1998 TOYOTA 4RUNNER Owners Manual

4RUNNER (1998)
SHIFTING BETWEEN ºH2º AND ºH4º
To shift from ºH2º to ºH4º, move
the front drive control lever.
This can be done when the vehicle is
stopped, or moving straight ahead at
speeds of 40km/h (25mph) or less.
You need not depress the clutch ped-
al. If you have trouble shifting, de-
press or release the accelerator pedal
momentarily while pushing the front
drive control lever.
CAUTION
Never move the front drive con-
trol lever if wheels are slipping.
Stop the slipping or spinning be-
fore shifting.
To shift from ºH4º to ºH2 º, simply
move the front drive control lever.
This can be done at any vehicle
speed. You need not depress the
clutch pedal.
If the indicator light does not go off
when you shift the transfer into ºH2º,
drive straight ahead while accelerating
or decelerating, or drive in reverse. With A.D.D.
To shift from ºH2º to ºH4º,
reduce
your speed to less than 80 km/h (50
mph) and move the front drive control
lever. You need not depress the clutch
pedal.
If you have trouble shifting in cold
weather, reduce your speed or stop
the vehicle and reshift.
CAUTION
Never move the front drive con-
trol lever if wheels are slipping.
Stop the slipping or spinning be-
fore shifting.
To shift from ºH4º to ºH2º, simply
move the front drive control lever.
This can be done at any vehicle
speed. You need not depress the
clutch pedal.
If the indicator light does not go off
when you shift the transfer into ºH2º,
drive straight ahead while accelerating
or decelerating, or drive in reverse. SHIFTING BETWEEN ºH4º AND ºL4º
To shift from ºH4º to ºL4,
stop the
vehicle or reduce your speed to less
than 8 km/h (5 mph). With your foot
off the accelerator pedal, depress the
clutch pedal and move the front drive
control lever.
To shift from ºL4º to ºH4º, depress
the clutch pedal and move the front
drive control lever.
This can be done at any vehicle
speed.
(c) Shifting procedure (leve
r
type with manu
transmission)

4RUNNER (1998)
SHIFTING BETWEEN ºH2º AND ºH4º
To shift from ºH2º to ºH4º, move
the front drive control lever.
This can be done when the vehicle is
stopped, or moving straight ahead at
speeds of 40 km/h (25 mph) or less.
If you have trouble shifting, depress
or release the accelerator pedal mo-
mentarily while pushing the front drive
control lever.
CAUTION
Never move the front drive con-
trol lever if wheels are slipping.
Stop the slipping or spinning be-
fore shifting.
To shift from ºH4º to ºH2º, simply
move the front drive control lever.
This can be done at any vehicle
speed.
If the indicator light does not go off
when you shift the transfer into ºH2º,
drive straight ahead while accelerating
or decelerating, or drive in reverse. With A.D.D.
To shift from ºH2º to ºH4º,
reduce
your speed to less than 80 km/h (50
mph) and move the front drive control
lever.
If you have trouble shifting in cold
weather, reduce your speed or stop
the vehicle and reshift.
CAUTION
Never move the front drive con-
trol lever if wheels are slipping.
Stop the slipping or spinning be-
fore shifting.
To shift from ºH4º to ºH2º, simply
move the front drive control lever.
This can be done at any vehicle
speed.
If the indicator light does not go off
when you shift the transfer into ºH2º,
drive straight ahead while accelerating
or decelerating, or drive in reverse.
SHIFTING BETWEEN ºH4º ANDºL4º
To shift between ºH4º and ºL4º, stop
the vehicle and put the transmission
in ºNº. With your foot holding down
the brake pedal, move the front drive
control lever. SHIFTING BETWEEN ºH2º AND ºH4º
To shift from ºH2º to ºH4º,
reduce
your speed to less than 100 km/h (62
mph) and push in the º4WDº button.
If the indicator light does not come on
when you push in the º4WDº button,
drive straight ahead while accelerating
or decelerating.
If the indicator light flashes and the
buzzer sounds when you push in the
º4WDº button, reduce your speed or
stop the vehicle and reset.
CAUTION
Never push the º4WDº button if
wheels are slipping. Stop the slip-
ping or spinning before shifting.
(c) Shifting procedure (lev
type with automa
t
transmission) (c) Shifting procedure
(lever/button type)

4RUNNER (1998)
To shift from ºH4º to ºH2º, push the
º4WDº button again to turn it off.
This can be done at any vehicle
speed.
If the indicator light does not go off
when you shift the transfer into ºH2º,
drive straight ahead while accelerating
or decelerating, or drive in reverse.
SHIFTING BETWEEN ºH2º OR ºH4º
AND ºL4º
To shift from ºH2º or ºH4º to ºL4º,
stop the vehicle and put the trans-
mission in ºNº. With your foot holding
down the brake pedal, move the front
drive control lever.
To shift from ºL4º to ºH2º or ºH4º,
stop the vehicle and put the trans-
mission in ºNº. With your foot holding
down the brake pedal, move the front
drive control lever. When the º4WDº
button is pushed in, the transfer shifts
into ºH4º; when the button is left out,
the transfer shifts into ºH2º.
If the indicator light does not go off
when you shift the transfer into ºH2º,
drive straight ahead while accelerating
or decelerating, or drive in reverse. Rear differential lock system

4RUNNER (1998)
The rear differential lock system is
provided for use only when wheel
spinning occurs in a ditch or on a
slippery or ragged surface.
This differential lock system is effec-
tive in case one of the rear wheels is
spinning.
Before using the rear differential lock
system, first shift the front drive con-
trol into ºL4º to see if it works. If this
has no effect, additionally use the rear
differential lock system.
CAUTION
Do not use the rear differential
lock in the conditions other than
above. Large steering effort and
careful cornering control will be
required.

4RUNNER (1998)
To lock the rear differential, push
the switch.
Be sure to stop the wheels before
locking the differential.
Vehicles with manual transmis-
sion'For easy locking, depress the
clutch pedal, push the lock switch and
slowly release the clutch pedal.
The indicator light will blink when the
switch is turned on. Wait a few se-
conds for the system to complete op-
eration. After the differential is locked,
the light will stop blinking and remain on. The anti- lock brake system does not
operate when the rear differential is
locked. It is normal operation for the
ºABSº warning light to be on at this
time.CAUTION

Do not lock the differential until
the wheels have stopped spin-
ning. Otherwise, the vehicle
may move in an unexpected
direction when the differential
lock is engaged, resulting in an
accident. This may also lead to
possible damage to differential
lock component parts.
Do not drive over 8 km/h (5
mph) when the differential is
locked.
To unlock the differential, push the
switch once again.
Unlock the differential as soon as the
vehicle moves out.

4RUNNER (1998)
For easy unlocking, slightly turn the
steering wheel in either direction while
the vehicle is in motion.
When the differential lock is disen-
gaged, the indicator light will go out. The differential will also unlock if you
shift the front drive control lever out
of ºL4º. Never forget to turn off the
switch after using this feature.
To check the indicator bulb, turn the
ignition key to the ºONº position, but
do not start the engine.
CAUTION
Do not keep driving with the dif-
ferential lock switch on.
Parking brake
When parking, firmly apply the
parking brake to avoid inadvertent
creeping.
To set: Pull up the lever. For better
holding power, first depress the brake
pedal and hold it while setting the
brake.
To release: Pull up the lever slightly,
press the thumb button, and lower.To remind you that the parking brake
is set, the parking brake reminder
light in the instrument panel remains
on until you release the parking brake.

4RUNNER (1998)
CAUTION
Before driving, be sure the park-
ing brake is fully released and
the parking brake reminder light
is off.
Cruise control
The cruise control allows you to
cruise the vehicle at a desired
speed over 40 km/h (25 mph) even
with your foot off the accelerator
pedal.
Your cruising speed can be maintained
up or down grades within the limits of
engine performance, although a slight
speed change may occur when driving
up or down the grades. On steeper
hills, a greater s peed change will oc-
cur so it is better to drive without the
cruise control.
CAUTION
To help maintain maximum con-
trol of your vehicle, do not use
the cruise control when driving
in heavy or varying traffic, or
on slippery (rainy, icy or snow-
covered) or winding roads.
Avoid vehicle speed increases
when driving downhill. If the ve-
hicle speed is too fast in rela-
tion to the cruise control set
speed, cancel the cruise control
then downshift the transmission
to use engine braking to slow down.

4RUNNER (1998)
TURNING ON THE SYSTEM
To operate the cruise control, press
the ºCRUISE ON- OFFº button. This
turns the system on. The indicator
light in the instrument panel shows
that you can now set the vehicle at
a desired cruising speed. Another
press will turn the system completely
off.
CAUTION
To avoid accidental cruise control
engagement, keep the ºCRUISE
ON- OFFº switch off when not us-
ing the cruise control.