Fuel pump x Fuel tank
Fuel inlet pipe x Fuel tank
Fuel tank band x Body
Cold start injector x Air intake chamber
Cold start injector tube x Cold start injector
Cold start injector tube x Delivery pipe
Fuel pressure regulator x Delivery pipe
Delivery pipe x Intake manifold
No. 2 fuel pipe x Delivery pipe
Air intake chamber x Intake manifold
EGR pipe nut
No. 1 engine hanger
Air intake chamber stay
No. 1 RH engine mounting stay x Air intake chamber
No. 1 RH engine mounting stay x RH engine mounting insulator
Throttle body x Air intake chamber
ISC valve x Air intake chamber
Specifications (Cont'd)
Torque Specifications
Intake air temp. 20°C (68°F) Measuring plate fully closed
Coolant temp. 60°C (176°F)
Union bolt type
Flare nut type Measuring plate fully open Throttle valve fully dosed
Throttle valve fully closedThrottle valve fully open Throttle valve openSTD resistance (fl)
Part tightened ECU (cont'd)
Resistance
Terminals
Condition
Fuel line
± SERVICE SPECIFICATIONSEFI System (2VZ±FE)A±16
Remarks:
* 1 2VZ±FE only
* 2 3S±FE only
* 3 Camshaft timing pulley
* 4 Armature front bearing for 1.0 kW type
* 5 Rotor rear bearing
* fi Armature rear bearing
* 7 Rectifier end frame
* 8 E52 and E56F5 Injection Measuring
Tool Set
(No. 3 Union)
(No. 6 Union)
(No. 7 Union)
(No. 1 Union)
SST (SPECIAL SERVICE TOOLS) (Cont'd)
Injection Pump
Camshaft Bearing
Cone Replacer ER Fuel Pressure
Gauge
Injection Pump
Spline Shaft Puller Drive Shaft Holding
Toot Valve Clearance
Adjust Tool Set
Torque Wrench
Adaptor
Illustration
Clutch Guide Tool
Part Name
Part NO. SectionSR
± SST AND SSMSST (Special Service ToolsC±5
