Page 82 of 292

Downloaded from www.Manualslib.com manuals search engine Features and Controls
vlain Light Control
’he main light control is a knob that
vorks these lights:
b Headlights
b Taillights
Parking lights
b License lights
1 Sidemarker lights
b Instrument panel lights
rurn the knob to -w- to turn on your
leadlights and ot&?operating lights.
rurn the knob to
pg to turn on your
larking lights without your headlights.
rurn the knob to
“OFF’ to turn off the
ights.
Brightness Control
This switch controls the brightness of
your instrument panel lights. Turn the
switch to brighten or dim the lights. If yo1
turn the switch all the way up to
0w,
your courtesy lights will come on.
Lights On Reminder
If you turn the ignition “Off” and leave
the lights on, you will hear a chime when
you open the driver’s door.
Daytime Running Lights (Canada)
The Canadian Federal Government has
decided that “Daytime Running Lights”
(DRL) are
a useful feature, in that DRL
can make your vehicle more visible to
pedestrians and other drivers during
daylight hours.
DRL are required on new
vehicles sold in Canada.
Your DRL work with a light sensor on top
of the instrument panel. Don’t cover it up.
The front turn signal lights will come
on
in daylight when:
The ignition is on
The headlight switch is off, and
The parking brake is released.
At dusk, the exterior lights will come
on
automatically and the front turn signal
lights will go out. At dawn, the exterior
lights will go out and the front
turn signal
lights will come on (if the headlight
switch is off).
Of course,
you may still turn on the
headlights any time you need
to.
To idle your vehicle with the DRL off, set
the parking brake while the ignition is in
the
“Off” or “LOCK’ position. Then start
the vehicle. The DRL will stay
off until
you release the parking brake.
Page 85 of 292
Downloaded from www.Manualslib.com manuals search engine Twin Lift-off Roof
Panels (OPTION)
If you have this option, you can remove
one or both lift-off roof panels.
-~
The door key unlocks the panels. The
lock
is above the door window. Turn the
key to the left to unlock the panel. Then push
up on
the release handle to
unlatch the panel. Lift the outer edge
of
the panel and pull it toward you.
A CAUTION:
If a T-top panel is not stored
properly, it could be
thrown about
the vehicle
in a crash or sudden
maneuver. People
in the vehicle
could
be injured. Whenever you store
a
T-top panel in the vehicle, always
be sure that it is stored securely in
the correct storage slot with the T-top
handle closed.
83 .I
Page 86 of 292
Downloaded from www.Manualslib.com manuals search engine Features and Controls
Open the close-out panel completely.
Place the panel
in the correct slot
(“DRIVER” or “PASSENGER’) in the
rear area
of your vehicle. Make sure the
handle
is open and facing you when you
put
it in the storage slot. ’ush’the
handle closed
to secure the pane
n the slot. To lock each panel in the
torage area, use your door key. Reverse the steps above
to install the
T-top panels.
When installing panels, be sure
to align
weatherstrips properly. Panels incorrectly
installed may leak.
I NOTICE:
High pressure car washes may cause
water to enter your vehicle. Never
spray water directly at the roof panel
joints.
This will cause leaks.
... 84
Page 87 of 292

Downloaded from www.Manualslib.com manuals search engine T-Top Sunshades
1. Start with the panel marked “DRIVER
FRONT.” Unlatch the driver-side
T-top, raise
it halfway and close the
latch handle.
2. With the top raised and resting on the
center roof rail, slide the flat edge of
the sunshade panel
(with the vinyl
side to the glass) between the glass
and plastic trim, making sure the
edge marked “DRIVER FRONT” is
pointing to the front
of the vehicle.
3. Open the latch and close the T-top.
Check to see
if there are any gaps
showing. Unlatch the T-top and adjust
the sunshade as required.
4. Once the sunshade is installed
properly, you can stick the Velcro@
buttons on the glass
for a proper fit
every time you install the sunshades.
To do this, first remove the T-top with
the sunshade installed and place it
upside down on a table or bench.
Tdke care not
to scratch the glass.
-
5. Pull the sunshade back a little and
remove the backing paper from the
Velcro@ buttons. Push the sunshade
back into place sticking the Velcro@
to the glass.
6. Install the T-top, close the latch and
lock the T-top. Repeat the above steps
for the passenger-side sunshade.
85.
Page 88 of 292
Downloaded from www.Manualslib.com manuals search engine Features and Controls
.:*:;r
You can store the sunshades two different
ways:
1. When the T-tops are in use, store the
sunshades
in their storage area in the
rear
of the vehicle and make sure
the close-out panel
is in its closed,
upright position.
2. When you have the T-tops off, and in
their storage slots, store the sunshades
on the T-tops
in their installed
position.
Storage and
Compartments
Glove Box
To open the glove box, lift up on the
lever. Use your door key to lock
and
unlock it. The glove box has a light
inside.
Map Pocket
Each door has a map pocket.
... 86
Page 90 of 292
Downloaded from www.Manualslib.com manuals search engine Features and Controls
Close-Out Panel
The close-out panel can be closed for
hidden storage
in the rear area of your
vehicle.
To remove the close-out panel:
1. Close the panel. If the close-out panel
is not closed and resting on the trim
panel, it cannot be removed.
2. Pull the panel toward you to unsnap it.
Then slide the close-out panel along
the groove
in the trim panel.
Reverse the steps to install the panel.
a
When carrying large or heavy items, it is
a good idea to open the panel and place
the items
in the rear area.
Sun Visors
To block out glare, you can swing down
the visors. You can also swing them to the
side. The elastic bands on your visor
provide extra strorage for maps or papers.
Covered Visor Vanity Mirror
Pull down the sun visor and lift the cover
to expose the vanity mirror.
. ..%a
Page 97 of 292

Downloaded from www.Manualslib.com manuals search engine If the light comes on while you are
driving, pull off the road and stop
carefully.
You may notice that the pedal is
harder to push. Or, the pedal may go
closer to the floor. It may take longer to
stop. If the light is still on, or
if the
anti-lock brake system warning light is
flashing, have the vehicle towed for
service. (See “Anti-Lock Brake System
Warning Light” and “Towing Your
Vehicle”
in the Index.) The
brake system warning light
will also
come on when you set your parking
brake, and
it will stay on if your parking
brake doesn’t release
fully. If it stays on
after your parking brake is
fully released,
it means you have a brake problem.
A CAUTION:
Your brake system may not be work-
ing properly if the brake system
warning light
is on. Driving with the
brake system warning light on can
lead to an accident. If &e light is still
on or if the anti-lock brake system
warning light is flashing after
you’ve
pulled off the road and stopped care-
fully, have the vehicle towed
for ser-
vice.
Anti-Lock Brake System Warning Light
With anti-lock, this light will come on
when you start your engine and
it will
stay on for three seconds. That’s normal.
If the light doesn’t come on, have it fixed
so it will be ready to warn you if there is a
problem.
If the light flashes when you’re driving,
you don’t have anti-lock brakes and
there’s a problem with your regular
brakes. Pull off the road and stop
carefully. You may notice that the pedal is
harder to push. Or, the pedal may go
closer to the floor. It may take longer to
stop. Have the vehicle towed for service.
(See “Towing Your Vehicle” in the
Index.)
95 ...
Page 98 of 292

Downloaded from www.Manualslib.com manuals search engine Features and Controls
ABS
INOP
... 96
If the anti-lock brake system warning
light stays on longer than normal after
you’ve started your engine, turn the
ignition off. Or, if the light comes on and
stays on when you’re driving,
stop as
soon as possible and turn the ignition off.
Then start the engine again to reset the
system. If the light still stays on, or
comes on again while you’re driving,
your Chevrolet needs service. If the light
is on but not flashing and the regular
brake system warning light isn’t on, you
still have brakes, but you don’t have
anti-lock brakes.
P
S
V
li
C
C
a
S
’I
d li
rt
il
C
Lb
0
Lcceleration Slip Regulation (ASR)
lystem Warning Light (Option)
Vhen the ASR system is off, the “ASR”
ght
will come on. This light will also
ome on for three seconds as a bulb
heck each time you start your vehicle
nd if there’s a system failure. See
Acceleration Slip Regulation (ASR)
lystem”
in the Index.
‘he ASR system will shut down partially ue to brake overheating but the
“ASR”
ght will not come on. If there is throttle
:laxer overheating, the “ASR” light will
luminate and the system will shut down.
hce everything cools off, the system will
perate norma
.lly again.