BO2821
BO3671
Adhesive
Adhesive
N12300
- BODYWINDSHIELD
BO-37
1996 TERCEL (RM440U)
10. INSTALL GLASS
HINT:
Confirm that the dam is attached the body panel as shown in
the illustration.
(a) Position the glass so that the reference marks are lined
up, and press in gently along the rim.
(b) Using a spatula, apply adhesive on the glass rim.
(c) Use a spatula to remove any excess or protruding adhe-
sive.
(d) Fasten glass securely until the adhesive sets.
11. INSPECT FOR LEAKS AND REPAIR
(a) Perform a leak test after the hardening time has elapsed.
(b) Seal any leaks with sealant.
Part No. 08833-00030 or equivalent.
12. INSTALL WINDSHIELD MOULDING
(a) Using a knife, cut off the adhesive around the moulding
installation area.
(b) Apply adhesive at moulding installation area.
(c) Place the moulding onto the body and tap it by hand.
13. INSTALL COWL LOUVER AND WIPER ARMS (See
page BO-26)
14. INSTALL INNER REAR VIEW MIRROR
15. INSTALL FRONT PILLAR GARNISH
16. INSTALL COWL LOUVER
17. INSTALL WIPER ARMS
