2000 TOYOTA CAMRY headlights

CAMRY
CAMRY ± OUTLINE OF NEW FEATURES 26
OUTLINE OF NEW FEATURES
The CAMRY is a high-quality family sedan with advanced technology and sporty performance. The following
changes are made for the 2000 model year.
1. Model Line-Up
The 5S-FNE CNG (Compressed Natural Gas) engine model has been added.
2. Exterior
Four new exterior colors have been added, for a total of 10 colors.
The design of the front and rear bumpers has been changed.
The bumper and the radiator grille have been made separate, and the radiator grille is chrome-plated.
The side protection molding has been increased in size. On the XLE grade model, chrome stripes have been
adopted for the side protection molding.
The 4-light multi-reflector type headlights are adopted with new styling.
The design and styling of the rear combination light has been changed.
The 16º aluminum alloy wheel and wheel cap has been added.
The styling of the 15º full wheel cover has been changed.
3. Interior
Wood-grain panels have been adopted in the interior of the XLE grade model.
CRS tether anchor brackets have been provided on the package tray trim. (except 5S-FNE engine Model)
A clock with an outside temperature gauge has been provided on the models with manual air conditioning.
4. 5S-FE Engine
The intake system from the inlet duct to the throttle body has been improved to increase torque and reduce
noise.
The direction of the rotation of the radiator cooling fan has been reversed.
A 2-way exhaust control system has been adopted on the TMMK made model.
Along with the discontinuance of the air assist system, the fuel injectors and the IAC valve have been
changed for the California specification model, in order to meet ULEV (Ultra-Low Emission Vehicle) re-
quirement.
The system for detecting evaporative emission leaks has been changed. For details, see the General 2000
Features section.
5. 5S-FNE Engine
Based on the 5S-FE gasoline engine, the 5S-FNE engine uses compressed natural gas. The fuel lines have
been designed exclusively for compressed natural gas application.
6. 1MZ-FE Engine
The system for detecting evaporative emission leaks has been changed. For details, see the General 2000
Features section.
A diagnostic trouble code (DTC) has been added for indicating a thermostat malfunction.
7. Automatic Transaxle
The overdrive switch has been changed to the momentary type. For details, see the General 2000 Features
section.
The differential gear ratio of the A140E automatic transaxle has been changed for the 5S-FNE engine mod-
el to accommodate the performance of the 5S-FNE engine.

3
CAMRY ± OUTLINE OF NEW FEATURES27
8. Brakes
The specifications of the front and rear brakes have been changed.
9. Suspension
The front and rear springs, stabilizers, and shock absorbers have been modified to realize excellent stability,
controllability, and riding comfort.
10. Steering
A check valve has been added to the power steering gear box to help reduce kickback.
The rack stroke of the 5S-FE engine model has been changed to 145mm (5.71 in.), which is the same as
in the 1MZ-FE engine.
11. Body
Hood support dampers are used.
Two utility hooks added in the luggage room for the gasoline engine model.
To install the fuel tank in the front area of the luggage compartment, the upper back panel has been cut
out for the 5S-FNE engine model.
A performance rod that joins the tops of the right and left rear suspension strut towers has been adopted
for the 5S-FNE engine model.
The shape of the rear floor pan has been changed to prevent the luggage compartment capacity from being
reduced as a result of the installation of the fuel tank in the luggage compartment for the 5S-FNE engine
model.
12. Seat
The seat cover of the LE grade model has been changed.
Optional driver power seat added for the LE grade model.
A fixed type seat back is used for the rear seat for the 5S-FNE engine model.
13. Seat Belt
2-point NR (Non-Retractor) seat belt is used for the rear center seat for the 5S-FNE engine model.
14. Wireless Door Lock Control
Audio answer back is adopted.
15. Lighting
Along with the adoption of the 4-beam headlights, the electrical circuit of the daytime running light system
has been changed.
16. Air Conditioning
The air inlet mode selector of heater control panel has been changed from the lever type to the push button
type on the CE and LE grade model.
When the air outlet mode is set to the DEF or FOOT / DEF mode, the air inlet mode also changes to the
FRESH mode, has been also added on the CE and LE grade model.
A fully automatic controlled type air conditioning is used on the XLE grade model.
A defroster-linked air conditioning start up control has been continuing to use since the previous models
with air conditioning.
17. SRS Airbag
The inflator of the SRS airbag for the driver has been made more compact and lightweight.
A signal that causes the supply of fuel to be cut off during a frontal collision is output by the airbag sensor
assembly to the ECM for the 5S-FNE engine model.

3
CAMRY ± NEW FEATURES
172CM02
A
A
172CM03
Chrome
Plating
Radiator
Grille
Chrome
Plating
BumperIntegrated Bumper and
Radiator Grille
New Previous EmblemEmblem
172CM04
Chrome Strip
XLE Grade LE and CE Grade
New Previous31
NEW FEATURES
EXTERIOR
The design of the front and rear bumpers has been changed.
The bumper and the radiator grille have been made separate, and the radiator grille is chrome-plated.
The side protection molding has been increased in size. On the XLE grade model, chrome stripes have been
adopted for the side protection molding.
The 4-light multi-reflector type headlights are adopted with new styling.
The design and styling of the rear combination light has been changed.

Bumper and Radiator Grille (A ± A) Cross Section 


Side Protection Moulding Cross Section 

CAMRY ± NEW FEATURES
172CM08
Hood Support Dampers
Utility Hooks
172CM09
High
High Beam
Indicator Light
Low
HighLow
Daytime
Running
Light
Relay No.3
Daytime Running Light
Relay No.4
'00 Model
HighLowHighLow
Daytime Running
Light Relay No.4Daytime Running
Light Resistor
'99 Model 58
Hood support dampers are used.
Two utility hooks added in the luggage room.
LIGHTING
The 4-light multi-reflector type headlights are adopted with new styling.
Along with the adoption of the 4-beam headlights, the daytime running light system has been changed
from the '99 model type that uses resistors to dim the low beams. On the 2000 model, the daytime running
light is a type that dims the right and left high beams through a series circuit.

23
INTERIOR
 WIRELESS DOOR LOCK REMOTE CONTROL SYSTEM
A wireless door lock remote control system is available as an option on the LE grade model and is standard
equipment on the XLE grade model. With the wireless door lock remote control system, all the doors can be locked
and unlocked by signals emitted by the transmitter.
A 2±step unlock function is provided. When the unlock switch of the transmitter is pressed once, only the driver's
door is unlocked. When it is pressed twice, all the doors are unlocked.
A panic switch is provided in the transmitter to force the theft system by operating the horn, headlight and taillight.
A wireless door lock ECU with EEPROM (Electrical Erasable Programmable ROM) is used so that the transmitter
recognition code can be easily reprogrammed.
 THEFT DETERRENT SYSTEM
A theft deterrent system is used to prevent vehicle theft. When the system is set, the horn and headlights operate
if the door, hood or trunk is forcibly opened.
The audio system also has an anti±theft system whereby the radio and cassette deck is disabled if the radio body
is stolen from the vehicle.

97 BODYÐAERODYNAMICS
AERODYMANICS
To improve aerodynamic performance, the following measures have been taken.
1.A large rain gutter has been provided in the front pillar to ensure a smooth airflow from the front to the side.
2. The front edge of the hood and the area around the headlights offers a smooth shape with minimal level
differences for smooth airflow characteristics.
3.The under shape of the front bumper collcts the flow of air under the floor.
4. To ensure a smooth side airflow, the rear side corners have been provided with a sharper angle.
5.To ensure a smoooth airflow from the roof to the rear, the shape of the luggage compartment door has been
optimized.
6.The gody line from the roof to the luggage compartment allwos the air to flow smoothly from the top of the roof
to ther rear.

100BODY ELECTRICALÐLIGHTING
BODY ELECTRICAL
LIGHTING

DESCRIPTION
The new Camry has the following features:
Item
Outline
Daytime Running Light System
This system is designed to automatically activate the headlights during the
daytime to keep the car highly visible to other vehicles.
As in the previous model, the headlights are activated by reducing the nor-
mal high beam brightness.
The basic construction and operation are the same as in the previous model.
Light Auto Turn±Off System
When the ignition key is turned from the ON or ACC to LOCK position and
the driver's door is opened with the taillights and headlights turned on, this
system automatically turns them off.
The basic construction and operation are the same as in the previous model.
Light Auto Turn±Off System
This system is useful when entering the vehicle and inserting the ignition key
into the cylinder in the dark.
2 types of this system are used in the new Camry.
In the first type, when the doors are opened, this system turns on the illu-
minations around ignition key cylinder and dome light (only when the con-
trol switch is set to the DOOR position) simultaneously. These lights fade
out in about 15 seconds. However, under certain conditions such as when all
doors are locked, the lights will turn off immediately even if the system is
operating.
The basic construction and operation are the same as in the '97 Avalon.
In the second type, when the door is opened, this system turns on the illu-
minations around the ignition key cylinder. This illumination remains on for
about 5 seconds after the door is closed.

105 BODY ELECTRICALÐACCESSORIES
ACCESSORIES

DESCRIPTION
The new Camry includes the accessory systems shown in the below.
System
Outline
Power Window System
The power window system includes one±touch auto down and key±off opera-
tion functions. The one±touch auto down function automatically opens the
driver 's door window fully. The key±off operation function makes it possible
to operate the power windows for approximately 45 seconds after the igni-
tion key is turned to the ACC or LOCK position, if the front doors are not
opened.
The basic construction and operation of this system are the same as in the
previous model.
Door Lock Control System
This system has a ªkey±linked lock and unlock functionº and a ªkey±confine
prevention functionº. All doors can be locked and unlocked simultaneously
by a key operation at the front right or left foor. (The key needs to be oper-
ated twice to unlock all the doors at the driver's door.) If the door lock opera-
tion is performed when one of the front doors is open and the ignition key is
inserted in the key cylinder, doors are unlocked automatically to prevent the
ignition key from being left inside the vehicle.
The basic construction and operation are the same as in the previous model.
Wireless Door Lock Remote Con-
trol System
A remote control system in which the lock and unlock functions of all doors
and panic alarm function can be controlled by the signals emitted from a
transmitter is adopted. The transmitter is also provided with a 2±step unlock
function to unlock all the doors by pressing the switch twice.
The basic construction and operation are the same as in the '96 Avalon.
However, certain functions have been changed. For details, see page 107.
Theft Deterrent System
When an attempt is made to forcibly enter the vehicle or open the hood or
trunk lid without a key, or when the battery terminals are removed and re-
connected, this system sounds the horn and flashes the headlights and tail-
lights for about 1 minute to alert the owner. At the same time, it locks all the
doors and electronically disconnects the starter.
The basic operation is the same as in the '96 Avalon.
Power Seat
As in the previous model, the front seats are power assisted by electric mo-
tors so that the seat positions can be adjusted easily by a simple switch op-
eration.
The basic construction and operation are the same as in the previous model.