1998 TOYOTA 4RUNNER turn signal

4RUNNER (1998)
1. Clutch start cancel switch
2. Headlight and turn signal
switch
3. Wiper and washer switches
4. Back window defogger switch
5. Emergency flasher switch
6. Clock
7. Cup holder
8. Air conditioning controls
9. Car audio
10. Ashtray 11. Cigarette lighter
12. Ignition switch
13. Cruise control switch
14. Rear differential lock switch
15. Instrument panel light con- trol knob
16. Power rear view mirror con- trol switch (without power
windows)
17. Power back window lock switch (without power win-
dows)

4RUNNER (1998)
Indicator symbols on the instrument panel
Automatic transmission fluid temperatu
light*
1
SRS airbag warning light *
1
Unengaged ºParkº warning light *
1
Anti-lock brake system warning light *
1
Seat belt reminder light
*
1
Open door warning light *
1
(type A)
(type B)
Low oil pressure warning light *
1

Low fuel level warning light *
1
Brake system warning light
*
1
Discharge warning light *
1
Malfunction indicator lamp *
1
Low windshield washer fluid level warn
Headlight high beam indicator light
Overdrive- off indicator light
Turn signal indicator lights

4RUNNER (1998)
Part 1
OPERATION OF
INSTRUMENTS
AND CONTROLSÐ
Chapter 1- 4
Lights, Wipers
and Defogger
Headlights and turn signals
Emergency flashers
Instrument panel light control
Interior light
Personal lights
Luggage compartment light
Ignition switch light
Windshield wipers and washer
Back window wiper and
washer
Back window defogger
Headlights and turn signals

4RUNNER (1998)
HEADLIGHTS
To turn on the following lights:
Twist the headlight/turn signal leverknob.
Position 1ÐParking, tail, license plate,
side marker and instrument panel
lights
Position 2ÐHeadlights and all of the
above
If you turn the ignition switch to the
ºLOCKº position with the headlights
left on, a buzzer reminds you to turn
the lights off when you open the driv-
er 's door.
NOTICE
To prevent the battery from being
discharged, do not leave thelights on for a long period whenthe engine is not running.
Daytime running light system (Cana-
da only)
The headlights turn on when the park-
ing brake is released with the engine
started, even with the light switch in
the ºOFFº position. They will not go
off until the ignition switch is turned
off.
To turn on the other exterior lights
and instrument panel lights, twist the
knob to the position 1. Under the daytime running light sys-
tem, the headlights turn on at reduced
intensity. Twist the knob to the posi-
tion 2 to turn to full intensity for driv-
ing at night.

4RUNNER (1998)
TURN SIGNALS
To signal a turn, push the head-
light/turn signal lever up or down to
position 1.
The key must be in the ºONº position.
The lever automatically returns after
you make a turn, but you may have
to return it by hand after you change
lanes.
To signal a lane change, move the
lever up or down to the pressure point
(position 2) and hold it.
If the turn signal indicator lights
(green lights) on the instrument panel
flash faster than normal, a front or
rear turn signal bulb is burned out. Emergency flashers

4RUNNER (1998)
To turn on the emergency flashers,
push the switch.
All the turn signal lights will flash. To
turn them off, push the switch once
again.
Turn on the emergency flashers to
warn other drivers if your vehicle must
be stopped where it might be a traffic
hazard.
Always pull as far off the road as
possible.
The turn signal light switch will not
work when the emergency flashers are
operating.
NOTICE
To prevent the battery from being
discharged, do not leave theswitch on longer than necessarywhen the engine is not running.
Instrument panel light con-
trol

4RUNNER (1998)
SCAN
Radio
You can either scan all the frequen-
cies on a band or scan only the pre-
set stations for that band.
To scan all the frequencies:
Quickly push and release ºSCANº. If
you hear a beep, you held the button
too long, and the radio will scan the
preset stations. The radio will find the
next station up the station band, stay
there for a few seconds, and then
scan again. To select a station, push
ºSCANº a second time.
To scan the preset stations:
Push and hold ºSCANº until you hear
a beep. The radio will tune in the next
preset station up the band, stay there
for a few seconds, and then move to
the next preset station. To select a
station, push ºSCANº a second time. Compact disc player
There are two scan featuresÐyou can
either scan the tracks on a specific
disc or scan the first tracks of all the
discs in the magazine.
Scanning for the tracks on a disc:
Quickly push and release ºSCANº.
ºSCANº will appear on the display and
the player will scan all the tracks on
the disc you are listening to. If you
hear a beep, you held the button too
long, and the player will scan the first
tracks of all the discs in the maga-
zine. To select a track, push the
ºSCANº a second time. If the player
scanned all the tracks on the disc, it
will stop scanning.
Compact disc auto changer onlyÐ
Scanning for the first tracks of all the
discs in the magazine:
Push and hold ºSCANº until you hear
a beep. ºD´SCANº will appear on the
display and the player will perform the
first track of the next disc. To select
a disc, push the ºSCANº a second
time. If the player has scanned all the
discs, it will stop sc
anning. ST (Stereo reception) display
Your radio automatically changes to
stereo reception when a stereo broad-
cast is received. ºSTº appears on the
display. If the signal becomes weak,
the radio reduces the amount of chan-
nel separation to prevent the weak
signal from creating noise. If the sig-
nal becomes extremely weak, the ra-
dio switches from stereo to mono re-
ception.
TA P E
Push ºTAPEº to switch from radio or
compact disc operation to cassette op-
eration. If the audio system is off, you
can turn on the cassette player by
pushing ºTAPEº. In both cases, a cas-
sette must already be loaded in the
player.
TRACK (Track up/down button):
Compact disc player
By using this button, you can skip up
or down to a different track.
Push either side of the track button
until the number of the track you want
to listen to appears on the display. If
you want to return the beginning of
the current track, push the down side
of the button one time, quickly.

4RUNNER (1998)
ST (Stereo reception) display
Your radio automatically changes to
stereo reception when a stereo broad-
cast is received. ºSTº appears on the
display. If the signal becomes weak,
the radio reduces the amount of chan-
nel separation to prevent the weak
signal from creating noise. If the sig-
nal becomes extremely weak, the ra-
dio switches from stereo to mono re-
ception.
TRACK (Track up/down button):
Compact disc player
By using this button, you can skip up
or down to a different track.
Push either side of the track button
until the number of the track you want
to listen to appears on the display. If
you want to return the beginning of
the current track, push the down side
of the button one time, quickly. TUNE (Tuning)
Tuning
Your Toyota has an electronic tuning
radio (ETR). Push and release the º
~º
(up) or º !º (down) side of ºTUNEº to
step up or down the station band. (If
you hear a beep, you held the button
too long and the radio will go into the
seek mode.)
Seeking
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek a station, push and hold the º ~ º or º !º side of ºTUNEº until you
hear a beep. Do this again to find
another station.
Ty p e 3