2000 TOYOTA CAMRY cooling

PP0C2±02
PP±30
± PREPARATIONCOOLING (1MZ±FE)
82 Author: Date:
EQUIPMENT
HeaterECT switch
Radiator cap tester
ThermometerECT switch
Torque wrench

PP0C3±04
± PREPARATIONCOOLING (1MZ±FE)
PP±31
83 Author: Date:
COOLANT
ItemCapacityClassification
Engine coolant9.2 liters (9.7 US qts, 8.1 lmp. qts)ºToyota Long Life Coolantº or equivalent

SS0AG±03
± SERVICE SPECIFICATIONSSFI (5S±FE)
SS±19
182 Author: Date:
SFI (5S±FE)
SERVICE DATA
Fuel pressure
regulatorFuel pressure at no vacuum301 ± 347 kPa (3.1 ± 3.5 kgf/cm2, 44 ± 50 psi)
Fuel pumpResistance at 20°C (68°F)0.2 ± 3.0 W
InjectorResistance at 20°C (68°F)
Injection volume
Difference between each cylinder
Fuel leakage13.4 ± 14.2 W
54 ± 69 cm3 (3.3 ± 4.2 cu in.) per 15 seconds
7 cm3 (0.4 cu in.) or less
One drop or less per minute
Throttle bodyThrottle body fully closed angle
Throttle opener setting speed6°
1,300 ± 1,500 rpm (w/ Cooling fan OFF)
Throttle
position
sensorClearance between stop screw and lever
0 mm (0 in.) VTA ± E2
Throttle valve fully open VTA ± E2
± VC ± E2
0.2 ± 5.7 kW
2.0 ± 10.2 kW
2.5 ± 5.9 kW
IAC valveResistance (+B ± ISCC or ISCO) at cold
at hot17.0 ± 24.5 W
21.5 ± 28.5 W
VSV for EVAPResistance at 20°C (68°F)30 ± 34 W
VSV for vapor
pressure
sensorResistance at 20°C (68°F)33 ± 39 W
VSV for EGRResistance at 20°C (68°F)33 ± 39 W
ECT sensorResistance at ±20°C (±4°F)
at 0°C (32°F)
at 20°C (68°F)
at 40°C (104°F)
at 60°C (140°F)
at 80°C (176°F)10 ± 20 kW
4 ± 7 kW
2 ± 3 kW
0.9 ± 1.3 kW
0.4 ± 0.7 kW
0.2 ± 0.4 kW
IAT sensorResistance at ±20°C (±4°F)
at 0°C (32°F)
at 20°C (68°F)
at 40°C (104°F)
at 60°C (140°F)
at 80°C (176°F)10 ± 20 kW
4 ± 7 kW
2 ± 3 kW
0.9 ± 1.3 kW
0.4 ± 0.7 kW
0.2 ± 0.4 kW
MAP sensorPower source voltage4.5 ± 5.5 V
Vapor Pressure
SensorPower sorce voltage4.5 ± 5.5 V
A/F sensorResistance at 20°C (68°F)0.8 ± 1.4 W
Heated oxygen
sensorResistance at 20°C (68°F)11 ± 16 W
Fuel cut rpmFuel return rpm1,500 rpm

SS0AI±03
± SERVICE SPECIFICATIONSCOOLING (5S±FE)
SS±23
186 Author: Date:
COOLING (5S±FE)
SERVICE DATA
ThermostatValve opening temperature
Valve lift at 95°C (203°F)80 ± 84°C (176 ± 183°F)
8 mm (0.31 in.) or more
Radiator capRelief valve opening pressure STD
Minimum74 ± 103 kPa (0.75 ± 1.05 kgf/cm2, 10.7 ± 14.9 psi)
59 kPa (0.6 kgf/cm2, 8.5 psi)
Electric
cooling fanRotating amperage4.9 ± 8.5 A

SS0AJ±03
SS±24
± SERVICE SPECIFICATIONSCOOLING (5S±FE)
187 Author: Date:
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Cylinder block x Drain plug2525018
Water pump x Water pump cover, Cylinder block8.89078 in.´lbf
Water bypass pipe x Water pump cover9.39582 in.´lbf
Generator drive belt adjusting bar x Cylinder block2222416
Water inlet x Water pump cover8.89078 in.´lbf
Oil cooler x Radiator lower tank8.38574 in.´lbf
Oil cooler pipe x Oil cooler14.715011
Upper radiator support x Body12.81309
Electric cooling fan x Radiator5.05044 in.´lbf

SS07C±01
± SERVICE SPECIFICATIONSCOOLING (1MZ±FE)
SS±25
188 Author: Date:
COOLING (1MZ±FE)
SERVICE DATA
ThermostatValve opening pressure
Valve lift at 95°C (203°F)80 ± 84°C (176 ± 183°F)
10.0 mm (0.394 in.) or more
Radiator capRelief valve opening pressure STD
Minimum83 ± 113 kPa (0.85 ± 1.15 kgf/cm2, 12.1 ± 16.4 psi)
69 kPa (0.7 kgf/cm2, 10.0 psi)
RadiatorPlate height7.4 ± 7.8 mm (0.2959 ± 0.3119 in.)
Cooling fanRotating amperage at 20°C (68°F) No.1
No.28.3 ± 11.3 A
8.3 ± 11.3 A

SS07D±02
SS±26
± SERVICE SPECIFICATIONSCOOLING (1MZ±FE)
189 Author: Date:
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
RH engine drain plug x EGR cooler77061 in.´lbf
LH engine drain plug x Union on cylinder block131309
Water pump x Cylinder block88069 in.´lbf
Water inlet x Water inlet housing88069 in.´lbf
Water inlet pipe x LH cylinder head19.520014
Radiator support x Body12.81309
No.1 cooling fan shroud x Radiator5.05044 in.´lbf
No.2 cooling fan shroud x Radiator5.05044 in.´lbf
Radiator oil cooler x Radiator lower tank8.38574 in.´lbf
Radiator inlet pipe x Radiator lower tank14.715011

S05331
B01279
Plug
Disconnect
B01280
2.5 mm Hexagon Wrench
SF±30
± SFI (5S±FE)THROTTLE BODY
1463 Author: Date:
(b) Connect a TOYOTA hand±held tester or OBDII scan tool.
(1) Remove the fuse cover on the instrument panel.
(2) Connect a TOYOTA hand±held tester or OBDII
scan tool to the DLC3.
(3) Please refer to the TOYOTA hand±held tester or
OBDII scan tool operator's manual for further de-
tails.
(c) Check the idle speed.
Idle speed: 700 ± 50 rpm
(d) Check and adjust the throttle opener setting speed.
(1) Disconnect the vacuum hose from the throttle open-
er, and plug the hose end.
(2) Maintain the engine speed at 2,500 rpm.
(3) Release the throttle valve.
(4) Check that the throttle opener is set.
Throttle opener setting speed:
1,300 ± 1,500 rpm (w/ Cooling fan OFF)
(5) Using a 2.5 mm hexagon wrench, loosen the lock
nut and adjust the throttle opener setting speed by
turning the throttle opener adjusting screw. Tighten
the lock nut.
(6) Reconnect the vacuum hose to the throttle opener.
(e) Disconnect the TOYOTA hand±held tester or OBDII scan
tool.