1995 JEEP XJ Service And Repair Manual

Page 585 of 2158

JEEP XJ 1995  Service And Repair Manual STARTING SYSTEM
INDEX
page page
Diagram Index............................ 1Starting System........................... 1
STARTING SYSTEM
AUTOMATIC TRANSMISSIONS
Circuit A0 from the battery is double cr

Page 586 of 2158

JEEP XJ 1995  Service And Repair Manual

Page 587 of 2158

JEEP XJ 1995  Service And Repair Manual

Page 588 of 2158

JEEP XJ 1995  Service And Repair Manual

Page 589 of 2158

JEEP XJ 1995  Service And Repair Manual FUEL/IGNITION
INDEX
page page
Automatic Shut Down (ASD) Relay............. 1
Battery Feed.............................. 1
Brake Switch Input......................... 5
Camshaft Position Sensor........

Page 590 of 2158

JEEP XJ 1995  Service And Repair Manual cuit A142 supplies voltage to the fuel injectors. Each
injector has a separate ground circuit controlled by
the PCM.
Circuit K11 provides ground for injector number
one. The K11 circuit connects to ca

Page 591 of 2158

JEEP XJ 1995  Service And Repair Manual Circuit G7 from the vehicle speed sensor provides
an input signal to the PCM. The G7 circuit connects
to cavity 47 of the PCM.
The PCM provides a ground for the vehicle speed
sensor signal (circuit G7

Page 592 of 2158

JEEP XJ 1995  Service And Repair Manual The PCM provides a ground for the engine coolant
temperature sensor signal (circuit K2) through circuit
K4. Circuit K4 connects to cavity 4 of the PCM con-
nector.
HELPFUL INFORMATION
Circuit K4 splic