REAR AXLE -General Information27-2
GENERAL INFORMATION
The rear axle has the following features.
DD.O.J.-type on the differential side and B.J.-type on the hub side constant velocity joints are featured
in the drive shaft.
DLarge capacity and high rigidity taper-roller type unit bearing in the wheel bearing is featured.
DThe hybrid LSD and differential lock with LSD which benefit driving on muddy and rough roads are
featured as an option.
DABS rotor to detect wheel speed is press-fitted in the drive shaft.
NOTE
The structure of normal differential and hybrid LSD is basically the same as featured in existing models.
SPECIFICATIONS
ItemNormal DifferentialHybrid LSDDifferential Lock
with LSD
Reduction gear typeHypoid gearHypoid gearHypoid gear
Reduction ratio4.900*1, 3.917*2,
4.100*3, 4.300*44.900*1, 3.917*2,
4.100*3, 4.300*44.900*1, 3.917*2,
4.100*3, 4.300*4
LSD type-Torque sensing +
VCUTorque sensing
Differential gear type (Type´
number of gears)Side gearStraight bevel gear
´2Helical gear´2Helical gear´2
Pinion gearStraight bevel gear
´2Long pinion´4,
Short pinion´4Long pinion´4,
Short pinion´4
Number
of teethDrive gear49*1, 47*2, 41*3,
43*449*1, 47*2, 41*3,
43*449*1, 47*2, 41*3,
43*4
Drive pinion10*1,*3,*4, 12*210*1,*3,*4, 12*210*1,*3,*4, 12*2
Side gear182222
Pinion gear1077
Bearings (Outside diameter´Side90.0´55.090.0´55.090.0´55.0
Inside diameter) mm
Front68.3´30.268.3´30.268.3´30.2
Rear79.4´36.579.4´36.579.4´36.5
NOTE
*1:4D56
*2:4M41-A/T
*3:4M41-M/T
*4:6G74 GDI
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
