat.

SEATS
REPAIRS 76-5-9
Finisher - cushion side - front seat
$% 78.55.06
Remove
1.Remove 2 covers to access screws.
2.Remove 3 screws securing finisher.
3.Release clips at front and side of seat and
remove finisher.
Refit
1.Fit finisher to seat and secure with clips and
screws.
2.Fit screw covers.
Manual mechanism - lumbar support -
front seat
$% 78.60.07
Remove
1.Remove front seat.

+ SEATS, REPAIRS, Front seat.
2.Release and remove head restraint.
3.Remove recline control knob.
4.Release retaining studs from side covers and
remove covers.
5.Remove 4 Torx bolts from squab frame and
remove squab frame from cushion frame.
6.Remove lumbar control knob.
7.Release squab cover at base of seat frame.

SEATS
76-5-10 REPAIRS
8.Release squab cover from squab frame and
squab pad.
9.Drill out 2 pop rivets from squab frame.
10.Remove both head restraint guide tubes.
11.Remove squab cover and pad from frame.12.Remove 2 bolts from cable control and release
cable control.
13.Release 8 lumbar support retainers from squab
frame and collect 4 hook retainers.
14.Remove lumbar support mechanism.
Refit
1.Position lumbar support to squab frame and
locate hook retainers
2.Fit lumbar support retainers to squab frame.
3.Position cable control and tighten bolts.
4.Fit squab cover and pad to frame.
5.Fit head restraint guide tubes.
6.Position straps and secure with pop rivets.
7.Fit squab cover to squab pad and squab frame.
8.Secure squab cover at base of squab frame.
9.Fit lumbar support control knob.
10.Fit squab frame to cushion frame and tighten
Torx bolts to 45 Nm (33 lbf.ft).
11.Fit side covers and secure retaining studs.
12.Fit head restraint.
13.Fit recline control knob.
14.Fit front seat.

+ SEATS, REPAIRS, Front seat.

SEATS
76-5-12 REPAIRS
Cover - squab - front seat
$% 78.90.08
Remove
1.Remove front seat.

+ SEATS, REPAIRS, Front seat.
2.Release and remove head restraint.
3.Remove recline control knob.
4.Release retaining studs from side covers and
remove covers.
5.Remove 4 Torx bolts from squab frame and
remove squab frame from cushion frame.
6.Remove lumbar control knob.
7.Release squab cover at base of seat frame.8.Release squab cover from squab frame and
squab pad.
9.Drill out 2 pop rivets from squab frame.
10.Remove both head restraint guide tubes.
11.Remove squab cover and pad from frame.
12.Remove and discard 10 hog rings holding
cover to squab pad.
13.Remove squab cover.
Refit
1.Position squab cover to pad.
2.Pull cover into position and secure with NEW
hog rings.
3.Fit squab cover and pad to frame.
4.Fit head restraint guide tubes.
5.Position straps and secure with pop rivets.
6.Fit squab cover to squab pad and squab frame.
7.Secure squab cover at base of squab frame.
8.Fit lumbar support control knob.
9.Fit squab frame to cushion frame and tighten
Torx bolts to 45 Nm (33 lbf.ft).
10.Fit side covers and secure retaining studs.
11.Fit recline control knob.
12.Fit head restraint.
13.Fit front seat.

+ SEATS, REPAIRS, Front seat.

SEATS
REPAIRS 76-5-13
Cover - squab - rear seat - side - LH
$% 78.90.12
Remove
1.Fold LH rear seat forward.
2.Remove 5 screws and remove both end
covers.
3.Remove 3 bolts from seat squab and remove
squab from cushion.
4.Remove head restraint5.Release squab cover from sides and bottom of
frame.
6.Release latch escutcheon and remove seat
frame back cloth.
7.Release cover from rear of frame.
8.Remove both head restraint guide tubes.
9.Remove squab cover and pad from frame.
10.Remove and discard 9 hog rings and remove
cover from pad.
Refit
1.Position latch escutcheon to back cloth and fit
to frame. Ensure that the latch escutcheon is
secured correctly into latch housing.
2.Position squab cover to pad and secure hog
rings.
3.Fit squab cover and pad to frame.
4.Fit head restraint guide tubes.
5.Fit cover to sides and bottom of frame.
6.Fit cover to rear of frame.
7.Fit head restraint.
8.Fit cushion to squab and tighten Torx bolts to
28 Nm (21 lbf.ft).
9.Fit side covers and tighten screws.
10.Secure rear seat in locked position.

SEATS
76-5-16 REPAIRS
15.Remove and discard 12 hog rings and remove
cover from pad.
Refit
1.Position squab cover to pad and secure hog
rings.
2.Fit squab cover and pad to frame.
3.Fit head restraint guide tubes and seat lock
warning button escutcheon.
4.Fit cover to sides and bottom of frame.
5.Fit cover to rear of frame and seat belt aperture.
6.Position latch escutcheon to back cloth and fit
to frame. Ensure that the latch escutcheon is
secured correctly into latch housing.
7.Fit cover to arm rest aperture.
8.Fit arm rest and tighten screws.
9.Fit arm rest aperture trim.
10.Fit head restraints.
11.Fit cushion to squab and tighten Torx bolts.
12.Fit side covers and tighten screws.
13.Position seat belt reel in seat squab and tighten
nut to 32 Nm (24 lbf.ft).
14.Fit seat belt reel cover and tighten screws.
15.Secure rear seat in locked position.
Cover - squab - rear single seat - 3 door
$% 78.90.85
Remove
1.Remove rear seat assembly.

+ SEATS, REPAIRS, Cushion & squab
- rear seat - bench type - 3 door.
2.Remove 2 screws securing console cover and
remove cover.
3.Remove 4 screws and remove rear seat centre
console.
4.Remove 4 screws securing end covers and
remove covers.
5.Remove 4 Torx bolts and remove squab
assembly from cushion assembly.

SEATS
76-5-18 REPAIRS
14.Release cover from pad, remove and discard 5
hog rings.
15.Remove cover from pad.Refit
1.Position cushion cover to pad and secure with
hog rings.
2.Fit cover to pad.
3.Secure cover to top of frame.
4.Fit guide tubes.
5.Secure sides and bottom of cover to frame.
6.Fit head restraint.
7.Fit cushion to squab and tighten Torx bolts to
28 Nm (21 lbf.ft).
8.Position back board and secure to frame.
9.Fit end covers and tighten screws.
10.Position rear seat console and secure with
screws.
11.Position console cover and secure with screws.
12.Fit rear seat.

+ SEATS, REPAIRS, Cushion & squab
- rear seat - bench type - 3 door.

SUNROOF
REPAIRS 76-6-1
SUNROOF REPAIRS
Sun/sliding roof - complete - front - 3
door
$% 76.83.01
Remove
1.Remove headlining.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Headlining - 3 door.
WARNING: Wear protective gloves when
handling glass, solvents and primers.
2.Remove and discard cable ties from drain
tubes.
3.Disconnect drain tubes from sun roof.
4.Remove 4 Torx screws securing clamping
plates and remove plates.5.Remove glass panels and 'T' bar.
6.Remove 8 screws securing wind deflectors and
remove wind deflectors.
7.Remove sun roof tray seal.

+ SUNROOF, REPAIRS, Seal - tray -
sun /sliding roof - front.
8.Mask up roof and sun roof aperture.
9.Cover interior of vehicle with protective sheet.
10.Make a cut through the sealer at the back of the
sun roof, a 90° bend in the cutting tool will help.
WARNING: Wear suitable eye protection
when removing and refitting glass.