2000 TOYOTA CAMRY suspension

Q09989
Q09990
Q09991
Q09992
Q09993
MX±6
± MANUAL TRANSAXLE (E153)MANUAL TRANSAXLE UNIT
1807 Author: Date:
17. DISCONNECT PS GEAR ASSEMBLY FROM FRONT
SUSPENSION MEMBER
(a) Remove the 2 nuts and disconnect the stabilizer bar link
from the stabilizer bar.
Torque: 39 N´m (400 kgf´cm, 29 ft´lbf)
(b) Remove the 4 set bolts of the stabilizer bar bracket.
Torque: 19 N´m (195 kgf´cm, 14 ft´lbf)
(c) Remove the 2 bolts, nut and No.1 fuel tube protector.
(d) Tie the PS gear assembly to the proper position with a
code or an equivalent to suspend the assembly securely.
(e) Remove the 2 set bolts and nuts of the PS gear assembly.
Torque: 181 N´m (1,850 kgf´cm, 134 ft´lbf)
18. DISCONNECT FRONT ENGINE ABSORBER FROM
TRANSAXLE
Remove the 2 bolts.
Torque: 48 N´m (490 kgf´cm, 35 ft´lbf)
19. REMOVE RH EXHAUST MANIFOLD STAY
Remove the bolt, nut and stay.
Torque: 20 N´m (200 kgf´cm, 14 ft´lbf)
20. REMOVE 3 ENGINE FRONT SIDE MOUNTING BOLTS
Torque:
Silver bolt: 44 N´m (450 kgf´cm, 33 ft´lbf)
Green bolt: 66 N´m (670 kgf´cm, 48 ft´lbf)

Q09994
Q09995
Q09996
CA
C
A
CB
AAB
C
Q09997
14 mm Head B14 mm Head B
14 mm Head A
± MANUAL TRANSAXLE (E153)MANUAL TRANSAXLE UNIT
MX±7
1808 Author: Date:
21. REMOVE LH ENGINE MOUNTING INSULATOR WITH
BRACKET
(a) Remove the 2 hole plugs, nuts and 3 bolts.
Torque:
Bolt: 64 N´m (650 kgf´cm, 47 ft´lbf)
Nut: 80 N´m (820 kgf´cm, 59 ft´lbf)
(b) Lift up the transaxle and remove the left engine mounting
insulator with the bracket.
22. REMOVE HOLE PLUG AND 4 ENGINE REAR SIDE
MOUNTING NUTS
Torque: 66 N´m (670 kgf´cm, 48 ft´lbf)
23. ATTACH ENGINE SLING DEVICE TO ENGINE HANG-
ER
(See page EM±69)
24. DISCONNECT STEERING RETURN PIPE FROM
FRONT SUSPENSION MEMBER
Remove the 2 bolts.
Torque: 10 N´m (100 kgf´cm, 7 ft´lbf)
25. REMOVE FRONT SUSPENSION MEMBER WITH LOW-
ER SUSPENSION ARM
(a) Remove the LH and RH fender liner set screws.
(b) Remove the 6 bolts, 4 nuts, front LH and RH suspension
member braces, rear LH and RH suspension member
braces and front suspension member with the lower sus-
pension arm.
Torque:
Bolt A: 181 N´m (1,850 kgf´cm, 134 ft´lbf)
Bolt B: 32 N´m (330 kgf´cm, 24 ft´lbf)
Nut C: 36 N´m (370 kgf´cm, 27 ft´lbf)
26. JACK UP TRANSAXLE SLIGHTLY
Using a transmission jack, support the transaxle.
27. REMOVE FLYWHEEL HOUSING UNDER COVER AND
TRANSAXLE LOWER SIDE MOUNTING BOLT
(a) Remove the 2 bolts and cover.
Torque: 7.8 N´m (80 kgf´cm, 69 in.´lbf)
(b) Remove the 3 bolts of the transaxle lower side.
Torque:
14 mm head A: 46 N´m (470 kgf´cm, 34 ft´lbf)
14 mm head B: 37 N´m (380 kgf´cm, 27 ft´lbf)

PP1WM±01
± PREPARATIONSUSPENSION AND AXLE
PP±79
131 Author: Date:
SUSPENSION AND AXLE
SST (Special Service Tools)
09223±56010Crankshaft Rear Oil Seal
ReplacerFront drive shaft
09240±00020Wire Gauge SetFront drive shaft
09309±36010Transmission Rear Bearing
ReplacerFront drive shaft
09310±35010Countershaft Bearing ReplacerFront axle hub
09316±20011Transfer Bearing ReplacerFront drive shaft
09316±60011Transmission & Transfer Bearing
ReplacerFront axle hub
Front suspension
(09316±00011)Replacer Pipe
(09316±00041)Replacer ºCº
09506±35010Differential Drive Pinion Rear
Bearing ReplacerFront drive shaft
09520±00031Rear Axle Shaft PullerFront axle hub
09521±24010Drive Shaft Boot Clamping ToolFront drive shaft
09527±17011Rear Axle Shaft Bearing RemoverFront axle hub

PP±80
± PREPARATIONSUSPENSION AND AXLE
132 Author: Date:
09555±55010Differential Drive Pinion
Bearing ReplacerFront drive shaft
09608±16042Front Hub Bearing Adjusting ToolFront drive shaft
(09608±02021)Bolt & Nut
(09608±02041)Retainer
09608±32010Steering Knuckle Oil Seal
ReplacerFront axle hub
Front suspension
09610±20012Pitman Arm PullerFront axle hub
09628±10011Ball Joint PullerFront axle hub
Rear axle hub
09628±62011Ball Joint PullerFront axle hub
Front suspension
09727±30021Coil Spring CompressorFront suspension
Rear suspension
09729±22031Front Spring Upper Seat HolderFront suspension
09950±00020Bearing RemoverFront axle hub
Front drive shaft
09950±60010Replacer SetFront axle hub
(09951±00400)Replacer 40

± PREPARATIONSUSPENSION AND AXLE
PP±81
133 Author: Date:
09950±70010Handle SetFront axle hub
(09951±07100)Handle 100

PP08W±01
PP±82
± PREPARATIONSUSPENSION AND AXLE
134 Author: Date:
RECOMMENDED TOOLS
09025±00010Torque Wrench (30 kgf±cm)
09042±00010Torx Socket T30 .
09905±00012Snap Ring No.1 Expander .
09905±00013Snap Ring Pliers .

PP08X±03
± PREPARATIONSUSPENSION AND AXLE
PP±83
135 Author: Date:
EQUIPMENT
Dial indicator
Drill
Torque wrench

PP08Y±01
PP±84
± PREPARATIONSUSPENSION AND AXLE
136 Author: Date:
LUBRICANT
ItemCapacityApplication
5S±FE:
Outboard joint greaseColor=Black
Inboard joint greaseColor=Yellow ocher
140 ± 160 g (5.5 ± 6.3 oz.)
185 ± 215 g (7.3 ± 8.5 oz.)
1MZ±FE:
Outboard joint greaseColor=Black
Inboard joint greaseColor=Gray
Joint side
Boot side
105 ± 125 g (3.7 ± 4.4 oz.)
142.5 ± 157.5 g (5.0 ± 5.6 oz.)
52.5 ± 57.5 g (2.1 ± 2.3 oz.)