Vehicle Damage Warnings
Also in this book you will find these notices: In
the notice area, we tell
you about something that can
damage your vehicle. Many times, this damage would
not be covered by your warranty, and it could be costly.
damage. But the notice will tell
you what to do to help avoid the
NOTICE:
When you read other manuals, you might see
I CAUTION and NOTICE warnings in different colors or
These mean there is something that in different words.
could damage your vehicle. You’ll also see warning labels on your vehicle. They use
yellow for cautions, blue
for notices and the words
CAUTION
or NOTICE.
iv
Lamps On Reminder
If you open the driver’s door and turn off the ignition
while leaving the lamps on,
you will hear a warning
chime.
Flash-to-Pass (Except Canada)
Flash-to-pass lets you use your high beam headlamps to
signal a driver
in front of you that you want to pass.
To use it, pull the turn signal/multifunction lever toward
Headlamp High/Low Beam Changer you.
To change the headlamps from low beam to high or high If your headlamps are off your high beam headlamps
will turn
on. They’ll stay on as long as you hold the to low, pull the turn signal lever all the way toward you.
Then release it. When the high beams are on, a blue
light
on the instrument panel also will be on. lever there. Release
thelever to turn them
off.
If your headlamps are on, there will be no flash-to-pass
feature. Use the lever
to change between high and low
beams.
2-36
