2001 LAND ROVER FREELANDER oil pressure

CONTENTS
CONTENTS 5
ENGINE - K SERIES KV6 ......................................................................... 12-3-1
ADJUSTMENTS
Engine oil pressure check ............................................................................................................... 12-3-1
REPAIRS
Camshafts - LH cylinder head......................................................................................................... 12-3-3
Camshafts - RH cylinder head ........................................................................................................ 12-3-5
Inlet camshaft front oil seal ............................................................................................................. 12-3-8
Camshaft rear oil seal ..................................................................................................................... 12-3-9
Pulley - crankshaft ......................................................................................................................... 12-3-10
Crankshaft front oil seal .................................................................................................................. 12-3-11
Crankshaft rear oil seal ................................................................................................................... 12-3-12
Cylinder head gasket - LH .............................................................................................................. 12-3-13
Cylinder head gasket - RH .............................................................................................................. 12-3-16
Camshaft cover gasket - LH - Up to 03MY ..................................................................................... 12-3-20
Camshaft cover gasket - LH - from 03MY ....................................................................................... 12-3-21
Camshaft cover gasket - RH ........................................................................................................... 12-3-23
Cover - engine acoustic ................................................................................................................. 12-3-25
Engine and automatic gearbox - up to 03MY .................................................................................. 12-3-25
Engine and automatic gearbox - from 03MY .................................................................................. 12-3-35
Arm assembly - engine mounting RH ........................................................................................... 12-3-45
Engine mounting - LH ..................................................................................................................... 12-3-46
Hydramount - engine - RH ............................................................................................................. 12-3-47
Engine steady - upper RH ............................................................................................................... 12-3-47
Engine steady - lower ..................................................................................................................... 12-3-48
Torque converter drive plate ........................................................................................................... 12-3-49
Filter - engine oil ............................................................................................................................ 12-3-50
Oil pick-up strainer .......................................................................................................................... 12-3-50
Gasket - oil pump ........................................................................................................................... 12-3-51
Sump - reseal.................................................................................................................................. 12-3-53
Switch - oil pressure ....................................................................................................................... 12-3-54
Oil pressure relief valve .................................................................................................................. 12-3-55
Oil cooler - engine ........................................................................................................................... 12-3-57
Camshaft timing belt ....................................................................................................................... 12-3-58
Camshaft timing belt cover - RH front ............................................................................................. 12-3-66
Camshaft timing belt cover - LH front ............................................................................................. 12-3-67
Camshaft timing belt cover - LH rear .............................................................................................. 12-3-68
Camshaft timing belt cover - RH rear .............................................................................................. 12-3-68
Camshaft rear timing belt - LH cylinder head .................................................................................. 12-3-69
Camshaft rear timing belt - RH cylinder head ................................................................................. 12-3-73
OVERHAUL
Piston assemblies - engine set ....................................................................................................... 12-3-77
Crankshaft front oil seal ................................................................................................................ 12-3-80
Crankshaft rear oil seal ................................................................................................................... 12-3-81
Crankshaft....................................................................................................................................... 12-3-82
Cylinder head gasket - LH .............................................................................................................. 12-3-87
Cylinder head gasket - RH .............................................................................................................. 12-3-91
Cylinder head - decarbonise ........................................................................................................... 12-3-94
Oil pump - Overhaul ........................................................................................................................ 12-3-104
Sump - engine oil ........................................................................................................................... 12-3-106
Camshaft timing belt ....................................................................................................................... 12-3-107

CONTENTS
6CONTENTS
EMISSION CONTROL ............................................................................. 17-1-1
ADJUSTMENTS
Evaporative loss control system (EVAPS) - leak test - NAS........................................................... 17-1-1
REPAIRS
Valve - depression limiter - Td4 ..................................................................................................... 17-1-3
Solenoid - canister purge - KV6 ...................................................................................................... 17-1-4
Charcoal canister - petrol - Non NAS ............................................................................................. 17-1-4
Charcoal canister - NAS ................................................................................................................. 17-1-5
Valve - canister purge - K1.8 .......................................................................................................... 17-1-6
Valve - EGR - Td4 .......................................................................................................................... 17-1-7
Solenoid/modulator valve - EGR - Td4 ........................................................................................... 17-1-8
Thermal valve - exhaust gas recirculation (EGR) -
Td4 Automatic transmission (hot climates) - from 03 MY ............................................................... 17-1-9
Cooler - EGR - Td4 ......................................................................................................................... 17-1-9
Module - tank leakage diagnostic (DMTL) ...................................................................................... 17-1-11
Filter - fuel leak detection pump - KV6 - NAS ................................................................................ 17-1-12
Catalytic converter - RH - KV6 - NAS ............................................................................................ 17-1-12
ENGINE MANAGEMENT SYSTEM - SIEMENS....................................... 18-3-1
REPAIRS
Spark plugs - up to 03MY ............................................................................................................... 18-3-1
Spark plugs - from 03MY ................................................................................................................ 18-3-2
Coil - each - LH bank - up to 03MY ................................................................................................ 18-3-3
Coil - each - LH bank - from 03MY ................................................................................................. 18-3-3
Coil - each - RH bank - up to 03MY ................................................................................................ 18-3-4
Coil - each - RH bank - from 03MY................................................................................................. 18-3-4
Engine control module (ECM) - Non NAS ..................................................................................... 18-3-5
Engine control module (ECM) - fuel - NAS .................................................................................... 18-3-6
Idle Air Control Valve (IACV) ......................................................................................................... 18-3-7
Sensor - intake air temperature (IAT) - NAS .................................................................................. 18-3-8
Sensor - engine coolant temperature (ECT) .................................................................................. 18-3-8
Sensor - crankshaft position (CKP) ............................................................................................... 18-3-9
Sensor - throttle position (TP) ......................................................................................................... 18-3-10
Sensor - thermostat monitoring (TM) - KV6 - NAS ........................................................................ 18-3-11
Sensor - camshaft position (CMP) ................................................................................................. 18-3-12
Sensor - knock (KS) ....................................................................................................................... 18-3-13
Switch - throttle pedal - Non NAS ................................................................................................... 18-3-13
Sensor - combined - manifold absolute pressure/Intake air temperature (MAP/IAT) ..................... 18-3-14
Sensor - throttle position (TP) - NAS - up to 03MY......................................................................... 18-3-15
Sensor - throttle position (TP) - NAS - from 03MY ......................................................................... 18-3-16

CONTENTS
10 CONTENTS
REAR AXLE & FINAL DRIVE ................................................................... 51-1
REPAIRS
Differential assembly ..................................................................................................................... 51-1
Cover - rear - differential ................................................................................................................. 51-2
Bush - differential mounting - front ................................................................................................. 51-3
Bush - differential mounting - rear ................................................................................................. 51-4
Oil seal - pinion .............................................................................................................................. 51-5
Oil seal - differential housing ......................................................................................................... 51-6
STEERING ................................................................................................ 57-1
ADJUSTMENTS
Power assisted steering (PAS) system - bleed............................................................................... 57-1
Cable - key interlock - adjust .......................................................................................................... 57-1
Front wheel alignment - check & adjust .......................................................................................... 57-2
Alignment - rear wheel - check & adjust ......................................................................................... 57-3
Power steering - pressure test ........................................................................................................ 57-4
REPAIRS
Power steering rack ........................................................................................................................ 57-5
Gaiter - PAS rack ............................................................................................................................ 57-8
Oil cooler - Td4 & K1.8 models ....................................................................................................... 57-9
Oil cooler - KV6 models .................................................................................................................. 57-10
Drive belt - K1.8 .............................................................................................................................. 57-11
Pump - steering - KV6 .................................................................................................................... 57-12
Pump - steering - K1.8 .................................................................................................................... 57-14
Pump - steering - Td4 ..................................................................................................................... 57-15
Nacelle - column ............................................................................................................................. 57-16
Column lock & ignition/starter switch assembly .............................................................................. 57-17
Cable - key interlock ....................................................................................................................... 57-18
Column assembly - inner & outer ................................................................................................... 57-19
Ball joint - track rod ......................................................................................................................... 57-23
Track rod......................................................................................................................................... 57-24
Steering wheel ................................................................................................................................ 57-25
FRONT SUSPENSION .............................................................................. 60-1
REPAIRS
Anti roll bar...................................................................................................................................... 60-1
Ball joint link - anti roll bar .............................................................................................................. 60-2
Mounting rubbers - anti roll bar - set .............................................................................................. 60-2
Bearing - hub ................................................................................................................................. 60-3
Damper .......................................................................................................................................... 60-7
Lower arm assembly ...................................................................................................................... 60-10
Rear beam ..................................................................................................................................... 60-13
Bush - lower arm - front .................................................................................................................. 60-15
Bush - lower arm - rear ................................................................................................................... 60-16

GENERAL INFORMATION
03-31
When a major repair has been completed, a leak test
should be conducted; refer to the air conditioning
section of this manual for the correct procedure.
Refrigerant oil
Use an approved refrigerant lubricating oil:
ND Oil 8
CAUTION: Do not use any other type of
refrigerant oil.
CAUTION: Refrigerant oil easily absorbs water
and must not be stored for long periods. Do not
pour unused oil back into the container.
When renewing system components, add the
quantities of refrigerant oil recommended in the Air
Conditioning section of this manual.
Compressor
A new compressor is sealed and pressurised with
Nitrogen gas. When fitting a new compressor, slowly
release the sealing cap; gas pressure should be
heard to vent as the seal is broken.
CAUTION: A new compressor should always be
sealed and could be pressurised with nitrogen
gas. To avoid possible oil loss, release the
sealing cap(s) slowly. Do not remove the cap(s)
until immediately prior to connecting the air
conditioning pipes to the compressor.
Rapid refrigerant discharge
If the air conditioning system is involved in accident
damage and the system is punctured, the refrigerant
will discharge rapidly. The rapid discharge of
refrigerant will also result in the loss of most of the
oil from the system. The compressor must be
removed and all the remaining oil in the compressor
drained and refilled in accordance with the 'Air
Conditioning Compressor Replacement Procedure'.
Air conditioning compressor
replacement
A new compressor is supplied filled with a full charge
of (X cm3) of refrigerant oil.
A new compressor is supplied with an oil fill (X cm) of
120 cm
3.
A calculated quantity of oil must be drained from the
new compressor before fitting. To calculate the
quantity of oil to be drained:
1Remove the drain plug from the old
compressor.
2Invert the compressor and gravity drain the oil
into a calibrated measuring cylinder. Rotate the
compressor clutch to ensure the compressor is
completely drained.
3Note the quantity of oil drained (Y cm
3).
4Calculate the quantity of oil to be drained from
the new compressor using the following
formula:
X cm
3 – (Y cm3 + 20 cm3) = Q cm3
5Remove the drain plug from the new
compressor and drain Q cm3 of oil.
6Fit and tighten the compressor drain plug.
System components
When renewing system components, add the
following quantities of refrigerant oil:
lCondenser = 40 cm
3
lEvaporator = 30 cm 3
lReceiver drier = 15 cm 3
lPipe or hose = 5 cm 3

GENERAL DATA
04-2
Lubrication
Type Wet aluminium die-cast sump, pressure fed
Oil filter Disposable canister with full flow by-pass
Oil cooler Integral with oil filter assembly, connected to vehicle cooling system
Oil pump:
⇒ Type Crankshaft driven, eccentric rotor
⇒ Oil flow rate 30 litres / min. (6.625 gallons/min.)
⇒ Outer rotor to body clearance 0.080 - 0.158 mm (0.0031 - 0.062 in.)
⇒ Peak pressure up to 20 bar (290 lbf.in
2)
Oil pressure at idle:
⇒ Cold - 1000 rev/min. 1.5 bar (21.8 lbf.in
2)
⇒ Operating temperature (minimum) 0.5 bar (7.3 lbf.in
2)
⇒ Regulated pressure 4.2 ±0.5 bar (60.9 ± 7.3 lbf.in
2)
⇒ Pressure at 3500 rev/min (hot) 3.0 - 4.5 bar (43.5 - 65.3 lbf.in
2)
Relief valve opening pressure 4.2 bar (60.9 lbf.in
2)
Low oil pressure switch opening pressure 0.2 - 0.5 bar (2.9 - 7.3 lbf.in
2)
Cylinder block
Type Grey cast iron with hollow beam structure
Cylinder head warp - maximum 0.03 mm (0.001 in.)
Cylinder head bore:
†
⇒ Standard 84.000 - 84.018 mm (3.3071 - 3.3078 in)
⇒⇒ Wear limit 84.040 mm (3.3087 in)
⇒ Intermediate 84.080 - 84.098 mm (3.3102 - 3.3109 in)
⇒⇒ Wear limit 84.120 mm (3.3118)
⇒ 1st.Oversize (Grinding dimension) 84.250 - 84.268 mm (3.3169 - 3.3176 in)
⇒⇒ Wear limit 84.290 mm (3.3185 in)
Cylinder bore ovality (permitted roundness deviation)
†0.01 mm (0.0004 in)
⇒ Wear limit 0.04 mm (0.0016 in)
Cylinder bore taper (permitted conicity)
†0.01 mm (0.0004 in)
⇒ Wear limit 0.04 mm (0.0016 in)
†Measurements at top centre and bottom of bore
Crankshaft
Main journal diameter 60 mm (2.36 in.)
Crankpin journal diameter 44.975 - 45.009 mm (1.7707 - 1.7720 in)
End float 0.08 - 0.163 mm (0.0031 - 0.0064 in.)
Maximum out of round
†0.15 mm (0.006 in.)
Crankshaft seal PTFE
†At centre main journal; crankshaft supported on outer bearing pins

GENERAL DATA
04-6
Engine - K1.8 Petrol
General
Type 1.8 litre petrol, 16-valve DOHC
Cylinder arrangement 4 in-line, transverse, No.1 cylinder at front of engine
Bore 80.00 mm (3.150 in.)
Stroke 89.30 mm (3.516 in.)
Capacity 1796 cm
3 (109.59 in3)
Firing order 1-3-4-2
Compression ratio 10.5 :1 ± 0.5 :1
Direction of rotation Clockwise viewed from the front of the engine
Maximum power 88 kW (118 bhp) @ 5500 rev/min.
Maximum torque 165 Nm (223.7 lbf.ft) @ 2750 rev/min.
Idle speed 775 ± 50 rev/min.
Maximum intermittent engine speed 6750 rev/min.
Weight (fully dressed, wet) 108 kg (238 lb)
Dimensions:
⇒ Length (nominal) 654 mm (25.75 in.)
⇒ Width (nominal) 600 mm (23.62 in.)
⇒ Height (nominal) 615 mm (24.21 in.)
Spark plugs:
⇒ Type NLP 100290
⇒ Gap 1.0 mm ± 0.05 mm (0.039 in. ± 0.002 in.)
Ignition coils:
⇒ Make Nippon Denso - NEC 100730
⇒ Type 2 x twin output coils, plug top mounted; cylinders 1 & 4 and 2 & 3
⇒ Primary resistance (typical) 0.7 Ω
⇒ Secondary resistance (typical) 10 Ω
Fuel injection system:
Type Returnless fuel rail, multi-point fuel injection, electronically controlled
from ECM
Controller MEMS 3 breakerless, electronic, fully mapped engine management
system
Injectors:
⇒ Operating pressure 3.5 bar (50.8 lbf.in
2)
⇒ Fuel flow rate 117 g/min. @ 3.0 bar (4.13 fl.oz/min. @ 43.5 lbf. in
2)
Valve operation Self-adjusting, lightweight hydraulic tappets operated directly by
camshafts
Emissions standard ECD3
Cylinder block:
Material Aluminium alloy
Cylinder liner type Damp, bottom half stepped - sliding fit into lower part of cylinder block
Cylinder liner bore:
⇒ RED grade A 80.000 - 80.015 mm (3.1496 - 3.1501 in.)
⇒ BLUE grade B 80.016 - 80.030 mm (3.1502 - 3.1508 in.)

GENERAL DATA
04-9
Valves
Stem diameter:
⇒ Inlet valves 5.952 - 5.967 mm (0.2343 - 0.2349 in.)
⇒ Exhaust valves 5.947 - 5.962 mm (0.2341 - 0.2347 in.)
Stem to guide clearance:
⇒ Inlet valves 0.033 - 0.063 mm (0.0013 - 0.0025 in.)
⇒⇒ Service limit 0.07 mm (0.0028 in.)
⇒ Exhaust valves 0.038 - 0.078 mm (0.0015 - 0.0031 in.)
⇒⇒ Service limit 0.11 mm (0.0043 in.)
Valve stem fitted height:
⇒ New 38.93 - 39.84 mm (1.5327 - 1.5685 in.)
⇒ Service limit 40.10 mm (1.5787 in.)
Head diameter:
⇒ Inlet valves 27.6 - 27.8 mm (1.087 - 1.094 in.)
⇒ Exhaust valves 24.0 - 24.2 mm (0.945 - 0.953 in.)
Valve seat width:
⇒ Inlet 1.0 - 1.4 mm (0.039 - 0.055 in)
⇒ Exhaust 1.4 - 1.8 mm (0.055 - 0.071 in)
Seat face angle - Inlet and Exhaust 45°
Valve face angle - Inlet and Exhaust 45°
Valve springs
Free length 50.0 mm (1.97 in.)
Fitted length 37.0 mm (1.46 in.)
Load at fitted length 250 ± 12 N
Load at valve open length 450 ± 18 N
Lubrication
Type Cast aluminium wet sump
Pump type Crankshaft driven, eccentric rotor
⇒ Outer rotor to housing clearance 0.28 - 0.36 mm (0.011 - 0.014 in.)
⇒ Inner rotor tip clearance 0.05 - 0.13 mm (0.002 - 0.005 in.)
⇒ Rotor end-float 0.02 - 0.06 mm (0.001 - 0.002 in.)
Relief valve spring free length 38.90 mm (1.531 in.)
Oil filter Full flow disposable screw-on canister
Pressure at idle (min.)
Pressure at 2500 rev/min (hot)
Relief valve opening pressure
Low oil pressure switch opening pressure100 kPa (14.5 lbf/in
2)
375 kPa (3.75 bar, 54.4 lbf/in2)
410 kPa (59.5 lbf/in2)
20 - 58 kPa (3.0 - 8.5 lbf/in2) General

GENERAL DATA
04-15
* New metal dowels supplied with gasket must be fitted
Valves
Stem diameter:
⇒ Inlet valves 5.952 - 5.967 mm (0.2343 - 0.2349 in.)
⇒ Exhaust valves 5.947 - 5.962 mm (0.2341 - 0.2347 in.)
Stem to guide clearance:
Inlet valves 0.033 - 0.063 mm (0.0013 - 0.0025 in.)
⇒ Service limit 0.07 mm (0.0028 in.)
Exhaust valves 0.038 - 0.078 mm (0.0015 - 0.0013 in.)
⇒ Service limit 0.11 mm (0.0043 in.)
Valve stem fitted height:
⇒ New 38.93 - 39.84 mm (1.533 - 1.569 in.)
⇒ Service limit 40.10 mm (1.579 in.)
Valve guide fitted height 6.0 mm (0.24 in.)
Valve guide inside diameter 6.000 - 6.025 mm (0.2362 - 0.2372 in.)
Head diameter:
⇒ Inlet valves 31.4 - 31.6 mm (1.236 - 1.244 in.)
⇒ Exhaust valves 27.3 - 27.5 mm (1.075 - 1.083 in.)
Valve seat width:
⇒ Inlet valves
⇒ Exhaust valves1.2 mm (0.05 in.)
1.6 mm (0.06 in)
Seat face angle:
⇒ Inlet valves
⇒ Exhaust valves45°
45°
Valve face angle:
⇒ Inlet valves
⇒ Exhaust valves45°
45°
Valve springs
Free length 47.6 mm (1.874 in.)
Fitted length 37.0 mm (1.457 in.)
Load at fitted length 210 ± 13 N
Load at top of lift 440 ± 22 N
Lubrication
Type Cast aluminium, wet sump with full flow filtration
Oil pump: Crankshaft driven, high pressure die cast body
⇒ Outer rotor end-float 0.04 - 0.09 mm (0.0016 - 0.0035 in.)
⇒ Inner rotor end-float 0.04 - 0.09 mm (0.0016 - 0.0035 in.)
⇒ Inner rotor tip 0.05 - 0.13 mm (0.002 - 0.005 in)
⇒ Outer rotor to body diameterical clearance
0.13 - 0.23 mm (0.0051 - 0.0091 in.)
⇒ Rotor body to drive gear clearance (pump not fitted)
0.15 - 0.25 mm (0.0059 - 0.0098 in.)
Relief valve spring free length 38.90 mm (1.531 in)
Oil filter Full-flow disposable cartridge
Oil cooler Partial flow type
Pressure at idle (min.) 1.0 bar (14.5 lbf.in
2)
Pressure at 3000 rev/min. 3.0 bar (43.5 lbf.in
2)
Relief valve opening pressure 4.1 bar (59.5 lbf.in
2)
Low oil pressure switch opening pressure 0.3 - 0.5 bar (4.4 - 7.3 lbf.in
2) General