1998 TOYOTA 4RUNNER Owners Manual

4RUNNER (1998)
2. Release the bulb retaining spring and remove the bulb. Install a
new bulb and the bulb retaining
spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.
3. Install the rubber cover, and snuggle on the boss. Insert the
connector.
Make sure the rubber cover fits snug-
ly on the connector and the headlight
body.
Aiming is not necessary after replac-
ing the bulb. When aiming adjustment
is necessary, contact your Toyota
dealer. ÐParking and front side ma
r
er lights

4RUNNER (1998)
Use a Phillips- head screwdriver.

4RUNNER (1998)

4RUNNER (1998)
ÐFront turn signal lights
Use a Phillips- head screwdriver.

4RUNNER (1998)
Use a Phillips- head screwdriver.
ÐRear turn signal, stop an
tail, and back- up lights

4RUNNER (1998)
a: Back- up light
b: Rear turn signal lights
c: Stop and tail light ÐLicense plate lights
Use a Phillips- head screwdriver

4RUNNER (1998)

4RUNNER (1998)
ÐHigh mounted stoplight
Use a Phillips- head screwdriver