1987 MAZDA 626 torque

7B INSTALLATION
27. Connect the connectors as follows:
(1) Inhibitor switch
(2) Solenoid valve
(3) Pulse generator (G4A-EL)
(4) Fluid temperature switch (G4A-EL)
28. Connect the speedometer cable.
76G07B-199
76G07B-200
76G07B-201
29. Install the fresh air duct. (G4A-HL)
30. Install the air cleaner hose. (G4A-EL)
31. Install the air cleaner assembly; then connect the
air flow meter connector and inlet hose. (G4A-EL)
Tightening torque:
Bolt
31—40 N-m (3.2—4.1 m-kg, 23—30 in-lb)
Nut
8—11 N-m (80—110 cm-kg, 69—95 in-lb)
32. Connect the distributor lead.
33. Install the main fuse block.
Tightening torque:
8—11 N-m (80—110 cm-kg, 69—95 in-lb)
34. Install the battery carrier and battery.
Tightening torque:
31—40 N-m (3.2—4.1 m-kg, 23—30 in-lb)
35. Pour in ATF and check the following:
(1) With the engine idling, check that the fluid lev-
el is between the F and L marks on the dip-
stick. (Refer to page 7B—71)
(2) Check the manual linkage, and adjust if neces-
sary. (Refer to page 7B—72)
(3) Check the inhibitor switch operation. (Refer to
page 7B—65)
(4) Conduct a road test. (Refer to page 7B—34,
35)
(5) Check that there is no fluid leakage from the
transaxle. (Refer to page 7B—71)
76G07B-202
7B—220

OD
IV) K>
2-4 brake band
—Coasting clutch pressure brake pressure
To oil cooler
N-R accumulator 12-3 accumulator
2-3 Timingr valve 18 Coasting bypass valve Bypass valve Servo control y valve (Blocked)
Pressure modifier valve (Blocked)
3-4 shift valve
Low reducing valve
Pressure regulator valve 3-2 timing valve 3-2 Icapacity valve
Manual valve
Throttle valve
Oil pump
• Throttle pressure
1 Throttle modulated pressure
• Line pressure
I Torque converter pressure Forward clutch pressure\^
Reverse clutch pressure—_____
1-2 accumulator
Throttle back-up valve (Blocked)
-j Throttle J modulator I valve
Apply side 9
Lock-up control valve
-< O
u >
o
o
J3 o
Q >
• m
-< o
3D >
C n
O
O
J3 o
a •C* > • m
-si
CD

Apply side 9
Throttle pressure
Throttle modulated pressure
Line pressure
Operating line pressure

1
Torque converter pressure
30 >
Z o m
U)
< O X >
o
o

55
o
0 >
1 m
I Oil pump

-vj
ro ro CO
2-4 brake band
Throttle valve
Low and reverse brake pressure [-Coasting clutch pressure|
1-2 accumulator To oil cooler 3r4-Clytch pressure Lock-up control valve
N-R accumulator imulator -3 accumulator
[2-3 Timingf valve Coasting
Bypass valve J Servo control < x ]_ valve (Blocked)
Pressure modifier valve (Blocked)
Throttle modulator valve
Throttle back-up "valve (Blocked) Low reducing valve
Pressure regulator valve 3-2 timing valve 3-2
|
capacity valve
Throttle pressure
Throttle modulated pressure
Line pressure
Torque converter pressure
Forward clutch pressure
Reverse clutch pressure
) Oil pump

Apply side 9 Throttle pressure
Throttle modulated pressure
Line pressure
Torque converter pressure
I Oil pump

-Nl CD
(V) r\D cn
2-4 brake band
Release side-
Throttle valve
Low and reverse brake pressure Coasting clutch pressure!
•To oil cooler 3-4 clutch pressure:
N-R accumulator accumulator 12-3 accumulator
is [2-3 Timing! valve Coasting bypass valve Bypass valve Servo control * valve (Blocked)
£j] Pressure J modifier I valve x (Blocked)
3-4 shift
|
valve Lp-j Throttle
•
R» modulator I211 valve
Low reducing valve
19 Pressure regulator valve 20 3-2 timing valve sin L
1 n
in ^ * I
S

Manual valve 3-2 D capacity valve
Forward clutch pressure— ^
Reverse clutch pressure
1-2 accumulator
I Throttle pressure
i Throttle modulated pressure
| Line pressure
| Operating line pressure
] Torque converter pressure
Throttle back-up valve (Blocked)
Lock-up control valve
o
3D >
Z o m
to H D m > 3
X -<
D ZJ >
O
O
U O c
o >
• m
w

mm
2-4 brake band
Throttle valve
-Coasting clutch pressure| Low and reverse brake pressure
3-4 clutch pressure To oil cooler Lock-up control valve
accumulator N-R accumulator accumulator
valve Coasting bypass valve Bypass valve Servo control x x valve (Blocked)
Pressure modifier valve (Blocked)
Throttle modulator valve
1-2 shift valve
Low reducing valve
(Blocked)
19 Pressure regulator valve 3-2 timing valve 3-2 Jcapacity valve
Manual valve
Apply side
Forward clutch pressure^
Reverse clutch pressure^-
1-2 accumulator
I Oil pump
!•• Throttle pressure
l^M Throttle modulated pressure
i^B Line pressure
HH Operating line pressure
I i Torque converter pressure
Throttle back-up valve

CD
ro r\D -vi
2-4 brake band
Release side'
Low and reverse brake pressure /pasting clutch pressure
•To oil cooler issure Lock-up control valve
N-R accumulator imulator }2-3 accumulator
18 Coasting
11 Bypass valve Servo control x valve (Blocked)
Pressure modifier valve (Blocked)
Throttle JBij modulator 2i I valve
3-4 Shift valve
1-2 shift valve
Throttle back-up valve (Blocked) Low reducing valve
19 Pressure regulator valve 20 3-2 timing valve 3-2 capacity valve
Thrott e valve
Forward clutch pressure.
Reverse clutch pressure-^^
1-2 accumulator .
Apply side 9
Oil pump
| Throttle pressure
Throttle modulated pressure
IHH Line pressure
Operating line pressure
I I Torque converter pressure
Manual valve