1996 Mercury Villager Owner's Manuals

ServicingYou rVillager
343
WARNING
Alway sreplac eafusewit hon etha tha sth especified
File:15vxsvn.ex

344
%*
[SV37000(ALL)01/93]
Engine Compartment Main Fuse Panel
[SV37100(ALL)06/95]
10-1/2 pica
art:0040303-A
Engine compartment main fuse panel
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

Servicing Your Villager
345
[SV37150(ALL)06/95]
twenty-two pica
chart:0040241-DFile:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

346
[SV37250(ALL)06/95]
eighteen pica
chart:0040328-A%*
[SV37900(ALL)03/95]
Circuit Breakers
[SV38000(ALL)01/93]
If you need to check a circuit breaker that is on the fuse panel,
seeFuses, checking and replacingin the Index to find out how to
locate the fuse panel.
[SV38100(ALL)01/93]
Since you need diagnostic equipment to check whether a circuit
breaker works and such equipment comes with instructions, we
do not discuss how to check circuit breakers. If you have
questions about circuit breakers or how to check them, see your
Lincoln-Mercury dealer.
*
[SV38200(ALL)10/92]
However, you should know that the circuit breakers will reset
themselves and allow the electrical parts to work again once the
overload on the circuit is removed. If the circuit breakers
continue to cut off electricity, have your vehicle's electrical
system checked.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

Servicing Your Villager
347
[SV38300(ALL)06/95]
If you replace a circuit breaker, use one with the same
amperage rating. To remove a circuit breaker mounted by the
fuse panel, grip it with your finger and thumb and pull it
straight out of its socket.
%*
[SV38400(ALL)10/94]
Relays
[SV38500(ALL)05/95]
Relays are devices which receive signals from components or
systems. After receiving signals, relays transfer these signals to
activate or deactivate other components or systems. A relay box
is located near the windshield washer fluid reservoir.
[SV38600(ALL)06/95]
10-1/2 pica art:0040207-F
The relay box
[SV38650(ALL)06/95]
ten pica chart:0040243-EFile:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

348
%*
[SV38700(ALL)03/95]
Lights and Bulb Replacement
*
[SV38800(ALL)01/95]
It is a good idea to check the operation of the following lights
frequently:
*
[SV38900(ALL)01/95]
n
headlamps
*
[SV38950(ALL)02/95]
n
high-mount brakelamp
*
[SV39000(ALL)01/95]
n
tail lamps
*
[SV39100(ALL)01/95]
n
brakelamps
*
[SV39200(ALL)01/95]
n
hazard flasher
*
[SV39300(ALL)01/95]
n
turn signals
*
[SV39400(ALL)01/95]
n
license plate lamp
%*
[SV39500(ALL)01/95]
The alignment of your headlamps should be checked if:
*
[SV39600(ALL)01/95]
n
oncoming motorists frequently signal you to turn off your
vehicle's high beams when you do not have the high beams
on
*
[SV39700(ALL)01/95]
n
the headlamps do not seem to give you enough light to see
clearly at night
*
[SV39800(ALL)01/93]
n
the headlamp beams are not pointed slightly down and to
the right
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

ServicingYou rVillager
349
WARNING
Handl ea haloge nheadlam pbul bcarefull yan dkee pout

350
[SV40600(ALL)09/93]
13-1/2 pica
art:0040222-B
The headlamp bulb assembly
[SV40700(ALL)01/93]3.
Remove the bulb retaining ring by turning it
counterclockwise 1/8 of a turn to free it from the socket.
Then slide the ring off the plastic base. Keep the ring.You
must use it again to hold the new bulb in place.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996