2000 HONDA PASSPORT Owners Manual

Contro
l Location s

METER S AN D GAUGE S
TRANSMISSION AN D
TRANSFE R CONTRO L
LEVER S
PARKIN G BRAK E LEVE R

Instrument s an d Control s

Indicator
s an d Gauge s

TUR N SIGNA L INDICATO R LIGH T
SR S INDICATO R LIGH T
CHEC K ENGIN E
INDICATO R LIGH T
LO W OI L PRESSUR E
INDICATO R LIGH T
ENGIN E COOLAN T
TEMPERATUR E GAUG E
CHARGIN G SYSTE M
INDICATO R LIGH T TUR
N SIGNA L INDICATO R LIGH T
SPEEDOMETE R
POWE R DRIV E
INDICATO R LIGH T
SEA T BEL T

REMINDE R

LIGH T

ANTI-LOCK BRAK E

SYSTE M INDICATO R CRUIS
E SE T
INDICATO R LIGH T
FUE L GAUG E
TRI P ODOMETE R
RESE T KNO B
TACHOMETE R 4-WHEEL DRIV E (4WD )
INDICATO R LIGH T

Instrument s an d Control s

HIG
H BEA M INDICATO R LIGH T
BRAK E SYSTE M INDICATO R LIGH T
TRIP ODOMETE R
WINTE R DRIV E
INDICATO R LIGH T
LO W FUE L
INDICATO R LIGH T
REDUCE
D POWE R
INDICATO R LIGH T

CHECKTRAN S

INDICATO R LIGH T

(A/ T only )
A/
T OI L TEM P
INDICATO R LIGH T

(A/ T only )

ODOMETER

Gauge
s

TRIP ODOMETE R
TRIP ODOMETE R
RESE T KNO B
Tachomete
r

The tachometer shows the engine speed in revolutions per minute
(rpm). To protect the engine from
damage, never drive with the
tachometer needle in the red zone.

Speedomete r

The speedometer shows vehicle speed in miles per hour (mph).
Odomete r
The odometer indicates the total
distance your vehicle has been
driven.
Tri p Odometer/Rese t Butto n
There are two trip odometers.
Each odometer works independently, so you can keep
track of two different distances. Switch between them and the
Instrument s an d Control s
ODOMETE
R
TACHOMETE
R
SPEEDOMETER

ENGIN
E COOLAN T
TEMPERATUR E GAUG E
FUE
L GAUG E
odometer by repeatedly pressing
and releasing the reset button.
To reset a trip odometer, display it, then press and hold the reset
button until the odometer clears to
zero.

Fue l Gaug e

The fuel gauge will register the approximate fuel level in the tank
when the key is in the "ON"
position. The following conditions may be considered normal: Gas station pumps may shut off
before the fuel gauge indicates
"F" (FULL). The amount of fuel required for
a fill-up may not exactly
correspond to the gauge. The needle may not move away
from "F" (FULL) until some
time after fill-up.
Instrument s an d Control s

The needle may move during
turning, stopping and

acceleration.

Fue l Doo r

This is a reminder that the fuel fill door is on the left side of the
vehicle. Always park with that side closest to the service station
pumps.
Engin
e Coolan t

Temperatur e Gaug e

When the key is in the "ON"
position, the engine coolant temperature gauge indicates the
temperature of the engine coolant.
The letters "C" and "H" on the gauge represent "Cold" and
"Hot," respectively. The gray area indicates the
normal engine coolant

temperature.

If the pointer reaches the "H"
mark, pull safely to the side of the
road. Turn to page 213 for instructions and precautions on
checking the engine's cooling
system.

Driving with the temperature gauge pointer at "H" can causeserious damage to the engine.

Instrument s an d Control s
NOTIC
E

NORMA
L
RANG E OVERHEATIN
G

Indicato
r Light s

SEA T BEL T REMINDE R LIGH T Sea
t Bel t Reminde r

As a reminder to you and your
passengers, this light will come on for about six seconds each time
the key is turned to the "ON"

position.

The beeper will also operate for about six seconds after turning the
key to the "ON" position if the
driver's seat belt is not fastened.

Brake Syste m

The service braking system is a split system designed so that one
part will provide some braking action if there is a loss of
hydraulic pressure in the other
part of the system.
To serve as a reminder, the "BRAKE" system light is
designed to come on while the
parking brake is set and the key is turned to the "ON" position. Have
Instrument s an d Control s

BRAK
E

HIG
H BEA M INDICATOR LIGHT
BRAK E SYSTE M INDICATOR LIGHT
CHARGIN G SYSTE M INDICATOR LIGHT

the system repaired if the light
does not come on when the key is
turned to the "ON" position
without the engine running or
when the parking brake is set.
This light does not eliminate the need for brake inspection and
maintenance. The brake fluid
level must be checked regularly.See the maintenance section of
this manual for other brake
checks.
If the light remains on after
engine start up with the parking
brake released, or comes on during operation of the vehicle, it
may mean that there is something
wrong with the brake system.

What to do?1. Check to see if the parking
brake has been fully released.
2. If it has, pull off the road and
stop carefully. Remember that: Stopping distances may be
longer.
You may have to push
harder on the pedal. The pedal may go down
farther than normal.
3. Have the vehicle towed to the nearest Honda dealer for
repair.
Do not continue to drive with the
brake system light on. There may
be a serious problem with the braking system. Driving under
this condition is hazardous and
could lead to an accident.
The brake system light does not indicate that the parking brake is
fully set. When applying the
parking brake, always pull it up as
far as possible. Hig
h Bea m
The headlight high beam indicator
lights up when the headlights are
on high beam.

Chargin g Syste m

This light should come on when
the key is turned to the "ON"
position and the alternator is not
charging. The light may stay on at
engine idle; however, it should go off and stay off above the normal
engine idle speed. If the light
comes on while driving, the
charging system should be
checked at once so the battery will
not completely discharge. Stop the engine, and check for a broken
drive belt. If it is broken, or if the
drive belt is not responsible for the trouble, have your Honda
dealer inspect and correct the
fault. If the drive belt is broken,

Instrument s an d Control s

LO
W
OI L

PRESSUR E
INDICATO R TUR
N SIGNA L INDICATOR S
MALFUNCTIO N
INDICATO R
overheating of the engine could
result. Have the system checked as soon as possible.

Malfunctio n Indicato r

Lam p

The indicator light should turn on when the key is turned to the
"ON" position, but should go out
after the engine is started. (The
light will stay on a short time afterthe engine starts.) If the light stays
on, or comes on while driving, it indicates a problem in the engine
emissions control system. Have your Honda dealer inspect thesystem and correct the problem. If
this indicator starts flashing as
you drive, engine misfiring has
been detected. Misfiring can
damage the catalytic converter and the engine. Stop as soon as it
is safe, turn off the engine, and
call for assistance.
Instrument s an d Control s

LO
W FUE L
INDICATO R
REDUCE
D
POWE R
INDICATO R CHEC
K
ENGIN E