2001 LAND ROVER FREELANDER ECU

INTERIOR TRIM COMPONENTS
76-3-12 REPAIRS
Console - rear
$% 76.25.04
Remove
1.Release rear ash tray panel from rear console,
disconnect multiplug from power socket and
remove panel.
2.Remove oddments tray liner, raise cubby box
lid and remove cubby box.3.Remove 2 screws securing rear of console.
4.Remove screw cover and remove 2 screws
securing front of console.
5.Disconnect multiplugs from window lift switches
and if fitted, rear window isolator switch.

INTERIOR TRIM COMPONENTS
REPAIRS 76-3-13
6.Release clip securing harness to centre
console.
7.Remove rear console.
8.Remove switches from rear console.
Refit
1.Fit switches to console.
2.Position rear console and connect multiplugs.
3.Fit harness clip to centre console.
4.Align console, fit screws and screw cover.
5.Fit cubby box and oddments tray mat.
6.Position rear ash tray panel, connect multiplug
and secure ash tray panel to console.
Cup holder - fascia - from 04MY
$% 76.46.09
Remove
1.Remove screw securing fascia cup holder,
release 5 clips and remove cup holder.
Refit
1.Fit cup holder to fascia and secure with screw.

INTERIOR TRIM COMPONENTS
REPAIRS 76-3-15
13.Disconnect 2 main harness to fascia harness
multiplugs.
14.Remove 12 bolts securing fascia.
15.With assistance remove fascia.
16.Remove 4 screws, disconnect 3 multiplugs
from switches, and remove instrument bezel
finisher.17.Remove 2 screws from instrument upper cover
and remove cover.
18.Disconnect 3 multiplugs from instrument pack.
19.Release mirror and headlamp levelling
switches.
20.Disconnect multiplugs from mirror switch and
headlamp levelling switch.

INTERIOR TRIM COMPONENTS
REPAIRS 76-3-17
26. Models without passenger airbag: Remove 4
nuts from grab handle and remove handle.
27.Remove 4 screws from centre bracket and
remove bracket.28.Remove 4 face level vents and collect seals.
29.Remove glove box hinge pins and remove
glove box lids.
30.Remove glove box lamp and mat.
31.Remove 4 screws from glove box and remove
glove box.
32.Remove 2 screws from each glove box lock and
remove locks.
33.Remove switch blank.
34.Disconnect multiplug from immobilisation ECU.
35.Remove 2 nuts securing immobilisation ECU to
fascia and remove ECU.
36.Remove fascia and coin tray mats.
M76 3995

INTERIOR TRIM COMPONENTS
76-3-18 REPAIRS
Refit
1.Fit fascia and coin tray mats.
2.Fit immobilisation ECU to fascia and secure
with nuts.
3.Connect multiplug to immobilisation ECU.
4.Fit switch blank.
5.Fit glove box locks to fascia and secure with
screws.
6.Fit glove box and secure with screws.
7.Fit glove box lamp and mat.
8.Fit glove box lids and secure hinge pins.
9.Fit face level vents and seals to fascia.
10.Fit centre bracket and secure with screws.
11. Models without passenger airbag: Fit grab
handle and secure with nuts.
12.Fit instrument pack lower cover and secure with
screws.
13.Fit instrument pack to fascia and secure with
screws.
14.Fit fascia harness to fascia and secure with
clips.
15.Connect Lucars to glove box lamp and switch.
16.Connect multiplugs to mirror switch and
headlamp levelling switch.
17.Fit mirror switch and headlamp levelling switch.
18.Connect multiplugs to instrument pack.
19.Fit instrument pack upper cover and secure
with screws.
20.Connect multiplugs to switches on instrument
bezel finisher, fit bezel and secure with screws.
21.With assistance fit fascia to vehicle and secure
with bolts.22.Connect fascia harness multiplugs to main
harness.
23. Models with passenger airbag: Fit passenger
airbag.

+ RESTRAINT SYSTEMS, REPAIRS,
Air bag - fascia - passenger - up to 04MY.
24. Models without passenger airbag: Fit fascia
stowage box.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Stowage box - fascia.
25.Fit 'A' post upper trim finishers.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim finisher - 'A' post - upper -
renew.
26.Fit clock.

+ INSTRUMENTS, REPAIRS, Clock.
27.Open drivers glove box lid and remove fuse box
cover.
28.Connect multiplugs to fusebox.
29.Fit fusebox cover and close glove box lid.
30.Fit steering column lower cover and secure with
screws.
31.Fit wiper/indicator switch and tighten clamping
screw.
32.Connect multiplugs to wiper/indicator switch.
33.Fit rotary coupler.

+ RESTRAINT SYSTEMS, REPAIRS,
Rotary coupler - (SRS) air bag system.
34.Fit front console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.

INTERIOR TRIM COMPONENTS
REPAIRS 76-3-19
Fascia - from 04MY
$% 76.46.23
Remove
1.Remove instrument pack.

+ INSTRUMENTS, REPAIRS,
Instrument panel - from 04MY.
2.Remove the Radio/CD module.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio/CD - from 04MY.
3.Remove 4 screws securing heater controls to
centre console.
4.Remove rotary coupler.

+ RESTRAINT SYSTEMS, REPAIRS,
Rotary coupler - (SRS) air bag system.
5.Disconnect 4 multiplugs from wiper/indicator
switch.6.Loosen clamping screw and remove wiper/
indicator switch.
7.Remove 2 screws from steering column lower
finisher and remove finisher.
8.Open drivers glove box lid and remove fuse box
cover.
9.

INTERIOR TRIM COMPONENTS
76-3-20 REPAIRS
10.Disconnect 2 multiplugs from fuse box.
11.Close glove box.
12.Remove clock.

+ INSTRUMENTS, REPAIRS, Clock.
13.Remove hazard warning switch.

+ DRIVER CONTROLS, REPAIRS,
Switch - hazard warning - from 04MY.
14.Remove both 'A' post upper trim finishers.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim finisher - 'A' post - upper -
renew.
15.Remove passenger airbag.

+ RESTRAINT SYSTEMS, REPAIRS,
Air bag - fascia - passenger - from 04MY.
16.Disconnect 2 multiplugs from fascia harness.17.Remove 14 bolts securing fascia.
18.With assistance remove fascia.
NOTE: Do not carry out further dismantling if
component is removed for access only.
19.Disconnect 4 multiplugs from fascia switch
assembly.
20.Remove 4 switches from fascia switch carrier.
M76 4722
M76 4714

INTERIOR TRIM COMPONENTS
REPAIRS 76-3-21
21.Release mirror switch from fascia and
disconnect multiplug, remove switch assembly.
22.Remove passenger glove box internal finisher
and remove 4 screws securing liner.
23.Release glove box liner and release lamp
assembly.
24.Remove passenger side glove box liner
assembly.25.Remove glove box hinge pins and remove
glove box lids.
26.Remove cruise control switch carrier assembly
from fascia.

+ FUEL DELIVERY SYSTEM -
PETROL, REPAIRS, Switch - engagement
(on/off) - from 04MY.
27.Carefully release and remove 4 face level
fascia air vents.
28.Remove 2 screws securing drivers side glove
box striker plate assembly and collect striker.