1999 NISSAN PICK-UP 4WD

Gear Components Ð 4WD Model
NMT095
MAJOR OVERHAULFS5W71C
MT-2004

General Specifications
Applied model2WD 4WD
KA24E TD25 KA24E TD25T
Transmission FS5W71C FS5R30A
Number of speed 5
Shift pattern
Synchromesh type Warner
Gear ratio
1st 3.592 3.985 3.592 3.580
2nd 2.246 2.246 2.246 2.077
3rd 1.415 1.415 1.415 1.360
4th 1.000 1.000 1.000 1.000
OD 0.821 0.821 0.821 0.811
Reverse 3.657 3.657 3.657 3.636
Number of teeth
Mainshaft
Drive 21 21 21 22
1st 33 34 33 32
2nd 28 28 28 30
3rd 26 26 26 29
OD 21 21 21 24
Reverse 36 36 36 30
Countershaft
Drive 32 32 32 32
1st 14 13 14 13
2nd 19 19 19 21
3rd 28 28 28 31
OD 39 39 39 43
Reverse 15 15 15 12
Reverse idler gear 21 22
Oil capacity
!(lmp pt)2.0 (3-1/2) 4.9 (8-5/8) 5.1 (9)
RemarksSub-gearCounter
drive gearInstalled
2nd & 3rd double baulk
ring type synchronizer Reverse
idler gearNot installed
Double baulk
ring type
synchronizer2nd and 3rd gears
Reverse
synchronizerInstalled
SERVICE DATA AND
SPECIFICATIONS (SDS)FS5W71C & FS5R30A
MT-2007

Rear propeller shaft (4WD models)
SPD509A
PROPELLER SHAFTPropeller shaft
PD-2005

Propeller Shaft
GENERAL SPECIFICATIONS
2WD models
Applied modelShort body Long body
Without ABS With ABS Without ABS With ABS
Propeller shaft model3S71H
Number of joints3
Coupling method with transmission Sleeve type
Types of journal bearings Solid type (disassembly type)
Shaft length (Spider to spider)
mm (in)1st 641 (25.24)
2nd 704 (27.72) 678 (26.69) 1,004 (39.53) 978 (38.50)
Shaft outer diameter
mm (in)1st 75 (2.95)
2nd 65 (2.56)
4WD models
Location Front Rear
Applied model KA24E KA24E
Propeller shaft model 2F63H 3S71H
Number of joints 2 3
Coupling method with transmission Flange type Sleeve type
Types of journal bearings Solid type (disassembly type)
Shaft length (Spider to spider)
mm (in)1st 546 (21.50) 396 (15.59)
2nd Ð 866 (34.09)
Shaft outer diameter
mm (in)1st 50.8 (2.000) 75.0 (2.953)
2nd Ð 65.0 (2.559)
SERVICE DATA AND SPECIFICATIONS (SDS)
PD-2012