1996 TOYOTA COROLLA Owners Manual

172
2. Unplug the connector while de-
pressing the lock release.
If the connector is tight, wiggle it.3. Turn the bulb and remove it. Install
the new bulb and install the connector.
To install a bulb, align the tabs of the bulb
socket with the cutouts of the mounting
hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.Use a Phillips-head screwdriver.
ÐParking and front side
marker lights
ProCarManuals.com

173
Use a Phillips-head screwdriver.
ÐFront turn signal lights
ProCarManuals.com

174
Use a wrench.
Remove and install the cover clips as
shown in the following illustrations.Use a Phillips-head screwdriver.
ÐRear turn signal, stop and
tail, rear side marker, and
back-up lights (sedan)
ProCarManuals.com

175
a: Rear turn signal light
b: Stop and tail light
c: Rear side marker, stop and tail light
d: Back-up lightUse a Phillips-head screwdriver.a: Rear turn signal light
b: Rear side marker, stop and tail light
c: Back-up light
ÐRear turn signal, stop and
tail, rear side marker, and
back-up lights (wagon)
ProCarManuals.com

176
Remove and install the cover clips as
shown in the following illustrations.Remove the bolts.
ÐHigh mounted stoplight
(sedan)
ProCarManuals.com

177
ÐHigh mounted stoplight
(wagon)
ProCarManuals.com

178
Use a Phillips-head screwdriver.
ÐLicense plate lights
(wagon) ÐLicense plate lights
(sedan)
ProCarManuals.com

179ProCarManuals.com