1996 Mercury Villager Owner's Manuals

Safety Restraints
47
[SR21200(ALL)06/95]
17-1/2 pica
art:0040321-A
Second row bench built-in child seats
[SR21225(ALL)06/95]
Built-In Child Seat Retractors
[SR21250(ALL)06/95]
The retractor will switch from the emergency locking mode to
the automatic locking mode when the right shoulder belt is
pulled all the way out. The retractor will switch back to
emergency locking mode when the belts are unbuckled and the
shoulder belts retract completely.
[SR21275(ALL)06/95]
The automatic locking mode must be used to hold small
children in position, particularly sleeping children and those
who may try to squirm out of the belts. The emergency locking
mode is used while buckling the belts.
*
[SR21300(ALL)12/95]
Always adjust the lap and shoulder harness belts provided with
this child seat snugly around your child.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

48
[SR21350(ALL)06/95]
RWARNING
The child seats' metal and plastic parts can become very
hot when left in the sun. These can cause burns to
unprotected skin.
*
[SR21375(ALL)08/95]
RWARNING
Failure to follow all of the instructions on the use of this
child restraint system can result in your child striking the
vehicle's interior during a sudden stop or crash.
[SR21400(ALL)06/95]
How to Use the Built-In Child Seat
[SR21425(ALL)05/96]
Read the following procedures and all of the labels on the
built-in child seat before using the seat.
*
[SR21450(ALL)08/95]
RWARNING
Never use the Built-In Child Seat as a booster cushion
with the adult safety belts. A child using the adult belts
could slide forward and out from under the safety belts.
[SR21475(ALL)06/95]1.
Hold the tab from the lower outboard side of the child seat
and lower the cushion completely.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

Safety Restraints
49
[SR21500(ALL)06/95]
13-1/2 pica
art:0040322-AFile:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

50
[SR21525(ALL)06/95]2.
If connected, unbuckle the two safety belt tongues. Also
detach the chest clip.
[SR21530(ALL)06/95]
17-1/2 pica
art:0040320-AFile:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

Safety Restraints
51
[SR21550(ALL)06/95]
17-1/2 pica
art:0040319-AFile:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

52
[SR21575(ALL)06/95]3.
Place the child in the built-in child seat. Position the crotch
belt buckle between the child's legs.
[SR21600(ALL)06/95]
13-1/2 pica
art:0040323-AFile:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

Safety Restraints
53
[SR21625(ALL)06/95]4.
Place the left shoulder belt harness over the child's left
shoulder. Insert the left shoulder harness tongue into the left
side of the belt buckle. Confirm that the left shoulder
harness tongue indicator is green.
[SR21650(ALL)07/95]
13-1/2 pica
art:0040324-A[SR21675(ALL)06/95]5.
Place the right shoulder belt harness over the child's right
shoulder. Insert the right shoulder harness tongue into the
right side of the belt buckle. Confirm that the right shoulder
harness tongue indicator is green.
[SR21700(ALL)06/95]6.
Fasten the two halves of the chest clip below the child's
shoulders. Adjust the clip to comfortably hold the shoulder
belts in place on the child's chest. Confirm that the chest clip
indicator is green.
[SR21725(ALL)06/95]
NOTE: The chest clip can be easily pulled apart and is
designed to separate during a collision.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

54
[SR21750(ALL)07/95]7.
Pull the right shoulder belt fully out to put the retractor into
the locking mode. At this time, the shoulder belts are in an
automatic locking mode. Allow the safety belts to tighten
snugly against the child's shoulders. The belt will
automatically lock and cannot be pulled out.
[SR21775(ALL)06/95]
17-1/2 pica
art:0040325-A[SR21800(ALL)06/95]8.
If the shoulder belts are too tight, unlatch the chest clip and
unbuckle the child from the built-in child seat. Allow the
shoulder belts to retract fully. Repeat the procedure from
step 3 through step 7.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996