1995 Oldsmobile Achieva oil

Using Solvent-Type Cleaner on Fabric
First, see if you have to use solvent-type cleaner at all.
Some
spots and stains will clean off better with just
water
and mild soap.
If you need to LIS~ a solvent:
0 Gently scrape excess soil from the trim material with
a clean, dull knife or scraper. Use very little cleaner,
light pressure
and clean cloths (preferably
cheesecloth). Cleaning should start
at the outside of
the stain, "feathering" toward the center. Keep
changing
to a clean section of the cloth.
0 When you clean a stain from fabric, immediately dry
the area
with a blow dryer to help prevent a cleaning
ring. (See the previous
NOTICE.)
Special Cleaning Problems
Greasy or Oily Stains
Stains caused by grease, oil, butter, margarine, shoe
polish, coffee
with cream, chewing ~LIIII, cometic
creams. vegetable
oils, wax crayon, tar and asphalt can
be removed
as follows:
0 Carefully scrape off excess stain.
Follow the solvent-type instructions described earlier.
0 Shoe polish, wax crayon, tar and asphalt will stain if
left on a vehicle seat fabric. They should be removed
as soon as possible. Be careful. because the cleaner
will dissolve them and may cause them to spread.
Non-Greasy Stains
Stains caused by catsup, coffee (black), egg, fruit, fruit
juice, milk, soft drinks, wine. vomit. urine and blood can
be removed
as follows:
Caref~111y scrape off excess stain, then sponge the
soiled area
with cool water.
If a stain remains, follow the foam-type instructions
described earlier.
If an odor lingers after cleaning vomit or urine, treat the
area
with a waterhaking soda sol~~tion: 1 teaspoon (5 ml)
of baking soda to 1 CLIP (250 1111) of lukewarm water.
If needed, clean lightly with solvel~t-type cleaner.
6-43

Combination Stains
Stains caused by candy, ice cream, mayonnaise, chili
sauce and unknown stains can be removed as follows:
0 Carefully scrape off excess stain, then clean with
cool water and allow to dry.
0 If a stain remains, clean it with solvent-type cleaner.
Cleaning Vinyl
Use warm water and a clean cloth.
0 Rub with a clean, damp cloth to remove dirt. You
may have to do it more than once.
0 Things like tar, asphalt and shoe polish will stain if
you doll’t get them off quickly. Use a clean cloth and
a GM Vinyl/Leather Cleaner or equivalent product.
Cleaning Leather
Use a soft cloth with lukewarm water and a mild soap or
saddle soap.
For stubborn stains, use a GM VinyVLeather Cleaner
or equivalent product.
0 Ncwr use oils, varnishes, solvent-based or abrasive
cleaners. furniture polish or shoe polish on leather.
0 Soiled leather should be cleaned immediately. If dirt
is allowed to work into finish,
it can harm the
leather.
Cleaning the Top of the Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrunlent panel. Sprays containing silicones or
waxes
may cause annoying reflections in the windshield
and even mike
it difficult to see through the windshield
under certain conditions.
6-44

Cleaning the Outside of Your
Oldsmobile
The paint finish on your vehicle provides beauty, depth
of color, gloss retention and durability.
Washing Your Vehicle
The best way to preserve your vehicle’s finish is to keep
it clean by washing it often with lukewarm or cold
water.
Don’t wash your vehicle in the direct rays of the sun.
Don’t use strong soaps or chemical detergents. Use
liquid hand, dish or car washing (mild detergent) soaps.
Don’t use cleaning agents that are petroleum based, or
that contain acid or abrasives. All cleaning agents
should be flushed promptly and
not allowed to dry on
the surface, or they could stain. Dry the finish with
a
soft, clean chamois or a 100% cotton towel to avoid
surface scratches and water spotting.
High pressure vehicle washes may cause water to enter
your vehicle.
Finish Care
Occasional waxing or mild polishing of your
Oldsmobile
by hand may be necessary to remove
residue from the paint finish. You can get
GM approved
cleaning products from your retailer. (See “Appearance
Care and Materials”
in the Index.)
Your Oldsmobile
has a “basecoatlclearcoat” paint finish.
The clearcoat gives more depth and gloss to the colored
basecoat. Always use waxes and polishes that are
non-abrasive and made for
a basecoatklearcoat paint
finish.
I NOTICE:
Machine compounding or aggressive polishing on
a basecoat/clearcoat paint finish may dull the
finish
or leave swirl marks.
Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird
droppings, chemicals from industrial chimneys, etc. can
damage your vehicle’s finish if they remain on painted
surfaces. Wash the vehicle as
soon as possible. If
necessary,
use non-abrasive cleaners that are marked
safe
for painted surfaces to remove foreign matter.
6-46

Engine Specifications
2.3L
Quad 4
VINEngineCode ................................. D
Type ............................................ L4
Displacement
.................................. 2.3 Liters
Compression Ratio
............................... 9.5: 1
Firingorder
.................................... 1-3-4-2
Thermostat Temperature
....................... 180°F (82°C)
3.1L
V6
M
V6
3.1 Liters 9.6:
1
1-2-3-4-5-6
195
OF (91 "C)
Normal Maintenance Replacement Parts
Air Cleaner Element
Engine
Oil Filter
All engines ...................................... AC Type A- 1233C
2.3L Quad 4
..................................... AC Type PF- 1225
3.1LV6
........................................ ACTypePF-47
3.1L V6
........................................ AC Type CV-892C
2.3L Quad 4
..................................... AC Type 41 -9 10 (Platinum Plug)
3.1L V6 ........................ ........... AC Type R44LTSM6
PCV Valve
Spark
Plugs
Gap: 0.060 inch (1.52 mm)
Gap: 0.060 inch (1.52 mm)
6-57

1 Section 7 Maintenance Schedule
I
IMPORTANT:
KEEP ENGINE OIL
AT THE PROPER
LEVEL AND CHANGE AS
RECOMMENDED
I
This section covers the maintenance required for your
Oldsmobile. Your vehicle needs these services to retain
its
safety, dependability and emission control performance.
I Plan I
Introduction
Your Vehicle and the Environment
Proper vehicle maintenance not only helps to keep your
vehicle in good working condition, but also helps the
environment. All recommended maintenance procedures
are important. Improper vehicle maintenance or the
removal
of important components can significantly
affect
the quality of the air we breathe. Improper fluid
levels or even the wrong tire inflation can increase the
level of emissions from your vehicle.
To help protect our
environment, and
to help keep your vehicle in good
condition, please maintain your vehicle properly.
7-1

Maintenance Schedule
I Schedule I Definition I
Follow Maintenance Schedule I if any one of these is
true for your vehicle:
Most trips are less than 5 to 10 miles (8 to 16 km).
This is particularly important when outside
temperatures are below freezing.
0 Most trips include extensive idling (such as frequent
driving
in stop and go traffic).
0 Most trips are through dusty areas.
You frecp~ently tow a trailer or use a carrier on top of
your vehicle. (With some models, you should never
tow
a trailer. See “Towing a Trailer“ in the Index.)
Schedule
I should also be followed if the vehicle is used
for delivery service, police, taxi, or other commercial
application.
I Schedule I Intervals I
Every 3,000 Miles (5 000 km) or 3 Months,
Whichever Occurs First
Engine Oil and Filter Change
Every 6,000 Miles (10 000 km) or 6 Months,
Whichever Occurs First
Chassis Lubrication
At 6,000 Miles (10 000 km) - Then Every
12,000 Miles (25
000 km)
Every 15,000 Miles (25 000 km)
Tire Rotation
Air Cleaner Filter Inspection, if driving in dusty
conditions
Every 30,000 Miles (50 000 km)
Air Cleaner Filter Replacement
Spark Plug Replacement (except 2.3L Code
D engine)
Spark Plug Wire Inspection (except 2.3L
Fuel
Tmk, Cap and Lines Inspection
Engine Accessory Drive Belt Inspection (or every
Cooling System Service (or every 24 months,
Code
D engine)
24 months, whichever occurs first)
whichever occurs first)
Every 50,000 Miles (83 000 km)
Every 100,000 Miles (166 000 km)
Automatic Transaxle Service (severe conditions only)
Spark Plug Replacement (2.3L Code
D engine only)
7-4

Maintenance Schedule
Follow Schedule I1 only if none of the conditions from
Schedule
I is true.
Every 7,500 Miles (12 500 km)
Engine Oil and Filter Change (or every 12 months.
Chassis Lubrication (or every 12 months, whichever
whichever
occurs first)
occ~~rs
first)
At 7,500 Miles (12 500 km) - Then Every
15,000 Miles
(25 000 km)
Every 30,000 Miles
(50 000 knl)
Tire Rotation
Engine Accessory Drive Belt Inspection (or every
Cooling System Service (or every
24 months.
Spark Plug Replacement (except 2.3L
Code D engine)
Spark Plug Wire Inspection (except 2.3L Code
D engine)
Air Cleaner Filter Replacement
Fuel
Tank. Cap and Lines Inspection
Automatic Transaxle Service (severe conditions only)
Spark Plug Replacement
(2.3L Code D engine only)
24 months, whichever occurs first)
whichever occurs
first)
Every 50,000 Miles (83 000 km)
Every 100,000 Miles (166 000 km)
7-5

I Maintenance Schedule I
The services shown in this schedule up to 100,000 miles
( 166 000 km) should be performed after 100,000 miles
(166 000 km) at the same intervals.
Footnotes
-1 The U.S. Environmental Protection Agency or the
California Air Resources Board has determined that the
failure to perform this maintenance item will not
nullify
the emission warranty or limit recall liability prior to the
completion of vehicle
useful life. We, however, urge that
all recommended maintenance services be performed at
the indicated intervals and the maintenance be recorded.
3,000 Miles (5 000 km)
0 Change engine oil and filter (or every
3 months, whichever occurs first).
An Emission Control Service.
DATE SERVICED BY ACTUAL MILEAGE
I I
7-6