1997 SSANGYONG KORANDO ignition switch

[x] Cancel search: ignition switch

Page 162 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1E 1 -- 10 M162 ENGINE ELECTRICAL
D AEW OO M Y_2000
Circuit Diagram
Inspection & Maintenance Procedure (for
MSE)
1. While the ignition switch is in ’OFF’ position, remove
the wiring connectors (1

Page 164 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual D AEW OO M Y_2000
SECTION 1F1
ENGINE CONTROLS
CAUTION: Disconnect the negative battery cable before removing or installing any electrical unit or when a
tool or equipment could easily come in contact

Page 178 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE CONTROLS 1F1 -- 15
D AEW OO M Y_2000
FAILURE CODES TABLE (Cont’d)
Failure
codeSee
PageDescription
401F1 -- 51Purge control valve short circuit to battery
411F1 -- 51Purge control valve s

Page 186 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE CONTROLS 1F1 -- 23
D AEW OO M Y_2000
KAB1F150
Failure
CodeDescriptionTrouble AreaMaintenance Hint
17
Crankshaft position
sensor signal failure (no
engine revolution signal)Even through cam

Page 187 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1F1 -- 24 M162 ENGINE CONTROLS
D AEW OO M Y_2000
Crankshaft Position Sensor Output Wave Inspection
1. Measure the output wave between the ECM termi-
nals No. 99 and No. 100 using the scan tool or the

Page 191 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1F1 -- 28 M162 ENGINE CONTROLS
D AEW OO M Y_2000
Camshaft Position Sensor Output Wave Inspection
1. Measure the output wave between the ECM termi-
nals No. 104 and No. 106 using the scan tool or the
o

Page 196 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual M162 ENGINE CONTROLS 1F1 -- 33
D AEW OO M Y_2000
KAB1F170
Failure
CodeDescriptionTrouble AreaMaintenance Hint
56No. 1 knock sensor
signal failure
When recognition in more
than control gain threshold a

Page 199 of 2053

SSANGYONG KORANDO 1997  Service Repair Manual 1F1 -- 36 M162 ENGINE CONTROLS
D AEW OO M Y_2000
Spark Plug Cable Resistance Inspection
1. Turn the ignition switch “OFF” position.
2. Disconnect the spark plug cables Refer toSection 1E1, Engine
Page:   1-8 9-16 17-24 25-32 33-40 ... 184 next >