1999 TOYOTA AVENSIS light

BO–10
– BODYWINDSHIELD
(e) Install the upper part of roof headlining.
(f) Install the assist grip.
(g) Install the map light assembly.
(h) Install the sun visors and holders.
(i) Install the cowl louver.
(j) Install the weatherstrip.
(k) Install the front wiper arms.
Torque: 20 N·m (205 kgf·cm, 15 ft·lbf)

BO19O–02
I12752
Assist Grip Cushion
Assist Grip
Map Light
Sun Visor
Room Light
Front Pillar Garnish
Front Door
Opening TrimCenter Pillar Upper Garnish
Roof Side Inner Garnish
Front Seat Outer Belt
Rear Door Opening Trim
Rear Door Scuff Plate Side Seatback
Rear Seat Cushion
Front Door Scuff PlateCenter Pillar
Lower GarnishRoom LightSliding Roof
Opening TrimRoof
Headlining
Map LightAssist Grip Cushion
Assist Grip
42 (430, 31)
21 (214, 15)
w/ Sliding Roof:
: Specified torque
N·m (kgf·cm, ft·lbf)
21 (214, 15)
w/ Curtain shield air bag:
Front Pillar Garnish
BO–22
– BODYROOF HEADLINING (Sedan)
ROOF HEADLINING (Sedan)
COMPONENTS
w/ Curtain shield air bag:
Front Pillar Garnish

H03638
: 4 Clips
H11613
(1)
(5)
(4)
(3)(2)
H11614
BO–24
– BODYROOF HEADLINING (Sedan)
4. REMOVE ROOF SIDE INNER GARNISH
Remove the roof side inner garnish.
5. REMOVE THESE PARTS:
(a) Remove the assist grips.
(b) Remove the sun visors and holders.
(c) Remove the room light.
(d) Remove the map light.
(e) w/ Sliding Roof:
Remove the sliding roof opening trim.
6. REMOVE ROOF HEADLINING
Using a clip remover, remove the 3 clips and roof headlining.
7. REMOVE ASSIST GRIP CUSHION
8. w/ Curtain Shield Airbag:
REMOVE CURTAIN SHIELD AIRBAG
(a) In the oder shown in the illustration, remove the bolts and
grommets, then, remove the deployment section of the
curtain shield airbag.
(b) Put the removed air bag in the clear plastic bag and put
it on the instrument panel.

BO2J6–01
H11613
(2)
(3)(4)(1)
(5)
H12071
: Clip
H12072
: Clip
H03625
– BODYROOF HEADLINING (Sedan)
BO–25
INSTALLATION
1. w/ curtain shield airbag:
INSINSTALL CURTAIN SHIELD AIRBAG
In order shown in the illustration, install the deployment section
of the curtain shield airbag with the bolts and grommet.
Torque: 9.8 N·m (100 kgf·cm, 7 ft·lbf)
2. INSTALL ASSIST GRIP CUSHION
3. INSTALL ROOF HEAD LINING
Install the roof headlining with the 3 clips.
4. INSTALL THESE PARTS:
(a) w/ Sliding Roof:
Install the sliding roof opening trim.
(b) Install the map light.
(c) Install the room light.
(d) Install the sun visors and holders.
(e) Install the assist grips.
5. INSTALL ROOF SIDE INNER GARNISH
6. INSTALL CENTER PILLAR UPPER GARNISH
(a) Install the and center pillar upper garnish with the screw.
(b) Install the front seat outer belt shoulder anchor with the
bolt.
Torque: 42 N·m (430 kgf·cm, 31 ft·lbf)
7. INSTALL REAR SIDE SEATBACK
Install the rear side seatback with the bolt.
Torque: 21 N·m (214 kgf·cm, 15 ft·lbf)
8. INSTALL THESE PARTS:
(a) Install the rear seat cushion.
(b) Install the center pillar lower garnishes.
(c) Install the rear door scuff plates.
(d) Install the rear door opening trims.
(e) Install the front door scuff plates.

BO19R–02
I12750
Roof Headlining Assist Grip
Map LightRoof
Headlining
Sliding Roof
Opening Trim Room Light Sun Visor
Holder
Front Pillar GarnishCenter Pillar
Upper Garnish
Rear Door
Opening Trim
Front Door Scuff Plate
Front Door
Scuff PlateCenter Pillar
Lower GarnishRear Door
Scuff Plate w/ Sliding Roof:
: Specified torqueN·m (kgf·cm, ft·lbf)
42 (430, 31)
Assist Grip
Rear Side Seatback
21 (214, 15)
Front Pillar Garnish
42 (430, 31)
Roof Side Inner Garnish
21 (214, 15)
w/ Curtain shield air bag:
Front Pillar Garnish
– BODYROOF HEADLINING (Liftback)
BO–27
ROOF HEADLINING (Liftback)
COMPONENTS

H03647
: 5 Clips
H11613
(1)
(5)
(4)
(3)(2)
H11614
– BODYROOF HEADLINING (Liftback)
BO–29
4. REMOVE ROOF SIDE INNER GARNISH
Remove the garnish.
5. REMOVE THESE PARTS:
(a) Remove the assist grips.
(b) Remove the sun visors and holders.
(c) Remove the room light.
(d) Remove the map light.
(e) w/ Sliding Roof:
Remove the sliding roof opening trim.
6. REMOVE ROOF HEADLINING
Using a clip remover, remove the 3 clips and roof headlining.
7. w/ Curtain Shield Airbag:
REMOVE CURTAIN SHIELD AIRBAG
(a) In the oder shown in the illustration, remove the bolts and
grommets, then, remove the deployment section of the
curtain shield airbag.
(b) Put the removed airbag in the clear plastic bag and put it
on the instrument panel.

BO2J8–01
H11613
(2)
(3)(4)(1)
(5)
H03647
: Clip
H12072
: Clip
H03625
BO–30
– BODYROOF HEADLINING (Liftback)
INSTALLATION
1. w/ Curtain Shield Airbag:
INSTALL CURTAIN SHIELD AIRBAG
In order shown in the illustration, install the deployment section
of the curtain shield airbag with the bolts and grommet.
Torque: 9.8 N·m (100 kgf·cm, 7 ft·lbf)
2. INSTALL ASSIST GRIP CUSHION
3. INSTALL ROOF HEAD LINING
Install the 3 clips and roof headlining.
4. INSTALL THESE PARTS:
(a) w/ Sliding Roof:
Install the sliding roof opening trim.
(b) Install the map light.
(c) Install the room light.
(d) Install the sun visors and holders.
(e) Install the assist grips.
5. INSTALL ROOF SIDE INNER GARNISH
6. INSTALL CENTER PILLAR UPPER GARNISH
(a) Install the center pillar upper garnish with the screw.
(b) Install the front seat outer belt shoulder anchor with the
bolts.
Torque: 42 N·m (430 kgf·cm, 31 ft·lbf)
7. INSTALL REAR SIDE SEATBACK
Install the rear side seatback with the bolt.
Torque: 21 N·m (214 kgf·cm, 15 ft·lbf)
8. INSTALL THESE PARTS:
(a) Install the center pillar lower garnishes.
Torque: 21 N·m (214 kgf·cm, 15 ft·lbf)
(b) Install the rear door scuff plates.
(c) Install the rear door opening trims.
(d) Install the front door scuff plates.

BO19U–02
I12753
Roof Headlining Rear Room Partition
Net Hook
Assist Grip
Map Light
No.2 Room LightAssist GripRoof
Headlining
Sliding Roof Opening Trim Room Light Sun Visor
Holder
Front Pillar GarnishCenter Pillar
Upper GarnishRear Door
Opening Trim
Roof Side Inner Garnish
Deck Side Trim Cover
and Panel
Deck Trim Side Board
Rear Seat Outer Belt
Tonneau Cover
Rear Floor Finish Plate
Roof Side
Inner Garnish
Deck Side Trim Cover
and Panel
Deck Trim Side Board Rear Seatback
AssemblyRear Floor CarpetRoom Partition Net
Rear Side SeatbackFront Door Scuff Plate
Front Pillar Garnish
Front Door
Scuff PlateCenter Pillar
Lower GarnishRear Door
Scuff Plate w/ Sliding Roof:
: Specified torqueN·m (kgf·cm, ft·lbf)
42 (430, 31)
37 (378, 27)
42 (430, 31)
21 (214, 15)
21 (214, 15)
w/ Curtain shield air bag:
Front Pillar Garnish
BO–32
– BODYROOF HEADLINING (Wagon)
ROOF HEADLINING (Wagon)
COMPONENTS