Downloaded from www.Manualslib.com manuals search engine TURN SIGNAL 
•  MOVE 
UPWARD  -R.H.  TURN 
• MOVE DOWNWARD  -L.H. TURN 
ANE  CHANGE 
• MOVE UPWARD TO  1ST  STOP·CHANGE 
FROM LEFT TO  RIGHT LANE 
• MOVE DOWNWARD TO 1 ST STOP-CHANGE 
FROM  RIGHT  TO LEFT LANE 
• Headlight Baam Changer -With  the headlights  on, pull  the lever  toward you until  you hear  a click" then release· it. The lights will change  from 
low-beam  to high-beam 
or from  high-beam  to. low-heam.  When the high-beams  are on,  a blue  light  will appear  on the  instrument  panel. 
HEADLIGHT BEAM CHANGER 
(HEADLIGHTS  ON) 
PULL LEVER 
TOWARD YOU 
• 
Standard Windshield Wiper - The standard windshield  wiper system 
controls  are on the  end of the tum signal  lever. 
• For a single  wiping cycle,' tum the top of the  knob  toward you~ Hold 
it  there until· the  wipers  begin wiping,  then release  it. The wipers will stop after  one cycle. For several  cycles, hold the knob  in place  as long 
as  needed. 
• For steady  wiping at low speed, tum the top of the knob  away  from you to the first  stop. For high-speed wiping,  turn the knob  to the  next  stop. 
Turn the knob  back to "ofr' to turn  off the  wipers. 
•  Pulse  Windshield Wiper -The  optional  pulse windshield  wiper system 
lets  you  vary  the wiper  speed from a 25-second  delay between  sweeps up to 
the  normal 
low and  high  speeds of the standard  wiper. 
• The pulse  wipers  work the same  as the  standard  wipers, except for the 
delay  feature. To use the  wipers  with a delay  between  sweeps, turn the 
top of the turn  signal  knob away  from you to the  first  stop.  Then,  turn 
the "Wipe  Delay" knob on the  instrument  panel to control  the amount 
of delay. 
• Turn the "Wipe  Delay" knob to the  left  to increase  the amount of delay 
between sweeps. Tum it  fully  to the  right  for steady  wiping at low. speed. 
• Windshield Washer -To  spray  washer  fluid on the  windshield,  push in the end of the tum signal  knob. (This will also  turn  on the  low-speed  wipers.) 
The  spray  will continue  as long  as you  hold 
in the knob. 
After  using the windshield  washer, turn the knob  back to 
"off" to turn ofT the 
wipers. 
With  the pulse  wiper  system,  the wipers 
will automatically  stop (or return  to the 
action  for which  they were  set) after  completing  the wash  cycle. 
2-7