1997 SUBARU LEGACY wiring diagram

B2M1142
CU: DTC P1540
—VEHICLE SPEED SENSOR MALFUNCTION
2—
WIRING DIAGRAM:
B2M1285
NOTE:
Check vehicle speed sensor 2 circuit.

548
2-7ON-BOARD DIAGNOSTICS II SYSTEM
11. Diagnostic Chart with Trouble Code for RHD Vehicles

OBD0501
CV: DTC P1700
—THROTTLE POSITION SENSOR CIRCUIT
MALFUNCTION—
WIRING DIAGRAM:
B2M0613
NOTE:
Check throttle position sensor circuit for automatic trans-
mission.

549
2-7ON-BOARD DIAGNOSTICS II SYSTEM
11. Diagnostic Chart with Trouble Code for RHD Vehicles

B2M0669
CW: DTC P1701
—CRUISE CONTROL SET SIGNAL CIRCUIT
MALFUNCTION—
WIRING DIAGRAM:
OBD0512
NOTE:
Check cruise control set signal circuit.

550
2-7ON-BOARD DIAGNOSTICS II SYSTEM
11. Diagnostic Chart with Trouble Code for RHD Vehicles

B2M1143
CX: DTC P1702
—AUTOMATIC TRANSMISSION DIAGNOSIS
INPUT SIGNAL CIRCUIT LOW INPUT—
WIRING DIAGRAM:
B2M0614
NOTE:
Check automatic transmission diagnosis input signal cir-
cuit.

551
2-7ON-BOARD DIAGNOSTICS II SYSTEM
11. Diagnostic Chart with Trouble Code for RHD Vehicles

B2M1144
CY: DTC P1722
—AUTOMATIC TRANSMISSION DIAGNOSIS
INPUT SIGNAL CIRCUIT HIGH INPUT—
WIRING DIAGRAM:
B2M0614
NOTE:
Check automatic transmission diagnosis input signal cir-
cuit.

552
2-7ON-BOARD DIAGNOSTICS II SYSTEM
11. Diagnostic Chart with Trouble Code for RHD Vehicles

B2M1147
CZ: DTC P1742
—AUTOMATIC TRANSMISSION DIAGNOSIS
INPUT SIGNAL CIRCUIT MALFUNCTION—
WIRING DIAGRAM:
B2M0614
NOTE:
Check automatic transmission diagnosis input signal cir-
cuit.

553
2-7ON-BOARD DIAGNOSTICS II SYSTEM
11. Diagnostic Chart with Trouble Code for RHD Vehicles

WIRING DIAGRAM:
B4M1034
7A1CHECK IF OTHER WARNING LIGHTS
TURN ON.
Turn ignition switch to ON (engine OFF).
: Do other warning lights turn on?
: Go to step7A2.
: Repair combination meter.
15
4-4cBRAKES [ABS 5.3 TYPE]
7. Diagnostics Chart for ABS Warning Light Circuit and Diagnosis Circuit Failure

WIRING DIAGRAM:
B4M1034
7B1CHECK INSTALLATION OF ABSCM CON-
NECTOR.
Turn ignition switch to OFF.
: Is ABSCM connector inserted into ABSCM
until the clamp locks onto it?
: Go to step7B2.
: Insert ABSCM connector into ABSCM until the
clamp locks onto it.
19
4-4cBRAKES [ABS 5.3 TYPE]
7. Diagnostics Chart for ABS Warning Light Circuit and Diagnosis Circuit Failure