IG0J9−01
B11573
B11574
− IGNITIONDISTRIBUTOR
IG−13
1996 RAV4 (RM447U)
INSTALLATION
1. SET NO. 1 CYLINDER TO DTC/COMPRESSION
Turn the crankshaft clockwise, and position the slit of the intake
camshaft as shown in the illustration.
2. INSTALL DISTRIBUTOR
(a) Install a new O−ring to the housing.
(b) Apply a light coat of engine oil on the O−ring.
(c) Align the cutout of the coupling with the line of the hous-
ing.
(d) Insert the distributor, aligning the center of the flange with
that of bolt hole on the cylinder head.
(e) Tighten the hold−down bolt.
Torque: 19 N·m (195 kgf·cm, 14 ft·lbf)
3. CONNECT HIGH−TENSION CORDS TO SPARK
PLUGS
Firing order:
1 − 3 − 4 − 2
4. CONNECT HIGH−TENSION CORD TO IGNITION COIL
5. CONNECT DISTRIBUTOR CONNECTOR
6. INSTALL AIR CLEANER CAP ASSEMBLY
